BIKERNET GOTTA GO TO HAWAII NEWS–LATEST ISSUE OF HOT BIKE, SPS AND JOHNNY HUMBLE BIKE FINISHED, SIMPLY WOW CLEANING PRODUCTS, BUY ART HERE AT BIKERNET, PRO STREET OPEN HOUSE IN HAWAII THIS SUNDAY, JIMS TOOL OF THE WEEK, CUSTOM CYCLE ENGINEERING CATALOG, FUEL INJECTION TUNING FROM S&S EZFI, RIVERA CARB KITS FROM CCI AND NASTY NEWS INTRO.

What the hell?

There’s more going on than I could shake an 80-spoke wheel at. Biketoberfest is scrambling, Bike clubs are leaving the Hawaiian Islands, another new motorcycle manufacturer is starting, a town in Florida tried to outlaw bikes and new bike products are popping up everywhere.

Of course Bikernet is trying to make all these transitions as easy as possible. We’re working with JIMS machine to bring you all the special tools you need to accomplish your job. Watch for the techs coming up.

Let’s hit the news, I’ve got to jump on a plane for Hawaii to check out the club scene and be there for Deacon’s Grand Opening of Pro Street Custom Cycles on the Windward side on Sunday the 21st from 1-5. I’m going to bring a batch of photos of the Assalt Weapan, if you want a shot of the World’s Fastest Panhead signed by the guy who swept the shop on Wednesdays-no problem. Let’s hit the news:

CUSTOM CHROME OFFERS SU ELIMINATOR II CARBURETOR KITS BY RIVERA–Kits include SU “Eliminator II” carburetor with polished dome, chrome air filter, chrome velocity stack, chrome leveling bracket, intake manifold, push-pull throttle bracket, and comprehensive instructions. Carbs are jetted for stock engines.

Two extra needles are included to cover most modified engines including strokers to 86 cubic inches. Kits Include solid mount, upswept manifold that works with most fuel tanks including 5.0 gallon Fat Bobs.

Distributed by Custom Chrome; view our online catalog at www.customchrome.com

IS CARB (CALIFORNIA AIR RESOURCES BOARD) OUT OF CONTROL?–I spoke to Todd Erdmann today (Owner of TMCC, Thunder Mountain Custom Motorcycles) about the CARB settlement he just paid (See below). It was just as I thought. TMCC inadvertently sent ’07 motorcycles to CA dealers with ’06 engines and ’06 CARB engine labeling. It was an oversight, not an intentional action. Todd believes a disgruntled past employee contacted CARB to blow the whistle. The motorcycles had the proper pollution control equipment, but the wrong engine label and the ’07 paperwork wasn’t submitted. In effect, TMCC paid $257,000 for a paperwork and labeling error. There never was a pollution issue. Adding more pain to this situation, TMCC’s San Diego, Orange County and San Clemente dealers canceled their TMCC franchise, even though TMCC paid all of CARB’s fines against its CA dealers.It is my opinion that CARB is out of control and will not stop their collection of ill-gotten gains until the industry fights back… HARD. They don’t care about air quality as much as they care about collecting fines. When are we going to say enough is enough? SEMA just won a fight with CA where the state wanted to do annual tests on 15-year old and older vehicles. I think we need to join forces with SEMA, the combination of the MIC and SEMA could be formidable.Additionally, there are a few good senators who want to float a bill to protect the vintage car and rodding community. They hope to pass Federal legislature that provides a path to build and title these vehicles. Why can’t we support them in their fight and add motorcycles to the mix?I recommend that the MIC discuss this matter in the next meetings of the MIC Aftermarket Committee and American V-Twin Committee.

GoTo: http://www.arb.ca.gov/enf/casesett/casesett.htm for an update on the settlements CARB has collected. Note the $1,000,000 settlement against Dynojet. I believe Dynojet is still an MIC member. How many more MIC members will pay the price of a corrupt CARB?

–David G. Koshollek
Tel: 928-445-8286

NEW FUEL INJECTION TUNING FROM S&S EZFI–Sometimes you just need a little extra help in tuning a bike. The addition of a high flow air cleaner and slip-on mufflers or a complete exhaust system can alter the flow characteristics of a fuel injected bike just enough to make the air/fuel ratio less than desirable. Adding or subtracting fuel is a necessity, but the minimal amount may not be enough to justify a complete fuel injection system replacement. This is where the S&S EZFI comes into play.

With simple adjustments handled with buttons and a screwdriver, you can add fuel where your bike needs it-and remove fuel where you don’t! Additionally the S&S EZFI impacts only fuel delivery, it makes no changes to the other stock ECM functions like turn signals, instruments or safety functions.

This add-on module is waterproof, requires no crimping or soldering of wires for installation and has available software (EZTune software) that allows you to custom tune separate front and rear cylinder maps using the S&S diagnostic cable (PN 55-1271). The EZFI is available to fit all Harley-Davidson motorcycles equipped with Delphi? fuel-injection including closed-loop models.

PN 106-0890 MSRP $189.95

BIKERNET PRODUCT OF THE WEEK–Guy goes in an adult store and asks for an inflatable doll.

Guy Behind the counter says, “Male or female?”

Customer says, “Female.”

Counter guy asks, “Black or white?

Customer says, “White.”

Counter guy asks, “Christian or Muslim?”

Customer says, “What does religion have to do with it?”

Counter guy says, “The Muslim one blows itself up.”

FORK TRUSS SUPPORTS FROM CCE–Our fork truss is truly a performance part. It dramatically improves front-end handling. The engineering design and sleek styling are obvious characteristics in this part. The compound arc, which sweeps upward and rearward simultaneously, imparts greater resistance to deflection, twisting and bending of the fork. The upward arch also provides additional fender clearance. The addition of large diameter holes spaced out to a maximum strength calculation helps keep unsprung weight to a minimum.

Installation is very simple and the disassembly of the front-end is not necessary. These trusses are designed to bolt securely to the lower sliders. Trusses are machined out of solid billet aluminum and can be purchased in a polished or chrome finish.

Custom Cycle Engineering
1970 Peacock Boulevard
f Oceanside, CA 92056
Phone: 800-472-9253
f Fax: 760-941-6489

NEW WEB-BASED MULTI-VENDOR MOTORCYCLE PARTS CATALOG EASES SHOPPING, ORDERING, INVOICING HEADACHES FOR BIKE SHOP OWNERS AND ALLOWS ANY SIZE CATALOG TO BE COMPARED SIDE BY SIDE–The easy-to-use application, called “the most exciting business tool to aid the motorcycle industry since the computer” by one user, allows shop employees-and customers who log onto a shop’s website-to search, compare and purchase motorcycle parts, accessories and apparel from multiple vendors with just a few mouse clicks.

Any purchases made on BikeShop Full Throttle are stored in the shop owner’s store application to be ordered at any time of their own choosing. As an added-value, the application sorts and then generates orders by distributor to be printed, mailed, faxed or sent on-line to the appropriate vendor. Further complementing BikeShop, Full Throttle’s innovative technology is an option whereby the application can be integrated with a V Twin customized Quickbooks Point of Sale or other dealer management systems for easy tracking and invoicing.

MAINSHAFT SPROCKET/PULLEYLOCKNUT SOCKET – 1/2″ drive–Heavy-Duty thick wall tube. Extra long two piece design, inner collar willretain wrench to nut for safer service work. 1-7/8 hex, 1/2 Drive.

No.94660-37A – Use on all Big Twins 1936-99. Use on Twin Cam 1999-05 FXD,1999-06 FL & 2000-06 FXST. Also aftermarket 6-speeds.

Suggested Retail Price $ 139.80

–JT Lepien
www.jimsusa.com

BIKETOBER CAUTION FLAG OUT FOR TEEN DRIVERS–With iPods, cell phones, text messaging and even good, old-fashioned conversation, it’s tough to keep young eyes on the road.

Crashes are the leading cause of death for teenagers, making up 36 percent of all deaths — more than 6,000 people — for this age group, according to the Centers for Disease Control and Prevention.And Florida is among the deadliest states in the country for young motorists, according to AAA and the National Highway and Traffic Safety Administration.

–BY MEGAN DOWNSFLORIDA TODAY

–from Rogue

STOP BY THE PRO STREET OPEN HOUSE–Pick up a Bikernet Sticker and a signed photo of the World’s fastest Panhead. Bandit will sign each and every one, since he’s the bastard who built the bike.

BIKERNET.COM RAREST AND MOST UNUSUAL SHOT OF THE WEEK–Hey Chief,I was saving this pic for my feature if and when the Von Zipper’s Mutha-Fokker bike gets done, but I’m building so off what this bike looked like, I figured that you might like to use it on the bikernet main page.

I came by the photo courtesy of Dr. MoZ in Darkest Scotland, so if you use it, please give the good old Dr. the archive photo credit.

–TBear

IT WILL ROCK YOUR OFFICE / MAN CAVE– There is nothing better than some quality art that makes your office, den, shop or garage look just right. Bikers around the world have voted these prints the best with their wallet. Take a look at what’s in the Black Market and upgrade your man cave.

Simply Wow Releases First Organic Cleaning Products for Motorcycles–August 21, 2007 – Idaho Falls, IDAHO – Not new to cleaning products, Source Direct Holdings, Inc. now offers a new, green cleaning product for the motorcycle industry; Simply Wow for motorcycles. Source Direct Holdings is established in the household and automotive cleaning industries for developing and manufacturing highly effective and non-toxic biodegradable cleaning and appearance products.

Located in the heart of the Eastern Idaho Technology Corridor, Source Direct Holdings provides cost-effective solutions that make life better. The public company guarantees that you will say “Wow” when you see how their products work on your motorcycle. Their products are all organic, meaning the consumer can rid themselves of all the other cleaners in their cabinet and replace them with one solution that doesn’t pollute our planet. Cleaning up messes and keeping the environment healthy is easy with Simply Wow!

Simply Wow is being introduced to the motorcycle industry because of the inherent qualities of the cleaning system. It is great for all motorcycle paint jobs because it is all organic, restores factory shine and removes bugs. It is safe for virtually all surfaces including black chrome and aftermarket window tint. It contains no harmful agents such as acid, hexane, silicone or petroleum distillates. Simply Wow is the cleaning system for any motorcycle.

For additional information, visit our web-site at www.simplywow.com or contact Deren Smith at: 877-529-4114.

BIKERNET READER BACK ON THE ROAD–Hey Bandit ! We got her bolted back together in time for the weekend so I picked it up Friday afternoon and I’ve been on it ever since ! Even rode it to the office today…two months without a bike is cruel…..all the new parts work except my fuel guage doesn’t light up at night ( wouldn’t ya know it ?! ) good thing it’s buried in the fairing and will be easy to get at…………shit.

BUT I ain’t complaining ’cause it looks great and rides great and I’m happy to have my bagger back

–Dusty

BIKERNET.COM/HOT BIKE SPS BIKE BUILD FOR IRAQI VET BUILT BY HIS BROTHER AND BIKERNET CORRESPONDENT–Hey boss, I posted the final episode before bike is given to my brother at the Hard Rock Roadhouse in Daytona and Biketoberfest. I have about 80 percent of the final assembly in there, then the final finished feature will be published in Hot Bike.

I will get you the finished bike shots after I get back as well as the presentation. Maybe, if your nice, I’ll even give you something from Biketoberfest. See ya, I’m getting on a plane in 3 hours!

Watch for these reports and the full feature in Hot Bike Magazine.

–Johnny

Johnny was supposed to build the SPS kit in his garage, but due to clumsy fingers and limited tools Lucky Devil Metal Works, in Houston, handled the final and the fine construction. Watch for the feature.–Bandit

NEWEST ISSUE OF HOT BIKE ON THE STANDS NOW–Hey, check out the newest issue of Hot Bike, on newsstands Oct.23. Darrenbuilt this Fat Boy in his living room with the help of metal shaper ColtonHardison, pretty impressive bike. Really shows what you can do with an H-Dif you put your mind to it.

We shot the bike as soon as we got into Sturgisthis past Aug. Then the bike proceeded to win at the Rat’s Hole and Metzelershows. Not bad for a rookie builder.

–Eric Ellis
Executive Editor
Hot Bike Magazine

Click here to subscribe.

Continued On Page 2

BIKERNET LAST PAGE THURSDAY NEWS–HAPPY TO MEETCHYAS FROM THE SMOKE OUT, RETRO RACKS FROM PAUGHCO, BAGGER TAIL COVERS FROM CYCLE VISION, TEXAS NATIONAL BIKE SHOW MOVED, 2WHEELERS PRODUCT OF THE WEEK, FLORIDA BIKE DEAL OF THE WEEK AND THE THOR ANTIQUE SOON TO BE FEATURED ON BIKERNET, PLUS THE STELLAR ENDING

Continued From Page 3

ORIGINAL PAINT THOR COMING TO BIKERNET.COM–5Ball- this un’s hot off the griddle–Don’s Auction bike for Bonham & Butterfield’s… I’ve pitched it to Maida, but for a few thousand I might let you have sloppy seconds…

–Cuff

SMOKE OUT WEST MEETING–My name is Daniel Garcia , I met you at the Horse Smkeout 2 . I did not get a chance to say thank you for having a badass web site. Your website helped me deal with the stress with being on deployments for example Guatanamo Bay, Cuba, Okinawa and Japan. When I was on deployment the only way I ever got to see choppers and bobbers was through your website and through the Horse Backstreet Choppers. I had my mother send the magazines to me every month. Now that I’m in California, I’ll be here for 3 yrs, as a Navy Instructor teaching Electrical Construction, I almost got sent to Iraq but lucky for me someone else filled the spot. But I’ll get my chance to go over there.

Well thanks again sir and thank you for this badass website it helps a lot when we’re overseas.

–Daniel Garcia
Construction Electrician Second Class Petty Officier Seabee Combat Warfare USN
garciad25@yahoo.com

P.SI ride a 2005 Night Train,1990 FXSTCAnd I ‘m working on a 1975 FLH that I’m going to make into a hardtailthis Tuesday I’m the frame it to a shop in Carson CA I don’t know shit aboutabout putting bikes together but I’m going to find out.

FLORIDA BIKE DEAL OF THE WEEK–Thought maybe you could post this somewhere for us.It’s a gorgeous bike and needs a new home.He will deliver!

It’s called Burnt Sunshine.Richard Castagna got a good deal on the whole drive train and motor kit from Southern Motorcycles Works out of Virginia for his next build. He haughtily speaks that the 2005 Ultima 113 inch motor along with its sister Ultima six speed transmission that pulls more torque, is less problematical and was much less expensive than the countless kits he researched before he purchased anything. Then he added a super G S&S carb for absolutely no breathing problems, a HI-4 Crane ignition and some swap meet specials like the exhaust pipes, lower legs and a freebie headlight, Richard was ready to rock and roll on this metal flake copper chopper.

There’s a hint of influence from the early Billy Lane days. This ride is indeed, modern and yes, different. Check out the low lying handlebars, reminiscent of the ones seen on a Discovery Channel Build Off between Lane and Indian Larry. They are, along with the fuel tank and rear fender, all one-of-a-kind pieces from South Florida fabricator Jerry Graves. The frame is also modified by Graves, with its geometric holes in the front slanted down tube. Also traditional cool, and space saving, is the oil tank in the front half of the rear fender which significantly opens up the space between motor and frame. A Brighton frame never looked so fresh.

Richard has live in South Florida since 1974. He opened his own tattoo shop in 1998. Knowledgeable and consistent about being healthy, Richard has been a body builder for several years, and says he’s fighting the aging process all the way! His new age heavy metal custom chop is a lot of entertainment for the man who actually built it in his garage. It turns a lot of heads, and Richard’s unassuming demeanor by no means falters at all the attention. His girlfriend, Jerilyn Scott, enjoys spending time with her man, whether it’s at the tattoo shop, on the road or posing for these pictures.

Richard credits John McAteer at Red Devil Cycles in Stuart with help in the “very little” wiring process. The alligator seat is from local upholstery master Scott Valentine, of Dead Animal Seats. Its real alligator and sits nicely solo atop the custom frame. The only good gator is a dead gator.

Richard wants to acknowledge Jerry Graves for all his skillful works and Chris McKevitt for laying down the metal flake House of Kolor Mother of the Sea Creature Pearl and Orange which reminds Richard of those early sixties toilet seats.

It is now for sale so he can build yet another piece of riding pie. You can own it when you call Richard’s cell at 772-215-7180 or Gothic City in Stuart, Florida 772-288-1633. Tell him I sent you.

Wear shades.

–Katmandu
katmandu74@bellsouth.net

THE BIKERNET VETENERY CLINIC SEMINAR– A little girl asked her Mom, ‘Mom, may I take the dog for a walk around the block?’

Mom replies, ‘No, because she is in heat.’

‘What’s that mean?’ asked the child.

‘Go ask your father. I think he’s in the garage.’

The little girl goes to the garage and says, ‘Dad, may I take Belle for a walk around the block? I asked Mom, but she said the dog was in heat, and to come to you.’

Dad said, ‘Bring Belle over here.’ He took a rag, soaked it with gasoline, and scrubbed the dog’s backside with it to disguise the scent, and said ‘OK, you can go now, but keep Belle on the leash and only go one time round the block.’

The little girl left and returned a few minutes later with no dog on the leash.

Surprised, Dad asked, ‘Where’s Belle?’

The little girl said, ‘She ran out of gas about halfway down the block, so another dog is pushing her home.’

–from Bogart

2WHEELERS BIKETOBERFEST PRODUCT OF THE WEEK– See the Winged Lady in Daytona on Main, or in Denver. $ 79.99, Base is 5″ by 8″1/2 wing spread. Two bolts on bottom. Wings can be wired to light up. Hey be creative.

TRANSFERABLE PLATES FOR MOTORCYCLES IN CANADA–In November of 2003 after presenting a proposal to ICBC, the B.C. Coalition of Motorcyclists and Blair Lekstrom, M.L.A. Peace River South were told that transferable plates for motorcyclists were “doable” and would be available in January 2005. After sending out press releases to that effect the Coalition was then informed that with the take over of the B.C. Utility Commission as the new regulator of ICBC the deal was off.

The Transferable Plate Program consists of strict rules to which motorcyclists must adhere to be eligible, for further info go to www.bccom-bc.com. Over the winter we are going to be pushing very hard to try and make this happen. If you would like to see this program implemented please sign our petition to be presented to the Provincial Government, The Honorable John Les, Solicitor General and Minister of ICBC, and the Insurance Corporation of B.C.

The petition will be available at the BCCOM booth at the Vancouver Toy Run on October 7th. If you are unable to attend the Toy Run we will also have the petition available at different events that we are attending coming up, including the Vancouver Motorcycle Show, January 24-27 at the Tradex in Abbotsford. If you are not planning to attend either of these events yet feel that you could get 100 signatures or more in your community. Please let us know and we can send you the forms. Thank you for your support!

–B.C. Coalition of Motorcyclists
Email: office@bccom-bc.com
Website: www.bccom-bc.com
Phone: (604) 580-0111 or 1-877-580-0111
“Working for Your Freedom to Ride!”

BIKERNET SHOTS FROM THE PAST–Bandit, I know you guys like pictures from the ” old days”. Here is one of the city mngr of Kansas City, LP Cookingham, testing a new Harley police bike in 1940.

–kink04fxd
e.kinkhorst@centurytel.net>

TEXAS NATIONAL BIKE SHOW MOVED TO NOBLIQUE STUDIOS– Not a typical gallery, not a typical studio, not typical at all really, the Nic Noblique Studio Gallery is an environment to inspire, educate, and simply enrich the community in a provocative, raw, and utterly uninhibited way. New to Galveston Island, Nic Noblique has relocated his art studio from Abilene, Texas to a 5,000 square foot warehouse space at 2527 Mechanic Street. More than just Noblique?s personal studio space, the warehouse contains a huge gallery showroom, skate ramp, and tattoo studio. As he explains, “this space is really the culmination of everything I enjoy, everything that inspires me” the studio gallery is an extension of everything that makes me tick and I want anyone and everyone to just come and explore and look at art and what art is from a broader lense.

The studio gallery?s most recent addition is The Tattoo Uprising by renowned Tattoo Artist Teri Turrentine, hailing from Northern California, now opening the third and most unique Tattoo Studio of her professional career of 14-years. Tattoo Uprising is located inside the Nic Noblique Studio Gallery in its own sculptural building designed and built by Noblique and Turrentine to mimic the motion and flow of the giant steel sculptures that grace the main floor of the gallery.

Things are really shaping up this year, we have open registration going on as we speak www.texasnationalbikeshow.com and already we are almost half way filled up. Also this year there will be NO ADMISSION fee to come in and see all of the beautiful bikes in the custom bike show, the phenomenal art work and all of the beautiful babes in the bikini show on Saturday, also don’t forget on Friday November 2nd from 7:00pm to 10:00pm we will have a “Meet and Greet ” the builders and artist involved with the studio and the bike show. Also make sure to reserve your spot to get some new ink from Teri and her guest artist’s while you are there.

See you at the show!

–Holly

BAGGER TAILS FOR SOFTAILS–Allows the installation of FLH? style Harley Davidson? hard or leather bags onto your Softail?. Made of high-quality steel. Black powder coated finish. Fits all Softail? models, except Deuce?. Excludes fiberglass bags and related locking mechanisms. Patent Pending. Note: Bagger Tail? may interfere with some larger seats and turn signals may need to be relocated.

Bagger Tail for Softails
CV-7200A Fits FL (Black Powder Coat Finish)
CV-7205 Fits FLH (Chrome Finish)
CV-7210 Fits 200 Series Tire-SE & 07 FLSTF? (Black Powder Coat Finish)
CV-7215 Fits 200 Series Tire-SE & 07 FLSTF? (Chrome Finish)

–CycleVisions
4263 Taylor Street n San Diego, California 92110
619.295.7800
www.CycleVisions.com

..:: GRAND NATIONAL LODGING ::.. While staying at the Larkspur Landing hotel in South San Francisco,California, they want you to feel right at home during the Grand NationalBike Show. That’s why they offer a variety of suite types to fit all of yourneeds. Choose from a Studio Suite, an Executive Suite or the Grand Suite.All of our suites feature fully equipped kitchens, the Larkspur signatureFeatherBorne Bed and pillow menu, a large work desk, complimentaryHigh-Speed Internet access, a DVD player and more.

Larkspur Hospitality Co.
690 Gateway Blvd
South San Francisco , CA 94080
Ph: (650) 827-1515
Fax: (650) 452-1009

–Spike Fletcher
Horse Power Promotions
Office 805 686-2007
sd@silcom.com
spikehpp@yahoo.com

THE CRAZED LAWS INVESTIGATION DEPARTMENT OF BIKERNET.COM–Mileage-Based Road User Charges Coming Soon? The U.S. Department of Transportation’s Federal Highway Administration has funded an expensive pay-as-you-drive research, development, and evaluation project with the thought to implementing such a program in the not-too-distant future. http://www.jbs.org/node/5710

VERY COOL RETRO RACKS– When it comes to restoration and resto-custom projects, Paughco has the industry covered. Check out these very cool, bolt on luggage racks. The closest thing to can get to the early original racks they are designed to fit just about any stock or 6″ wide from 1941 to present.

Fabricated from raw steel and flawlessly chrome plated these racks make for a slick addition to ant restoration or resto-custom and are as useful as they are cool to look at.

Paughco Luggage Racks retail for under a hundred bucks and can be ordered by calling 775-246-5738 or on the Web at www.paughco.com.

BIKERNET EDITOR DISCOVERS OSAMA BIN LADEN–While trying to escape through Pakistan, Osama Bin Laden found a bottle on the sand and picked it up.Suddenly, a female Genie rose from the bottle and with a smile said, “Master, may I grant you one wish?”

Osama responded, “You ignorant, unworthy daughter-of-a-dog! Don’t you know who I am? I don’t need any common woman giving me anything.”

The shocked Genie said, “Please, I must grant you a wish or I will be returned to the bottle forever!”

Osama thought a moment, then grumbled about the impertinence of the woman and said, “Very well, I want to awaken with three American women in my bed in the morning. So just do it and be off with you.”

The annoyed Genie said, “So be it!” and disappeared.

The next morning Bin Laden woke up in bed with Lorena Bobbitt, Tonya Harding, and Hillary Clinton at his side.His penis was gone, his knees were broken, and he had no health insurance!

–Bruce Snyder

CANADIAN RIDERS SURVIVES RUN HOME FROM ARIZONA SMOKE OUT–Hey man, I finally made it home. Awesome trip with great weather the whole way, until around Seattle, then it got wet, but no biggy on the road soffa.

I will send a few of the shots I took via email, and then put them all on a disk and shoot them off in the next day or so. I came home through Zion Park, man that place is unreal. After leaving Sedona, there was a lady who flopped over dead at a look out I was at, and people doing CPR for like almost an hour. Very sad indeed. Her family was all there by her side when the medics arrived to take over the cpr. It reminded me of how fragile life can be.

Once again, thanks for letting me be part of the adventure. I had an unbelievable trip. Got to meet some great people, and hanging with Bandit and crew for a few days was the best.

I am working on a couple of stories. One about the sidecar adventure with the kids, and another about the Smokeout. I will shoot them to you asap.

Watching the rain pour down from my office window, dreaming of cruizing the AZ desert…

–E Out… <(((><

SHE WAS A TEN AT TWO AND A TWO AND TEN–Wait till you read the Smoke Out report from the road leading from Parker, Arizona to Cottonwood, Arizona. We’ve got some slick slogans, wild stories and dusty boots.

This weekend I plan to run through all the Bonneville 2007 chapters and make sense outta them for the Wolfgang book. That’s the major project, but we have some other surprises including a monster Softail Tech from the Wolfgang book mentioned in the news. We also have two new Girls of Bikernet waiting in the wings. Do you want the blonde hottie on the European chopper or another tortured and tattooed broad from Denver? What’s Curt do to these broads?

Plus I’ll work with Lee Clemens on a Bonne Belle tech, and I’m waiting for some info from John Green and some shots of Ralph Randolph’s Knockout bike. Steve Blevins won it at the ER Chillocothe Rodeo and it’s a sharp scooter. More features are coming from the Troll family and Route 66 Choppers, an Australian builder, plus a wild Japanese built H-D Shovelhead from right here in LA. Hang on.

Hell, the W8less rotors are in. We have a Smoke Out Torrian Vest road test and a set of travelin’ tools from Starwest. Did I say slow down?

Let’s ride

–Bandit

BIKERNET ALMOST DONE THURSDAY NEWS– JIMS TOOL OF THE WEEK, BANDIT RACING INTERVIEW ON BIKERNET RADIO, NEW FROM NASH MOTORCYCLES, W8LESS ROTORS NOW AVAILABLE, FLORIDA EVENTS, PUERTO RICO PASSES STRICT MOTORCYCLE LAWS, WHIPLASH PHOTO ART, NEW SHOP IN HAWAII–PRO STREET GRAND OPENING! AND JOHNNY HUMBLE BROS BIKE ALMOST DONE.

Continued From Page 2

Here’s Kent’s installation of the Glenn Priddle seat.

BIKERNET IRAQI VETERAN SPS PROJECT TO BE GIVEN TO SOLDIER IN DAYTONA–After working 10 hours yesterday at my regular job, I was elated to find the parts you sent me sitting on my front patio. I immediately grabbed them up and carted everything to Lucky Devil’s Metal Works in Houston, where we worked until 4:30 this morning.

I would have kept going, but I had to come back to my regular job and do 8 hours today. At this time, the H-D drivetrain is in, SPS oilbag set, coil and ignition wired in, and the front end is assembled and hanging from the neck.

Thanks again, and watch for updates on Bikernet.com. I will also have an in depth tech piece on the build in several issues of Hot Bike in the coming months followed by a full bike feature. I can’t wait to see my brother’s face on October 20, at the Hard Rock Roadhouse at Biketoberfest, he will be amazed. The bike is flying together.

–Johnny

JUDGE AGREES TO HEAR MOTION IN BILLY LANE CASE– VIERA – A Brevard County circuit judge Wednesday agreed to hear a defense motion to retest blood samples taken from motorcycle builder Billy Lane, but she did not schedule a date for the hearing, attorneys said.

Officials said Judge Meryl Allawas also will schedule a hearing on the state’s motion to access Lane’s medical records in its quest to convict Lane on one count of DUI manslaughter.

Police say Lane, 37, had a blood-alcohol level of 0.19 – more than twice the legal limit – when while driving his Dodge Ram pickup he crossed a double yellow line on State Road A1A to pass several vehicles and struck 56-year-old Sebastian Inlet park ranger Gerald Morelock’s Yamaha mini-motorcycle head-on.

Lane faces up to 15 years in prison if convicted in connection with the Sept. 4, 2006, incident. His trial is expected to begin in early 2008.

Lane attorney Gregory Eisenmenger recently filed a motion asking Allawas to throw out Lane’s blood alcohol results on the basis that a failure by police to refrigerate the samples may have led to contamination that created a false high alcohol level.

Eisenmenger also asked that his own toxicologist be allowed to retest the samples. Prosecutors objected Wednesday to the blood being sent to a Colorado lab rather than a local one.

Lane’s next court date is a Nov. 6 docket sounding.

–BY KEYONNA SUMMERS
FLORIDA TODAY

RENEGADE FROM BIKERNET OFFERS GAMBLING LESSONS–It was little Johnny’s first day in a new school, so his father looked up the teacher. He told her that little Johnny was a good kid but that he was an avid gambler. He warned her that little Johnny might win lunch money from the other kids if he was not watched closely.

The teacher did not seem disturbed, assured the father that she had handled many such problems and was very capable of taking care of little Johnny’s urge to gamble.

Shortly after lunch, the father called the teacher and asked her how things were going.

“Oh, everything is going very well.” She said. “I think I may have cured little Johnny of his gambling habit.”

The father asked her what had happened.

“The little tyke absolutely insisted on betting me ten dollars that I had a mole on my rear.” She said. “I finally agreed to the bet and took him to the teacher’s lounge to show him that I had no mole.”

“Damn!” The father said. “He bet me fifty dollars this morning that he would see the teacher’s ass before the day was over.”

–from Rik Savenko

NEW SHOP OPENING IN HAWAII–Bandit and Layla going to investigate.Deacon has been in business since 1996 in Hawaii, been fixing and building bikes for 35 years. There will be live music , food, burn out contest, ride in contest, hand made trophy’s from case iron UL flatheads, prizes and more…

“I may be riding a bike from Cycle City and testing Island roads on the weekend of the 20th,” said Bandit.

BIKERNET PHOTO ART EXHIBIT OPENS–Gimme three steps gimme three steps mister~ Lynyrd Skynyrd

Live it up,
–Whiplash Biker Photog
whiplash@photo.net

SAN FRANCISCO TO HOUSTON OR BUST RUN–Here’s the pic of my buddy when he started his journey in San Francisco. He called me last night and said he has had to fix the throttle, rear axle, and he lost his shifter. Also, he said it leaks a lot of oil.

Will get more to you later.

This will be an amazing story. While Johnny is working on the Sucker Punch Sally for his veteran brother, a friend bought this bike through e-bay in Houston, jumped on a plane to Asphalt Death Customs in San Francisco and straddled this bike for the ride home. We’ll bring you a full run report next week, if he survives.

–Johnny

PUERTO RICO PASSES STRICT BIKE LAWS–Where can you find the strictest government regulations on motorcyclists in the United States? Not in any of the 50 states, but in the U.S. territory of Puerto Rico.

A measure recently signed into law by the governor of Puerto Rico will require riders to wear not only a helmet, but also gloves, boots, and long pants. After dark, riders must wear a reflective vest, and the law also tightens age restrictions on riders and imposes new testing requirements.

In some ways, the law is even more restrictive than the requirements on many U.S. military bases.Legislative sponsors said the law was a response to increasing numbers of motorcycle fatalities on the Caribbean island.

Between 2000 and 2005, the number of motorcycles and scooters registered in Puerto Rico more than doubled. Several factors encourage motorcycle use, including the year-round riding weather and the congestion of nearly 4 million residents on a 3,500-square-mile island. In general, gasoline is slightly more expensive than in the 50 states, while average household incomes are lower than in any of the states. In that environment, sales of inexpensive Chinese-built scooters have boomed in recent years as more residents in the crowded San Juan metropolitan area turned to them for affordable and fun transportation, in addition to steady sales of full-size motorcycles.

“This considerable increase in the purchase and use of motorcycles as an alternative means of transportation has brought with it an unprecedented increase in motorcycle accidents, and, at the same time, a dramatic increase in deaths from those accidents,” the legislation states.The new requirements include:
Puerto Rico already required helmet use, but the new law also requires gloves, boots that cover the ankles, and long pants. Between 6 p.m. and 6 a.m., riders and passengers must wear a reflective vest.
Riders must be 18 years of age, and passengers must be at least 12.
New riders must pass a test on the first try to obtain a motorcycle endorsement. If they do not pass, they have to take a government-approved training course.
The law adds motorcyclists to the list of school bus drivers, truck drivers, and heavy equipment operators who are subject to a legal blood-alcohol limit of 0.02 percent, instead of the 0.08 percent limit applied to car drivers.
The law specifically prohibits lane-sharing, an accepted practice in Puerto Rico that can easily cut in half the time of a rush-hour commute in the San Juan area.
The law imposes an additional $10 charge for taking the motorcycle endorsement test and an additional $10 charge for renewing an annual motorcycle registration.

The law takes effect in October. It calls for the creation of eight training centers around the island to license new riders and budgets $250,000 to start the program. But it’s not likely the centers will be running by the time the law takes effect.

Owners of currently registered motorcycles are allowed to continue riding, but will have to comply with the new licensing requirements when they renew their drivers licenses.The law essentially moves Puerto Rico from having less stringent regulations than most states to having more restrictive requirements than any of the 50 states. Previously, motorcyclists in Puerto Rico were not required to pass a riding test and get a motorcycle endorsement unless they wanted to use the island’s toll highways.

— American Motorcyclist Association

–from Rogue

BE A BIKER IN TAMPA BAY–This is a great weekend to be a biker in the Greater Tampa Bay Area! There are so many events to choose from it will have your head spinning.

At the end of this e-mail there will be a list of all the great events and happenings this weekend.Ride safe, be smart and enjoy. Don’t forget to check out the FLORIDA FULL THROTTLE HOME PAGEwww.fullthrottleusa.com/florida

OCTOBER 12-14 – BROOKSVILLE – 27TH SPOOKS N SCOOTS – VOTED #1 BIKER EVENT IN FLORIDA – Sponsored by the Hillsborough County Chapter, ABATE OF FLORIDA, INC. This event is held at the Sertoma Youth Ranch, 85 Myers Rd. Brooksville, Fl 34602. There will be vendors, games, live bands, 50/50, children’s activities, food, drinks, and of course a beauty contest. There is a memorial run for brothers and sisters lost that leaves the campground at 10am on Sunday morning. Weekend Admission (includes camping) available Friday through Sunday, $25. $20 for ABATE members. All motorcycles welcome. No guns, fireworks, attitudes or pets. For more information contact Richard at 813-626-0589 or e-mail patti.winter@gte.net VENDORS contact James at 813-763-2127 (limited spaces available) www.abateflorida.com/hillsborough

OCT 13 – ST. PETERSBURG – ST. PETE BIKE FEST – 10am-6pm, at the St Petersburg Pier, www.stpete-pier.com, Presented by Florida Gulf Coast H.O.G. and Jim’s H-D. This is going to be the BIG ONE. Live band, Safari Hunt (like a poker run but better) with cash prizes. Many vendors, Bike Show, children’s activities, Poker Walk at Pier merchants, games, restaurants with full liquor bars & beer. Best of ALL, a drawing for a Brand New 2008 Harley-Davidson – tickets only $2 each only 10,000 tickets will be sold. We are taking up the ENTIRE St Petersburg Pier and the road leading up to it, vendors & sponsors wanted, info call Jim’ H-D 727-527-9672, e-mail info@bikerexpo.com , web site www.flgchog.com

OCT 12 – NEW PORT RICHEY – PRE-BIKE FEST PARTY AND BIKINI CONTEST – Event: Pre-Bike Fest Party Downtown New Port Richey Time: 6:00 pm till Close Site: The Karl Reef Phone: 727-848-7838 Address: 6307 Grand Blvd, New Port Richey, FL 34652 Sponsored by The Law Office of Nicholas Athanason, Budweiser and Jack Daniels. Join us as we kick-off the Cotee River Bike Fest early. We will have drink specials all four days Oct 11-14. Full Throttle will be on hand Friday as we present the Hottest Bikini Contest every to hit Pasco County!!!! Hours will be Thursday 6pm till close, Friday 6pm till close. Sat 11am till close, Sun 11am till close. Downtown New Port Richey’s party spot. Great Food and Giveaways all four days. See ad in Oct issue of Full Throttle Magazine.OCT. 13 & 14 – 7TH ANNIVERSARY PARTY – Harley-Davidson of Crystal River’s 7th Anniversary Party. Food, vendors, raffles, give aways, 50/50, event t-shirts, live music and Elvis will be in the building! Call 352-563-9900 for complete details.

OCT 13 – 14 – 3RD ANNUAL COTEE RIVER BIKE BASH – 3rd Annual Cotee River Bike Fest Sponsored by Harley-Davidson of Tampa, Brandon, New Port Richey Held at 5443 Main Street in New Port Richey beginning at 9:00 am. Events include a Full Throttle Ride in bike shows (Judged by Reverand Jim), a riders skill show, a sheriff escorted ride, vendors and music. All bikes welcome. Come out and see THE MARSHALL TUCKER BAND FOR FREE. For more information call 727-810-0839, click here to send e-mail click here to send e-mail, or go to http://www.coteeriverbikefest.com.

OCTOBER 14 – 2ND ANNUAL SHERIFF’S CHARITIES RIDE – This is a 50 mile, sheriff-escorted ride starting at Gulf Coast Harley-Davidson and ending at the Cotee River Bike Fest in Downtown New Port Richey. Food, Music door and raffle prizes. Registration is at Gulf Coast H-D on S.R. 54 at 9am till 12 noon with kickstands up at noon. This is a rain or shine event. The cost of this event is $25 per rider and $15 for passengers, this includes a t-shirt, collectible pin and access to the Cotee River Bike Fest with VIP Parking. For more info check out www.coteeriverbikefest.com or call 727-243-3979

OCT 12 – 14 – WEST COAST BIKE RALLY – For more information check out http://www.westcoastbikerally.com/

–Tony Cianci
Editor – Florida Full Throttle Magazine
tonyc@fullthrottle.com

W8LESS ROTORS ON THE MARKET– “Three W8Less Rotors arrived arrived yesterday (8th), to be delivered to Sonny later this month,” said Ray Wheeler, national sales manager. ” Your three should arrive momentarily?”

They did with matching pads. These rotors are light as a feather and will rock the industry, if they keep ’em coming

AUSSIE MOTOJOURNALIST SURVIVES MELBOURNE MOTORCYCLE EXPO–I’m just recovering from the Melbourne Motorcycle Expo held last weekend. It’s a tough job but . . .

–Doc

MORE EVENTS AROUND FLORIDA KICK OFF BIKETOBERFEST–Stephen Miller Biker & Blues Bash at Space Coast H-D in Palm Bay.About the Blues Bash 12 hours of non-stop music Non-Stop Music, all weekend long, is the goal of this years Stephen Miller Memorial Biker & Blues Bash. The festivities will kick off with a VIP Sponsor Cocktail Party, Thursday, October 11th from 7 PM to 11 PM at the Crowne Plaza , on the beach in Indialantic. Hors d’oeuvres, beer, wine and a musical evening featuring the regional IBC Competitors of 2006, Ernie Southern and The Mills Brothers Blues Band to delight the crowd. There will be a music memorabilia silent auction, raffles, door prizes and more fun awaiting our music fans.

Friday, October 12th will feature “The Best Blues Bars in Brevard”, revelers will have an evening to check out the great live music scene in Brevard County, So far on board are The Beach Shack, Earls Hide a Way, and The Sebastian Beach Inn, they will all feature top notch bands for the evening, drink specials and fun.

Saturday, October 13th is the main event, The Stephen Miller Memorial Biker & Blues Bash from 11 AM to 11 PM. The event will feature a $100 Best Hand poker run. Registration for the Poker Run begins at 9:00 am. The run begins at Pineda Harley – Davidson on US 1, just north of the Pineda Causeway.

–Rogue

NEW FROM NASH MOTORCYCLES–“Thought I would shoot you over a few pics of the bike we just finished!” Said Marlin, the boss.

You should see a feature on Bikernet shortly.

–Nash Motorcycle Company
nashmotorcycleco@yahoo.com>

MISS MISERY LOOKING FOR A HOME–Well I don’t know about that, but the Bayou City Burnout CD is! No really,last week was a test message for this week. OK and another picture of MissMisery sending her stuff to Skindeep in the UK. She was just featured inSavage, I never got a reply from Iron Horse would love to get her inanother/more US magazines as well, don’t suppose you know anybody in thebike/biker/tattoo magazine industry?

–RFR

BANDIT’S GOT A RACING JONES– What does a guy do when the first time out on the Bonneville Salt Flats he wins a world record? If you’re Bandit you build a bigger, faster bike and go again. Click here for the vidcast interview at Bikernet TV.

Bandit studied aerodynamics and built a partial streamliner for his run at the 2007 BUB Meet. His goal was the title of the World’ Fastest Harley-Davidson Panhead. We get the 411 on his pilot, Valerie Thompson, and what it took to get to Bonneville. Produced by Horsepower Marketing

JIMS BIKERNET TOOL OF THE WEEK–Compression Release Valve ToolGuide Fixture For Drilling Compression ReleaseUse this tool for machining all Twin Cam heads 1999 & later, for preparingheads to install JIMS 727K compression release valves.

Install on the frontor rear head, with or without the valves installed. Simply drill, spot face,tap & install compression release valves No.727K.No.1169 – Use on all Twin Cam A or B models.
Suggested Retail Price $300.05

–JT Lepien
www.jimsusa.com

Continued On Page 4

BIKERNET LATE THURSDAY NEWS–ART FROM NEW-LINE ENGRAVING, THE ABBA KOGAN COLLECTION, PEAK AT KEINOS NEW BIKE, NETHERLANDS BIG TWIN BIKE SHOW, NEW PARTS COMING FROM KIRK PETTRY, CYCLE VISIONS POKER RUN, CYCLE SOURCE YEAR IN REVIEW, COOL-BREAKER IN JAPAN, S&S ANNIVERSARY BUILDER LIST AND WATCH OUT AT BIKETOBERFEST.

Continued From Page 1

Click to see morefrom Lucky Devil

BIKERNET ART MUSEUM OPEN–Here’s my artistic contribution for the week; a tribute to all that is good and righteous in this rotten world, courtesy of Andrew Williams…

–Z
znoevo@comcast.net

WATCH THE LOCAL COPS DON’T STEAL YOUR BIKE WHILE AT BIKETOBERFEST–I went to Daytona Biketoberfest in October of ’06 and let me tell anyone who is thinking of going ….WATCH THE COPS DON’T TRY TO STEAL YOUR BIKE, ESPECIALLY IF YOU ARE FROM OUT OF STATE OR FROM CANADA. If you have a custom ride make sure you take all the receipts for the work you have had done on your bike, any modification or removal of your vin or anti theft numbers on various parts of your bike could be deemed as contraband under Florida law and the cops will take your bike.

Like me I went down to have the time of my life and ended up being the vacation from hell. The first day in Daytona my bike (’89 Fxr Lowrider) was seized by the Volusia county sheriffs and the Florida Hi-Way Patrol (my triple tree was aftermarket and had no anti theft number). They were not very co-operative with me and had my bike for approximately 6 months claiming that it contained contraband parts, yet under the state statue they had 5 days to notify me by registered mail of their intent to seize….they did not.

They broke their own law by not notifying me and yet still almost 70 days later I was still in the dark as to why they had my bike. I contacted a lawyer in Tallahassee his name was John Minnick and after telling him what I was going through he was able to assist me in the return of my ride. Several different attorneys told me that if I had surrendered title of my bike, (meaning I did not fight for my bike) they under Florida law had the right to title it as state property and sell it at an auction. If you want to hear more contact me at my email address jwp19@hotmail.com….REMEMBER WATCH THOSE COPS THEY WILL TRY TO STEAL YOUR BIKE!!!!!!

–Rogue

WIFE OF DEMOCRATIC PRESIDENTIAL CANDIDATE HITS MOTORCYCLIST–Michelle Obama, wife of Democratic presidential candidate Barack Obama, was involved in a traffic accident Tuesday as she rode to a rally in northern Iowa, organizers said. She was not injured.

The Illinois senator’s wife was among five people in a van that was hit by a motorcycle as the van attempted a left turn just south of Hampton, where she was to speak at a rally, said Tommy Vietor, Obama’s Iowa press secretary. The motorcyclist, whose name has not been released, was injured and a medical helicopter was at the scene. Michelle Obama later told the crowd in Hampton that the rally

–Rogue

Note how they worded this piece. The van made a left in front of the biker, but he “hit” her. Wait a minute. We will investigate further.–Renegade

S&S ANNOUNCES 50th ANNIVERSARY BUILDER AND SPONSOR LIST– LA CROSSE, WI (October 09, 2007) S&S? Cycle Inc. is proud to announce the names of the builders participating in the S&S 50th Anniversary Bike Build.

On June 26-29, 2008 motorcycle industry history will be made as 50 of the best-known custom bike builders in the world come together in La Crosse Wisconsin, to support the S&S 50th Anniversary celebration. And while they will be there to support S&S, every builder has plans to with the $50,000 Grand Prize by taking first place in the bike show.

“When I think back to 1979 when I joined the business who would have thought that we would have 50 builders from all around the world building motorcycles to participate in a competition celebrating our 50th,” said S&S Chairman of the Board, George Smith.”We’ve worked hard to make good parts for an industry that has been very good to us and we would like to thank all our customers that have supported S&S all of these years.”

Judging will be done by the builders themselves, key media members, S&S personnel, show attendees and internet voters.

Each engine category winner will receive the cost of their engine back and the People’s Choice winner gets a brand new X-Wedge engine.

The engines used in this historic event will be serial numbers from 1958 to 2008 as a tribute to the 50 years of S&S and represent the only anniversary engines built for the S&S 50th. The 51st engine, serial number 2008 will be used in a special S&S project to be revealed later.

The builders and future owners of these engines/motorcycles will receive a certificate and medallion commemorating the historic pedigree of their specific serial number.

“This year’s project is very special because it involved major commitments from 50 different builders from around the world,” said S&S president, Brett Smith.”The amount of time and effort involved in making a project like this a success is extraordinary and we cannot thank those that are supporting it enough.Not only are the builders committed, but the entire La Crosse and Seven Rivers Region community, countless sponsors, and S&S employees are all working hard to ensure that this celebration is successful and fun for everyone.”

The builders will come from Australia, Belgium, Canada, England, France, Germany, Italy, Great Britain, Holland, Japan, Netherlands, New Zealand Sweden and the United States. This commitment from builders all over the world is truly a testament to the impact S&S has made on the custom motorcycle industry.

Using 10 of the S&S P-Series engines for their build will be:
Branko Built Motorcycles (Branko), Australia
Chica Motorcycle Service (Chica), Japan
Cory Ness, CA, USA
Central Coast Cycles (Scott Long), CA, USA
David Anthony Customs (David Anthony), CA, USA
Departure Bike Works (Lee Clemmons), VA, USA
Hogtech (Pedar Johanssen), Sweden
Indian Larry Legacy (Paul Cox), NY,USA
Krugger Motorcycles (Freddie Krugger), Belgium
Violator Motorcycles (Piet Hoffman), Netherlands

Using 10 of the S&S SH-Series engines for their build will be:
Bling’s Cycles (Bill Dodge), NJ, USA
Cook Custom Choppers (Dave Cook), WI, USA
Covington’s Cycle City (Jerry Covington), OK, USA
Chris Olson Customs (Chris Olson), WA, USA
Church of Choppers (Jeff Wright), IA, USA
Donnie Smith, MN, USA
Hot Dock (Kieji Kawakita), Japan

Specialty Parts Supply (Erick Martens), Holland
Sucker Punch Sally (Donnie Loos), OH, USA
Zach Ness, CA, USA

Using 8 of the S&S SB-Series engines for their build will be:
Ace Caf? London (Nick Gale), England
Engineering and More (Joel Domergue), France
Jesse Rooke, CA, USA
Krazy Horse Customs (Paul Beamish), Great Britain
Odyssey Motorcycles, (Bertrand Dubet) France
Michael Prugh Design (Michael Prugh), SD, USA
Redneck Engineering (Vince Doll), NC, USA
Skeeter Todd, NY, USA

Using 6 of the S&S V-Series engines for their build will be:
Arlen Ness, CA, USA
Great American Choppers (Darrian Tefft), MI, USA
KC Creations (Kim Suter), KS, USA
Nicolas Chauvin, France
Paramount Custom Cycles (Aaron Greene), NV, USA
Revolution Speed (Mike Kamalian), GA, USA

Using 6 of the S&S T-Series engines for their build will be:
Bennett’s Performance (Eric Bennett), CA, USA
Dan Roche, Canada
G-Squared Racing (Derek Churchwell), GA, USA
Kendall Johnson Customs (Zach Johnson), NC, USA
Klock Werks (Brian Klock), SD, USA
Strokers Dallas (Rick Fairless), TX, USA

Using 10 of the S&S X-Wedge engines in their build will be:
AQG Motociclette (Aldo Querio Gianetto), Italy
Big Bear Choppers (Kevin Alsop), CA, USA
Bourget’s Bike Works (Roger Bourget), AZ, USA
Dougz (Doug Wozney), WI, USA
Fred Kodlin Murdercycles (Fred Kodlin), Germany
Jim Nasi, AZ, USA
Kiwi Indian (Mike Tomas), CA, USA
Orange County Choppers (Paul Sr., Paul Jr.), NJ, USA
Road Rage Customs (Ray Pratt), New Zealand
Walz Hardcore Cycles (Marcus Walz), Germany

To help the builders along on this project many members of the motorcycle industry wanted to pitch in and offer discounts or provide parts at no charge; Baker, Chopper Guys, Daytec, Frame Lock, Independent Cycle, JayBrake, Metzeler, Mobil 1, Ness, Paughco, Performance Machine, Pingel, Primo Belt Drives, Rolling Thunder, S&S Cycle and Works Performance. We thank them for their support.

With a field this huge, along with the La Crosse area is jumping in to host a three day festival to support the event, the S&S 50th Anniversary Celebration is a do not miss weekend. More information, a schedule of events and hotel and campground information can be found at www.sscycle50th.com and additional information about the area can be found at www.explorelacrosse.com .

COOL-BREAKER CELEBRATES 10TH ANNIVERSARY COOL-BREAKER– the premier custom motorcycle event in Japan, will make its 10th anniversary when it takes place over the weekend of 13-14 October.

The annual event in Yokohama, promoted by Keiji Kawakita of Hot-Dock Custom Cycles, who placed 3rd at the 2007 World Championship of Custom Bike Building in Sturgis, will feature 100 professional builders and 250 custom Harley-Davidson bikes competing in the All-Japanese Championship of Custom Bike Building, which is an affiliate of the World Championship.

The quality of the bikes which enter can be gauged by the fact that seven builders who exhibited at the 2006 Cool-Breaker show then went on to travel to Sturgis in 2007 for the World Championship, and all placed well, including the show’s winner Kenji Nagai of Ken’s Factory.

In addition, there will also be the Best of Builders Award supported by S&S and a ride-in show contest.

Such is the strength of the custom scene in Japan and the standing of this show that US businesses S&S, Arlen Ness, Jammer, Custom Chrome, DNA Specialty and W&W from Germany will all have a trade presence.

www.cool-breaker.jp

CYCLE SOURCE HOTTEST COMSUMER MAG IN INDUSTRY YEAR IN REVIEW–Each year Cycle Source Magazine does a “Year In Review” Special Edition for January. Last year you might remember we selected Keith R. Ball as motorcycling’s Man of the Year for the 10 years he had put into Bikernet.com, along with “Best Of” awards in other categories. Well this year we’ve decided not to keep it all to ourselves and have launched an online survey to get your opinions for what you, the reader, feels was the “Best Of” in 2007.

Just visit www.cyclesource.com and follow the link for the Year In Review Survey. This is our annual mark on motorcycle history; be a part of it!

So far, some of our early nominations are:

Motorcycling’s Man Of The Year:
Jeff Cochran
Sucker Punch Sallys – For All The Work He And His Wife Have Done In Support Of Our Troops.

Bean’re
Motorcycling’s ambassador– By his lifestyle alone Bean’re exemplifies what it means to be a true original. He is one of a kind and honestly an individual. You’ll never see Bean’re when he’s in a bad mood or not willing to spend some time rapping to people.

Motorcycling’s Woman Of The Year:
Marjorie, Shadow, Kleiman
She rides, she gets it and she participates on the same fundamental level that most of us do. Marge has great wisdom in her offerings and is as in touch with this scene from a journalists stand point as anyone going today.

Best New Product Of The Year:
S&S Cycle’s X-Wedge
This product was the only truly unique offering to the American V-Twin industry this year. On top of that, it marked a turning point for the whole aftermarket V-twin industry in its struggles with the EPA.

Baker’s Softail Primary
First wet primary drive system from the aftermarket.

Harley-Davidson’s 2007 110-inch Motor
The smoothness of the engine compared with the horsepower gives you high performance that doesn’t have the same characteristics as most other high-pro engines we’ve ridden.

Feuling’s oil cooler/ oil filter
A must have for high milers. On top of the additional cooling and filtering features, this product allows for an additional full quart of oil to be added to the system.

Best Event Of The Year:
Shady Mayhem
Simple, easy going, and a ton of fun.
The Gypsy Tour
Like taking a step back in time. Just some cats havin’ a blast doing what they loved.

Best Builder Of The Year:
Pat Patterson
Led Sled Customs A master fabricator by nature, Pat has also set a pace for the industry this year by fabbing parts that are for stock modification. That is, providing parts to the aftermarket that are intended for altering stock chassis. In these trying economic times and with the next generation coming in, this has been a big movement in the parts business and we believe Pat is ahead of the curve in that regard. Also for his vision, his natural ability to look at things like a truck hood and see how it could be made into a gas tank for a bike. He keeps Led Sleds small scale, not commercialized, not industrialized.

Bill Dodge
Blings Cycles – Every bike we’ve seen of Bill’s this year has been way off the hook. He has cornered the market on the flat track/ dual sport styling that has come into the American motorcycle scene in 2007.

Scott Webster & Big Brian
Leroy Thompson Choppers – The LTC duo took it to ’em on the real side during the Discovery Biker Build Off. The level of hand customizing that they put into their entry, “Ethyl” was unparalleled.

Best Factory Manufactured Bike Of 2007:
The 2008 Harley-Davidson Nightster
Since this bike was a Mid-year release we decided to include it in the 2007 line-up. The Nightster was a real bench mark for Harley-Davidson and the industry.

Best Production Custom Of 2007:
Saxon’s Mad Jack
Designed By Gard Hollinger, this bike exemplifies the cross culture that the next generation is bringing into the American motorcycle scene today.

Sucker Punch Sally’s Traditional Bobber
With 60’s retro styling and a good price point we think SPS hit it right on the head with this bike. Appealing to a younger demographic by design and economics, this was the bike everyone was waiting for this year.

These are just a few of the nominations from our latest production meeting in the office but we want to hear from the general public. The survey only takes a few minutes and everyone is welcome. We’re also voting on the best bikes from Cycle Source in 2007 and all of the nominations can be viewed on the site as well.

CYCLE VISIONS POKER RUN TO BENEFIT CHILDREN’S HOSPITAL–Come join us on our Poker run to benefit Children’s Hospital!

Please pass this on to everyone you know.If you can help with a donation, all the kids will benefit right here in San Diego.

Thank-you again for all your support!

–Hilary & Randy

BIKERNET ON POLICE RELATIONS–Working people frequently ask us retired guys what we do to make our days interesting. Well the other day, for example, I went downtown and walked into a camera store. I was only in there for about 5 minutes and when I came out there was a cop writing out a parking ticket.

I said to him, “Come on, man, how about giving a retired union man a break?” He ignored me and continued writing the ticket.

I called him a “Nazi.” He glared at me and wrote another ticket for having worn tires.

So I called him a “doughnut eating Gestapo.” He finished the second ticket and put it on the windshield with the first.Then he wrote a third ticket. This went on for about 20 minutes. The more I abused him the more tickets he wrote.

Personally, I didn’t care. I came downtown on the bus, and the car that he was putting the tickets on had a bumper sticker that said “W 04.”

I try to have a little fun each day now that I’m retired. It’s important to my health.

–N.R.

NEW PARTS COMING TO BIKERNET–Just want you to know I haven’t forgotten about you. I appreciate you calling me back last week and look forward to getting with you on my parts for show on Bikernet, and just in general making another friend thru Larry. He and I have never met, least not yet, but I feel like we have known one another for years. Same goes true for Clean Dean, can’t wait to meet him either, now I’m adding you and Berry to that list.

I have been waiting on the primo pulley form Berry so I could cut yours and his at the same time, well being honest so my jobber could cut them in the same run. Well I got it today, I’ve already designed the primo unit and the files hopefully go on the table to get cut tomorrow. You should be seeing yours within about a week, I am still trying to get some press release stuff together on my parts to send on a cd at the same time.

I just can’t wait till you get the pulley lock-down device, actually, just to see what you say.

BTW Check these pics out, I think this may be your speed. These showed up courtesy of Clean Dean last year in Biker. It’s the hotrod I spoke of that is for sale. And yeh I ride it, hard, frequently like nearly daily.

–Kirk W. Pettry
Kirk?s Customs
Cell: 434-426-7530
Web: www.kirkscustoms.com
E-mail: kirk@kirkscustoms.com

BLUE ANGELS FLY BY OVER SAN FRANCISCO– WFO Blue Angels in ‘Frisco last Sunday at the Fleet week show.

–Paul Dispensa
pdispensa@lirb.org>

PRIZE DETAIL FOR THE ZODIAC SPONSORED NETHERLANDS BIGTWIN CUSTOM BIKE SHOW–Being staged at the Autotron, Rosmalen, Netherlands, from Friday November 9th through Sunday 11th, Bigtwin Magazine, organizers of the Bigtwin Bike Show & Expo (formerly known as MotorSale) have released details of the prize fund for the Zodiac sponsored custom bike show being staged at the event that weekend.

Zodiac is putting up cash prizes for each class, with 750 Euro to the class winners, 500 Euro for second places, and 250 Euro for third places.

Snap-on Tools and British brakes manufacturer Harrison Billet is also making prize awards.

The class details and all other show information, including full entry rules, can be found in the multi-lingual event website.

New for this year though, the Bigtwin Bike Show is now an Affiliate event to AMD’s Official World Championship of Custom Bike Building, and the organizers will be awarding a 5,000 Euro contribution towards expenses for the Best In Show winner to compete at the 5th annual Official World Championship at Sturgis in August 2008.

Always one of Europe’s most respected custom bike shows, and most popular custom bike events, the Bigtwin Bike Show & Expo is unique. It combines a public attendance of up to 15,000 enthusiasts each year with the Zodiac International Dealer Show featuring great vendors from all around Europe and the USA.

Zodiac has generously supported the Bigtwin Bike Show, an event now headed into its 16th year, for many years, helping Bigtwin Magazine build the event into one of Europe’s most prestigious custom shows. The AMD and World Championship organizing team is now very proud to be able to have added the Bigtwin Bike Show to the growing list of worldwide events that are such an important part of the World Championship program.

As with most of the World Championship Affiliate custom bike shows, the Zodiac sponsored Bigtwin Bike Show is an ‘open’ and ‘ride-in’ event – all the motorcycles entered must be capable of being ridden in order to collect prizes, and entry is open to industry professionals as well as private/consumer builders.

BIGTWIN BIKE SHOW & EXPO
www.bigtwinbikeshow.nl

BIKERNET.COM SOON TO FEATURE KEINO’S LATEST CREATION–this is the new Keino’s bike. I’ll send the other pics soon.

–Ela

RM AUCTIONS IN ASSOCIATION WITH SOTHEBY’S PRESENTS THE ABBA KOGAN COLLECTION– RM Auctions presenting an unparalleled line-up at its inaugural London sale to be held at Battersea Park, October 31, 2007, London, England – Three collections highlighting the best of European Automobiles

London, England (September 21, 2007) – RM Auctions cofounder Mike Fairbairn is happy. “We are going to showcase a fabulous line-up of cars”. In addition to the collections from English Formula 1 mogul Bernie Ecclestone and Italian businessman Giuseppe Prevosti RM is featuring the cars of Abraham “Abba” Kogan in it’s inaugural London sale to be held at Battersea Park on October 31st. “Our second European auction after our legendary start in Maranello in May will establish us in the center of European classic car business”, confirms Fairbairn.

Kogan’s collection is centered around some of the most fascinating engineering masterpieces of the motorsports world, from the headlining Delage 15-S-8 that was one of the four twin supercharged factory team cars that swept Grand Prix racing in the 1927 season, to a selection of fascinating sports cars, including the Cisitalia 202 SMM that won its class championship six years running, and the OSCA 2000S – the fastest and prettiest OSCA of all and one of just five examples built.

The 1936 Delage, a 3 litre D6 was raced not only in its early days with an enviable record of success, but remained on the race track 1951, competing in 1949 in the 24 Hours of LeMans as a 13 year old car. With a continuous history from new, this remarkable Delage offers a provenance otherwise nearly impossible to find.

For most of his life, Abba Kogan has been fascinated by cars, and driven to collect, restore, drive, and enjoy them. He is drawn to machines that exhibit innovation in both engineering and beauty – but always within the context of their time: what is now conventional was once revolutionary. It is the search for such cars that has been the driving force behind the Kogan Collection, the philosophy that connects a Ferrari 288 GTO with a Grand Prix Delage race car – or an OSCA 2000 with a Renault RE30 F1 car.

ON BIKERNET.COM RIGHT NOW–I sent the photos and text about the new Walz Hard Core motorcycle and Ferrari. This special project is until now unseen combination of a radical hardcore custom bike and a matching ferrari f 430.

All photos shoot are courtesy from Walz Hard Core Cycles. Check the feature on the home page right now

Ciao

–Ela

NEW ART FROM HEATHER NEW OF NEW-LINE–Here’s a few pictures…I hope you like it!I will mail more close ups too.

–Heather

Continued On Page 3

BIKERNET WHACKY THURSDAY NEWS – CUSTOM CYCLE ENGINEERING RETROFIT KIT, MRF CALL TO ACTION, JUG HUGGERS FROM METRIC THUNDER, RIVERA PRIMO SLIM LINE BELT DRIVES, BAGGER NATION COMES ALIVE, D&D SHARPEST SOFTAIL CONTEST FINAL WEEK, NEW BOOK FROM WOLFGANG PUBLICATION, NEW WHEELS FROM STREETWALKER AND BRASS BALLS BOBBERS TATTOO BIKE.

Hey,

I need some input. Sin Wu keeps complaining about my non-stop reflections on the industry and the projects in our lives. “It’s too harried,” she stammered while I tried to talk her out of her clothes. “You’ve got too much going. You need to relax.”

Sure we have a project or 15 and a deadline or several, but I’m kicking back. It’s the nature of our lives and the industry. At least I sense a constant buzz. There’s more events, action, bikes, products, and dealers than ever before. How the hell can anyone keep up? Whatta you tink? Drop me a line: Bandit@bikernet.com. I know, you don’t have time.

Let’s hit the news:

BANDIT GETS THE 411 ON BRASS BALLS AUCTION TATTOO BIKE

“I need for you to find out what Dar Holdsworth at Brass Balls Bobbers is doing with the Wounded Warrior Project and the company’s RAD tattoo motorbike on eBay,” barked Bandit.

“Ok, Ok, and a good morning to you, I said.”

You see, Bandit loves all things Bobber and he loves that one-of-a-kind Tattoo Bobber with the killer Indian engine. It was built on Speed’s V-Twin TV show and he is excited that it is coming available on eBay today.

I scooted over to www.brassballsbobbers.com and dialed 405.285.0808. While the phone was ringing I notice that on their website the baseline custom bobber starts at just $16,995, not bad!

Anyway, I got a hold of Dar, Master Motorcycle Designer and Brass Balls Bobbers Head Honcho, and he explained that the tattoo bike is a one-off custom bobber motorcycle that he and partner Sam Wills designed. “It’s low, fast and completely sano. It’s got everything you need and absolutely nothing that you don’t.” (I pulled together the details here.)

So I pressed him, “There’s a rumor that you are selling it?”

“Well, it wins awards wherever it goes and is our flagship bobber at Brass Balls Bobbers. We have over $55,000 in this baby and anything north of $35,000 would make us happy.

Damned, this is one special motorbike and a guy just might be able to get a steal of a deal. Dar went on to explain that a portion of the proceeds goes to the Wounded Warrior Project. In addition, the auction starts on October 10 and interested bikers should check www.brassballsbobbers.com for the eBay link.



BIKERNET FAMILY COUNSELING– “An extraordinarily handsome man decided he had theresponsibility to marry the perfect woman so they could produce beautiful children beyond compare.

With that as his mission he began to search for the perfect woman.

Shortly there after he met a man who had three stunning, gorgeous daughters that positively took his breath away. So he explained his mission to the man and asked for permission to marry one of them.

The man simply replied, “They’re lookin’ to get married,so you came to the right place. Look ’em over and pick the one you want.”

The man dated the first daughter.The next day the father asked for the man’s opinion.

“Well,” said the man, “she’s just a weeeeee bit, not that you can hardly notice…pigeon-toed.”

The father nodded and suggested the man date one of the other girls; so the man went out with the second daughter.

The next day, the father again asked how things went.

“Well,” the man replied, “she’s just a weeeee bit, not that you can hardly tell…cross-eyed.”

The father nodded and suggested he date the third girlto see if things might be better So he did.

The next morning the man rushed in exclaiming,

“She’s perfect, just perfect. She’s the one I want to marry.”

So they were wed right away. Months later the baby was born. When the man visited the nursery he was horrified: the baby was the Ugliest, most pathetic human you can imagine. He rushed to his father-in-law and asked how such a thing could happen considering the beauty of the parents.

“Well,” explained the father-in-law… “She was just a weeeee bit, not that you could hardly tell… pregnant when you met her.”

–from Rev CarlR



GLORY OLE WHEELS BY STREETWALKER–Envy Cycle Creations , manufacturer of Streetwalker Exhaust Systems, has added another new entry to their stable of Streetwalker products.

Streetwalker Glory Ole Wheels are a Hot Rod themed wheel, powdercoated a dark argent pearl coat before being CNC lathed and milled using state of the art equipment to insure superior quality. After final machine work is completed the entire wheel is then re coated with a ultra durable high gloss clear powdercoat finish, so the only cleaning you’ll ever have to do on these wheels is with a little glass cleaner and a soft rag.



Glory Ole’s are available with matching rotors and pulleys and are available in the following sizes: 21″ x 2.15″, 21″x 3.50″, 18″x 3.5″ 18″x 5.5″ and 18″x 8.5″

See more of the Glory Ole’s on www.streetwalkerexhaust.comOr call the Streetwalker’s at 602 391 8488



ADVANCED CUSTOM MOTORCYCLE ASSEMBLY AND FABRICATION BY WOLFGANG PUBLISHING–What started in the mid-’90s when a few people decided to build “stock Softails” from aftermarket parts – because they couldn’t buy one at the dealer – has evolved into a full blown industry. Today, every small town has a Chopper or Custom bike shop and every cable TV channel has a Biker-Build-Off series. No longer content to build copies of stock motorcycles, today’s builder wants a motorcycle that’s longer, lower and sexier than anything approved by a factory design team.

Wolfgang Publications and Timothy Remus were there at the very beginning of the trend with their Ultimate V-Twin Motorcycle book. Today they’re back with their new book, Advanced Custom Motorcycle Assembly & Fabrication. Part catalog, part service manual and part inspiration, this new book offers help with Planning the project, getting the right look and actually assembling that custom bike you’ve dreamed about for years.

Three start-to-finish sequences show not just how the best bikes are bolted together, but how the unique one-off gas tanks are shaped and then covered with candy brandywine paint. With 144 pages and over 400 color photos, this book from Wolfgang Publications and Tim Remus offers the help you need to build your very own custom motorcycle. ISBN: 1-929133-23-5 (with this number you can order at any bookstore)$24.95.

–Jacki Mitchell
Wolfgang Publications
PO Box 223
Stillwater, MN 55082
ORDER LINE: 651-275-0194
OFFICE: 651-275-0198
SALES: 651-275-0143
FAX: 651-439-7052
www.wolfpub.com



FIFTH ANNUAL CHOPPER’S ART SHOW TO BENEFIT DENVER BOYS AND GIRLS CLUB, TAKING PLACE AT THE CAPSULE IN DENVER, SATURDAY, OCTOBER 20TH–Denver, COLO- September 20, 2007 – Denver 81 announced today their fifth annual Chopper’s Art Show to benefit the Boys and Girls Club of Metro Denver, will take place Saturday, October 20 at a new location, the Capsule Art and Event Center, located at 560 Santa Fe Drive in Denver, Colorado. This year will focus on how tattoo design, rock-n-roll art, hot rods and motorcycle lifestyle art all influence and play off each other.

The show will feature several artists and motorcycle builders, free parking and a reception party with Alan Forbes and other guest artists, including a signing by Forbes at 8:30 pm. The Capsule will have several bikes from Pistol Pete of Front Range Choppers on display, as well as bikes by Billy Lane and Albright Bikes, and will feature an art auction with pieces from a number of different mediums.

Motorcycle lifestyle photography, art from local tattoo artists, hot rod art and album covers are some of the mediums that will be presented. Several photographs from local and national artists such as Michael Lichter, Steve Temple and Curt Lout, are being donated and will available for purchase by auction, with all of the profits benefiting The Boys and Girls Club of Metro Denver.

In addition to the art on display, live pin-striping demonstrations by Joe “Brox” will take place throughout the day. There will also be original art on display that will not be available for purchase from private collections from artists like Timothy White, Joe Richardson and Von Dutch.

“The theme of this year is how rock album art relates to tattoos and how that relates back to motorcycle design. There’s been an evolution with hot rods, rock and roll, tattoos and motorcycles to where they are all intertwined artistically. Everyone will enjoy seeing how the bikes compliment the art and vice versa,” said event coordinator, Nik.

The Fifth Annual Choppers Art Show will take place one day only, Saturday, Oct. 20. The gallery hours will be Saturday from 1 p.m. to 11 p.m. Suggested donation to the exhibit is $10.

Artists reception at 8:30 p.m.
Capsule Art and Event Center
560 Santa Fe Drive
Denver, CO 80204

For more information you can e-mail chopperartshow@gmail.com or call (303) 762-0659 and ask for Nik, or visit the website: http://www.denverhamc.com/



FINAL WEEK FOR BIKERNET SHARPEST SOFTAIL CONTEST SPONSORED BY D&D– Vote for the sharpest v-twin Softail from the Bikernet Community. Simply vote for the one that you like the best. The motorcycle that gets the most votes receives a new set of Fat Cat pipes from D&D Performance Enterprises. D&D Fat Cat Pipes are dyno tuned and depending upon your application can increase HP as much as 10 additional ponys. If you have modified your engine the Boarzilla pipes are made for you. They are larger in diameter really pump out the performance. Vote now!



BAGGER NATION COMES ALIVE–PAUL Yaffe, star of TV’s Biker Build-Off and member of the Hamsters, has launched a new website Bagger Nation.

The aim of the new Bagger Nation website is to create an online community for Bagger owners. The site already features Bagger parts from the Paul Yaffe Originals line and will in the future also carry parts from other manufacturers. Additionally, there are details of project bikes and completed bikes available for sale.

Paul’s plans for Bagger Nation for the future include a blog and a Q&A section for both riders and dealers. His stated intention is to make the site information rich, and a resource guide which constantly grows and evolves.www.baggernation.com



BIKERNET WEEKLY PRODUCT RELEASE FROM RIVERA PRIMO / 10-11-07SLIMLINE BELT DRIVE–Here’s a new, narrowed belt drive from Rivera Primo that’s turning heads everywhere.This 1-3/4″ wide, 11mm Slimline kit is designed for 1990-2006 Evo & Twin Cam Softailmodels.

Featuring the “dense pack” Kevlar polychain primary belt that’s been tested to handlehorsepower loads in excess of 150 HP, this belt drive is built around a new, one-piecemotor plate with a clean-looking snout covering the jackshaft components.

The most noteworthy feature is the full coverage carbon fiber guard which fully encasesthe pulleys and belt. The stainless diamond-looking cover crest is both decorative andfunctional?it conceals mounting for our new mid-mount shifting control.

Included in this kit is an all-new Pro-Clutch? set-up, featuring wide-slotted Kevlar frictionDiscs for maximum engagement.



Kits are on-the-shelf & ready to ship!
2016-0225 Slimline Narrowed Belt Drive Kit / Includes Front & Rear Pulleys, $ 2299.95 Motor Plate Assembly, 1-3/4″, 11mm Kevlar Polychain Belt, Pro-Clutch? Assembly & Full Carbon Fiber Outer Guard
2084-0510 Mid-Mount Billet Control Kit / Includes Brake & Shift Side Assemblies

For these & other fine products contact:
Rivera Primo
12450 Whittier Blvd. Whittier, CA 90602
Tel: 800-872-1515
Tel: 562-907-2600 Fax: 562-907-2606
www.riveraengineering.com



THREAT TO OUR FREEDOM–NTSB bulletin encouraging people to write to their state legislators to encourage helmet laws. Please take this threat very serious! It appears NHTSA has found someone to lobby for them! http://www.ntsb.gov/alerts/SA_012.pdf

For an organization that has only investigated 6 motorcycle crashes they sure are using these stretched stats to make these outrageous claims!

We all know that wearing a helmet does not mean that a person survives a 60 mph crash! How about if all car drivers wear a helmet as well since the majority of those killed in car crashes die from head trauma? If they make everyone wear a helmet then inattentive drivers don’t have to pay attention right????

A government agency that runs on my tax dollars has no business lobbying to change my state law!

Please write to your state legislators and let them know that may get false statistics thrown at them pushing for helmet laws and that you are against both a mandatory helmet law and government agencies being allowed to lobby for law changes. They should only be able to speak on behalf of their expertise which in this case the NTSB does not have in this arena

Vicki Roberts-Sanfelipo, RN/EMT
Director Accident Scene Management, Inc.
President of SOS & Conspicuity Inc.
W246 S3244 Industrial Ln. A
Waukesha, WI 53189
www.accidentscene.org
info@accidentscene.org
(877) 411-8551 – toll free
(262) 521-2880 – local
(262) 436-0286 – fax



2 into 2 JUG HUGGERS– Jug Huggers are performance pipes that have the right mix of air flow and back pressure to make for increased performance and incredible sound. The oversized removable heat shield gives the Jug Huggers a 2 1/2″ fat look. Max-Flow performance baffles and chrome billet aluminum end caps are standard.

Optional stealth baffles or torque chambers give you the option of getting the right performance from your motorcycle. Save $80!



MRF CALL TO ACTION–For the past several weeks the Motorcycle Riders Foundation (MRF) has beenactively working on a multi-tiered strategic initiative to counter theNational Transportation Safety Board (NTSB) program to pressure statesinto enacting mandatory helmet laws. We are prepared today to launch theprogram beginning with a Call to Action to our State Motorcycle RightsOrganizations (SMROs).

The MRF’s Call to Action is to encourage our SMRO partners to send theirtop lobbying teams to Washington D.C. in late October and early Novemberto visit with their members of Congress to voice opposition to the NTSB’slobbying efforts. It is our position that the NTSB is proposing todirectly lobby the states with federal tax money based on poorly-drawnconclusions, using a very narrow scope, and not employing the rigors ofresearch to which they normally hold themselves. This is simply notacceptable to the MRF and our SMRO partners. A clear message was sent bythe Senate in the 109th Congress when they voted 69-28 to defeat theLautenberg Federal Helmet amendment, which would have pressured statesinto passing mandatory helmet laws, based on the fact that this issue isclearly a State’s rights issue. Accordingly, we will be asking members ofCongress to write a letter to the NTSB reminding them of this fact.

During these SMRO visits we will also be presenting a bullet pointstatistical fact sheet developed in conjunction with the MRF Legislative,Motorcycle Safety, and Statistics Committees that clearly shows that theanswer to motorcycle safety and reducing fatalities is, in fact, anaggressive approach toward CRASH AVOIDANCE and NOT safer crashing. Inaddition, we will be educating members of Congress on the many pointscontained in our Motorcycle Safety Action Plan, pointing out to them thatstates with the highest reductions in motorcycle fatalities and stateswith low fatality rates per registered motorcycle are not those withmandatory helmet laws, but rather states that utilize the many tools inthe motorcycle safety action plan. Additionally, we will thank many ofthem for their belief in motorcycle safety shown by the creation of the2010 motorcycle safety grants and the creation of the Motorcycle AdvisoryCouncil in TEA-LU. We will take advantage of this time to inform them asto how these programs are being used effectively.

The second phase of the MRF’s strategic initiative involves the MRFholding a press conference in the first week of November in one of theoffice buildings of the United States House of Representatives inWashington, DC. The press conference will feature a prominent member ofCongress. Expect another Call to Action encouraging our members, our SMROpartners, motorcyclists in general and other concerned citizens to attend.At that time we will be issuing a formal letter to the Chairman of theNTSB asking him to reconsider their proposed lobbying of the states andasking that he consider the statistical facts related to our MotorcycleSafety Action Plan and its effectiveness with regard to Crash Avoidanceand NOT Safer Crashing as the goal.

For strategic reasons, third phase of our initiative will be announcedonce we complete the necessary research and sufficient discussions havetaken place. We will go on record, however, as stating that we will notrule out asking Congress to take action against the NTSB, as we have donewith NHTSA in the past, should they continue to ignore the spirit ofprevious congressional mandates against federal agencies lobbying stateson mandatory helmet laws.

Please contact Jeff Hennie, Vice President of Government Relations of theMotorcycle Riders Foundation, at 202-546-0983 in our Washington D.C.Office to schedule your appointments.



CUSTOM CYCLE ENGINEERING FLT/FXR SWING ARM RETROFIT KIT–Custom Cycle Engineering has developed a swing arm conversion kit that replaces the stock Cleve Bloc style swing arm bushings with spherical bearings. The conversion covers all the FLT and FXR models from 1980 to 2001. The swing arm conversion kit coincides with Harley-Davidson’s change from the Cleve Bloc bushing to a spherical bearing in all the 2002 and up FLT models.

The conversion over to spherical bearings in the early models dramatically changes the handling and tracking of all the FLT’s and FXR’s. The sticksion at the swing arm pivot is greatly reduced with the new spherical bearings. This allows for the swing arm to react quicker to any harsh road conditions keeping the wheel in contact with the road. The use of spherical bearings also helps negate any lateral and torsional movement in the swing arm by the shear dynamics of a spherical bearing.

The swing arm bearing conversion kit is a positive answer to the inherent ill handling problems of the popular Dresser models.

Note:Along with the installation of the Swing Arm Conversion Kit, Custom Cycle Engineering recommends the replacement of the old Rubber Mount Isolators with new replacements (P/N 47564-86 B).

Custom Cycle Engineering
1970 Peacock Boulevard
f Oceanside, CA 92056
Phone: 800-472-9253
f Fax: 760-941-6489



Continued On Page 2

BIKERNET END OF NEWS-NEWS – PUSSY INVADES HEADQUARTERS, TOMMY GRIMES TO MAKE NHRA, LOOKING FOR GOTH GIRL, PAUGHCO HORN COVERS, BASSANI HASSLE FREE PLUG N PLAY EFI, TRIBUTE TO RICHARD QUIGLEY FUND, SCOTT JACOBS ART, CHOPPERS FOR CHILDREN, VEGAS BABY, D&D EXHAUST SPONSORS WORLDS FASTEST PANHEAD, SCOOTER GRUBB BONNEVILLE PHOTO BOOK 2007 AND MID AMERICA MOTORCYCLE AUCTION.

Continued From Page 2

MIDAMERICA MOTORCYCLE AUCTIONS COMING–The Minnesota Motorcycle Auction is proud to present several motorcycles from private collections.

Minnesota Motorcycle Auction
October 6th, 2007 at the
Aldrich Arena, 1850 White Bear Avenue
St. Paul, Minnesota.

More details about this exciting event are available bycalling our office 651-633-9655 or visting our website www.MidAmericaAuctions.com

1908-1910 Miami Twin
Parked since the teens. First time in daylight in over 30 years. Original paint. The owner has never tried to start this rare motorcycle.

As it turns out this bike might be bogus, not American at all. We’re still checking.

SCOOTER’S BONNEVILLE 2007 PHOTO ESSAY BOOK NOW AVAILABLE–It is up and available !!! the 2007 edition of the Bonneville Salt Flats, Motorcycle Land Speed Trials by Bub photobook. Over 150 images from this years event including but not limited to the Bikernet.com/5-Ball racing, best engineered and world’s fastest Panhead and it’s pilot GoDaddy Girl Valerie Thompson, Claude Mckee’s images of the Ack Roll, Roger Goldhammer and the lovely Brenda, the Klock Wedding, the Chop n Grind boys, Belgiums Fred Krugger, Team Swiss, the Keepers of the Blue Flame, the J&P streamliner and much much more. Just follow the link

http://stores.lulu.com/store.php?fAcctID=660689 and enjoy.

I can’t tell you how much I enjoyed seeing you all on the Salt again this year and how much making this book brings it all back.

–Scooter
www.ScooterShoots.com
520-403-1578

WORLD’S FASTEST PANHEAD RUNS D&D PERFORMANCE EXHAUST–Fort Worth, TX – October 2, 2007 – D&D Performance Enterprises designed a land speed racing (LSR) exhaust system for Bikernet.com’s 5-Ball Racing Team, who set a new world record on their Panhead with famed drag racer Valerie Thompson at the controls.

The team ran a two-pass average of 156.171 mph and took an AMA World Land Speed Record (#50 in the 2000 APS PF class) with the Assalt Weapan, on a 120-inch rigid Panhead.

The design of the exhaust system was made by the Pope of Pipe and D&D President, Dave Rash. The stepped pipe system started out at 1 7/8-inch pipe for 14 inches and then stepped up to 2-inches in diameter until each pipe was exactly 35 inches long. The pipes then slipped into a collector and were attach to a slip-on megaphone.

“This LSR system has been tested to deliver maximum HP at 6,500 to 6,800 rpms,” explained Rash. “We’ve discovered that these race-based 2-into-1 performance pipes generate 20 more horses than single exhausts.”

The design of the land speed racing pipe was integral to the performance of the Accurate Engineering Panhead high performance engine. It provided the most efficient way to extract expended gases out of the combustion chamber for a top speed of 162 mph on very slippery salt surface.

“It’s a pleasure to work with Dave Rash because he constantly studies how to dig performance out of racing and street engines with his exhaust pipe designs,” said Keith R. Ball, Bikernet.com President. “His assistance helped the team achieve two world records in two years.”

“If you cut us, we bleed salt,” said Dave Rash. “We are proud of the effort Bandit and his 5-Ball Racing team put together, and we are excited about the results and even more excited about working with the team in 2008.”

D&D Performance Exhausts are available from Custom Chrome dealersnationwide or from the factory at 817-834-8961, www.danddexhaust.com.

HOT BIKE MAGAZINE CREW WORKING ON ULTIMATE BUYERS GUIDE– We will distribute 110,000 on the newsstand. One of the things about this BG is that it will have two distinct separate sections to showcase new parts. They are new parts for Cincinnati ’08 and New ’08 Bagger Parts.

This annual, must-own, comprehensive consumer guidewill feature the hottest new parts going into 2008. Hotnew categories will include: New Parts for the V-TwinExpo in Cincinnati and New Cruiser Parts. Don’t missout on being part of this valuable Buyer’s Guide that stayson newsstand for 90 days, has bonus distribution at theV-Twin Expo, and is a reference source all year long!OVER

90 DAYS ONTHE NEWSSTANDS
2-PAGE SPREAD 4C……$1,650
1PAGE……………………………$1,000
AD CLOSING 10/24/07
MATERIALS DUE 10/25/07

ON SALE DATE 12/25/07

Spread ads receive ten product showcases; one-page ads receive five product showcases.
All product showcases due 10/25/07
Product showcase 50-100 words with MSRP
No competitor SEPS. No positioning guarantees

Drop Jeff Tinnion a line for more info: Jeff.tinnion@primedia.com

CHOPPERS FOR CHILDREN– Sponsored by Forgiven Child of God Motorcycle Ministries Forgiven Child of God is a non-profit, non-denominational, Christian ministry, with it’s 3rd Rail Chapter based out of Brantley, Alabama. The “Choppers for Children” program is designed to raise money for children’s charity. The March of Dimes, the Child Advocacy Center, the Sunshine Kids, Camp Smile-A-Mile and the Amanda Cox Foundation are but a few we support.

We are building motorcycles from donated parts to be raffled off with all proceeds going to the appropriate charity. Naturally we need help in this endeavor.

Parts? Can be good used, rebuilt or new. Example: Harley,….complete engines or engine components,….full drive trains, trannys, brakes, sprockets, wheels, tires, handle bars, front forks, fenders, carbs, lights, frames, gas tanks, oil tanks, hand controls, forward controls, starters, etc.

Also can use parts for Metric bikes such as, Yamaha, Honda, Kawasaki and Suzuki. We will also accept complete old motorcycles and within a 100 mile radius of Brantley, we will pick up bikes and parts.

Naturally we will accept donations of money to buy parts that must be new. Each donation of parts or money will receive a tax exempt receipt, as we have 501c status as a ministry.

The building progress of the bikes will be featured bi-monthly in Thunder Roads of Al/Fla Magazine, Crossroads Motorcycle Magazine, Wheels of Grace Magazine, Christian Biker magazine and Dothan Magazine out of Dothan Al.

Remember,….this is for kids, so help us to help them!

–Rev. Phil “Doc” Hullar
Alabama & NW Florida Coordinator
Forgiven Child of God M/M
11304 Opp Hwy
Brantley, Alabama 36009
Home: 334-527-3674
phil@forgivenchildofgod.com

–from Rogue

LAS VEGAS BIKEFESTAND THE “TONIGHT SHOW”– For two days the “Tonight Show” crew along with correspondent Marjorie Johnson filmed activities and conducted interviews at Las Vegas BikeFest.

Marjorie is the 87-year-old Blue Ribbon Bake-Off winner that Jay sends out on the road to cover events. The crew set up some great scenes with Marjorie including a trike ride, interviews at the Bikini Contest, a late night at Hogs & Heifers and more.

The footage from Las Vegas BikeFest will air tomorrow (Thursday – 10/4). Be sure to set your Tivo, VCR, etc.

We will be sending out a post-event release very soon along with the names of all the competition winners.

–Las Vegas BikeFest
6865 S. Eastern Avenue, Ste. 101
Las Vegas, Nevada 89119
866-BIKEFEST

SCOTT JACOBS BREAKS ANOTHER RECORD–After breaking last year’s record for sales at the Sturgis Rally six weeks ago (just over two hundred canvas giclees sold), Scott Jacobs has been in the studio working on a new Marilyn Monroe painting which has been selected as the fifth image of the Marilyn series. As you can see from the visual below, this stunningly detailed painting contains THREE Marilyn Merlot bottles and took Scott over a year to complete.

Scott’s Marilyn Monroe Series has become some of the most coveted artworks in the market and LADIES IN WAITING could easily end up being the signature piece of the collection. The original painting sold recently at auction in Napa Valley for a record price. Only sixty of the Artist’s Proofs from the studio will be produced and many of those are already spoken for so don’t delay if you like this one. (Retail: $1550 or $1850 with custom frame package. 33 X 25 canvas size or 40 x 32 overall framed).

Also Mr. Jacobs will be making a personal appearance in Denver, Colorado on Oct. 11 at Fascination St. Gallery in Cherry Creek. If you will be in the area and would like to attend the show please RSVP:303-333-1566 and ask for Carlos. We will be unveiling a new wine painting that was commissioned by a patron of the gallery.

–Ron Copple
Scott Jacobs Studio
303-431-4453
www.scottjacobsstudio.com

TRIBUTE TO RICHARD QUIGLEY FUND– BOLT of the Carolinas has a great tribute page to Richard Quigley. BOLT is asking serious freedom fighters and SMRO’s to consider making a donation to the ABATE of California Judicial Fund. This fund was set up to continue the court cases that Quig started, and these cases could have national implications if the Appeals Court case is won and is published.

Contact ABATE of California to inquire about making donations.

Pan

CORRECTIONS OFFICER IN JAIL ON SEX CHARGES–Brevard County sheriff’s agents concerned about a state corrections officer’s past interactions with law enforcement lured the man out of his home this past weekend to arrest him on child abuse charges.

William Carlile, 47, is being held without bond at the Brevard County jail on 24 counts of sexual battery on a minor and 60 counts of lewd and lascivious molestation of a minor.

Carlile, a housing officer at the state-run Brevard Correctional Institution, is accused of molesting the teenage girl during a five-year period, said Lt. Tod Goodyear of the Special Victims Unit.

Given past complaints filed against Carlile – he was accused of a similar crime seven years ago by a different child, but he didn’t go to trial – his arrest may mean other children are potentially protected, Goodyear said.

This was not the first time the SWAT team dealt with Carlile.

Domestic battery charges filed against Carlile by his wife seven years ago led to a standoff with the sheriff’s SWAT team before he was arrested, Goodyear said.

BY JEFF SCHWEERS,FLORIDA TODAY

–from Rogue

BASSANI PIPES UNVEILS HASSLE FREE PLUG AND PLAY EFI TUNER– BASSANIPIPES has just released their long anticipated, application specific EFI TUNER. Developed specifically for use on all fuel injected Harley models, the unit installs in line with the stock module and allows you to maintain and optimize air fuel management when installing high performance exhaust systems.

The BASSANIPIPES EFI TUNER is a plug and play set-up that installs in minutes and DOES NOT require a computer to adjust the EFI and DOES NOT interfere with the stock ECU map. Installed properly the unit provides a noticeable increase in horsepower, torque and improves throttle response.

Each BASSANIPIPES EFI TUNER incorporates the latest third generation technology with integrated face plate buttons for easy adjustment. The unique tuners are sold separately or in conjunction with Bassanipipes record setting exhaust systems.

At just $249.95 can be ordered direct by calling 866-439-4287 or visit the entire line up at www.bassanipipes.com

FLORIDA’S PERSONAL INJURY PROTECTION INSURANCE–For many years Florida drivers were required to have Personal Protection Insurance (PIP) on their vehicles. This insurance was to cover you if you were injured by another vehicle operator. DUH! Having to have insurance to pay your medical bills if others injure you. Now if you happened to have health insurance that would cover you in the same situation you are paying twice for basically the same coverage.

During the law that expires October 1, 2007 Motorcycles had been excluded from having to have PIP.

The Florida Legislature is working on a new bill that revises the states $10,000Medical coverage for motorist and passengers. Though written to take effect immediately, it would not put all Florida motorists under the same requirements until December 1, 2007

Please note that motorcycle riders in Florida that wish to ride without a helmet must have medical coverage.

Motorcycle riders in the State of Florida are strongly advised to contact their elected officials and let them know that they wish motorcycles to be excluded from PIP as they have been in previous years. This does not mean you can not get this insurance if you desire, but That You Are Not Forced To or are excluded if you have other forms of insurance that cover you.

Why should we be forced to carry more than one insurance policy that covers us for the same thing? Please Contact Your Legislator Now, Time Is Limited!

RIDE FREE

–Rogue

BONNEVILLE SPEED DEMONS SECRET FILES–I know that I told some of our Bonneville Speed Demons about this site and the wealth of info there but the salt affected my memory and now I can’t remember who it was. I’m betting whoever it was is a reader of Bikernet.com so here’s the info. http://www.lindsaybks.com/dgjp/index.html

Dave Gingery passed away a while back but the company soldiers on finding obscure texts and plans for machines that could be built in the backyard shops that once were a staple of our youth. Please post this in hopes that the person I told about Gingery’s site will see it.

–Nick Roberts

BIKERNET ALASKAN ADVENTURE–Hey KRB, What WOULD you do for a Klondike bar?????????????????hahahahahahahahahahahahahahahahahaha

–pete(from florida)

TOP TEN PICKUP LINES FOR LADY PIRATES– 10. What are YOU doing here?

9. Is that a belayin’ pin in yer britches, or are ye … (this one isnever completed)

8. Come show me how ye bury yer treasure, lad!

7. So, tell me, why do they call ye, “Cap’n Feathersword?”

6. That’s quite a cutlass ye got thar, what ye need is a good scabbard!

5. Aye, I guarantee ye, I’ve had a twenty percent decrease in me”lice ratio!”

4. I’ve crushed seventeen men’s skulls between me thighs!

3. C’mon, lad, shiver me timbers!

2. RAMMING SPEED!

…and the number one Female Pirate Pick-up Line:

1. You. Pants Off. Now!

–from Joe Lankau

REQUEST FOR BAD SHOP STORY–I was wondering if you could do a story about guys trying to save acouple of bucks by paying people to do custom work on bikes that have nobusiness doing, causing potential accidents or deaths?

In short my buddy Al had some guy cut his goose neck off and gave ita little rake and re welded it only to have the whole front end fall offa couple of months later while he was riding in Santa Ana going about30-40 mph.

Very lucky that no one ran him over….anyways just wonderingif it would either make a good story or a beware local “custom shop”story?

–Jim …..p.s. I have pics to send ….not tomention the insurance take on the whole thing …..

james.c.campos@boeing.com>

WHIPLASH PHOTO ART–She asked why I was taking pictures of her bike

There were hundreds there that night

I replied it was because she had the finest front end

She bought me a longneck Bud

Live it up,
Whiplash Biker Photog
whiplash@photo.net

BIKERNET ALASKAN ADVENTURE RUN– Fuckin “A” lets boogie! Ya gotta go thru “God’s Country” to get there so ya will be in my backyard ! I am already collectin Bud cans and bottles for the deposit . . Too bad they don’t do that with JD bottles. Fuck I would be a gazzillionaire by now!

I guess what I’m sayin it would be a honor to ride to the Northern Lights with ya.

–MOthergoose

Stay tuned for news, maps, nose art girls and plans.–Bandit

PAUGHCO BATTERY/HORN COVERS–Paughco offers custom and restoration builders one of the widest selections of replacement components in the industry. Shown here are a their replacement battery and horn covers. Designed to be direct replacement items for FXE and Sportster models, the battery covers are available with window or embossed eagle and retail from $18.54. Horn covers are available for early or late Sportsters and FXE models and retail from $21.78.

All Paughco products feature Made In The U.S.A. quality and Paughco’s durable show quality chrome finish.

Contact Paughco at 775-246-5738 or visit them on the web at www.paughco.com.

TELEVISION PRODUCER IN SEARCH OF GOTH GIRL–My name is Katie and I am a field producer with ABC News. I am writing you to let you know that the segment on The Devil Dolls that you participated in back in 2001 with JuJu Change will be re-airing. However, it will be re-airing on the WE channel (cable network) sometime in early 2008. Would you please let me know you if you received this email as confirmation?

The producer, Joe Tobin, who worked on this piece is no longer with ABC so I am hoping that you might be able to help me track down Goth Girl, as she is no longer with the group. I know her first name is Jessica and she lives in San Francisco. I don’t know her last name. Would you have any contact information for her? Please let me know.

–Katie

TOMMY GRIMES AND MID-CONTINENT MOTORSPORTS TO MAKE NHRA RICHMOND–Pfafftown, NC: Reigning NHRA Screamin’ Eagle Nitro Harley champion Tommy Grimes will be competing at the Torco Racing Fuels NHRA Nationals held at the Virginia Motorsports Park, Oct.5-7 with Mike Bahnmaier’s Mid-Continent Motorsports team.

“Grimes is a major player and should not be written off”, according to Mike Bahnmaier, ‘mostly retired’ Nitro Harley racer and team owner from Wichita, KS. “My bike has been in mothballs and we were campaigning the Pro Dragster bike with Rick Moore. The Top Fuel bike is available that weekend and I thought what a great opportunity to show off the 2001 186 cid PRP powered Weekend chassis monster. We wanted to see Tommy go to Richmond to honorably maintain his Screamin’ Eagle Nitro Harley points lead for the NHRA exhibition championship.”

Bahnmaier’s been around the sport for years. He started Harley-Davidson of Salina in 1978. After owning the Mid-Continent Harley-Davidson in Wichita since 1987, he sold that dealership in July of 2005.

Bahnmaier, ” I started racing in 1969 on an ironhead Sportster, from 1979-88 I competed in the Pro Gas class and then went to carburated Nitro in 1988 and then Pro Fuel 1998. We won the AHDRA championship in 1999 and we’re runner-up in 2000 and I went on to Top Fuel in 2001. A couple years ago I thought I was ready to retire, but that nitro smell kept dragging me back to the track. Once you win an event on nitro it seems like you’re hooked. We love the people, the power and want to maintain a presence at the track. This is a good opportunity for both Tommy and my team.”

Bahnmaier goes on to say, “The Mid-Continent Motorsports team includes: myself, Joe and Neita Bahnmaier my mom and Dad , Dave Larson of Topeka H-D, Drew Moldenhauer, and Jody Dukelow both of Wichita, KS. We are actively and successfully competing with Rick Moore, Reading, PA, piloting our Pro Dragster program.”

Grimes is very excited about making the Torco Racing Fuels NHRA Nationals. ” Mike and I are totally committed to this event. Quite frankly, it was bothering me that I had won 2 out of the 3 NHRA Screamin’ Eagle Nitro Harley exhibitions and was concerned that without a ride, the trophy wouldn’t be really ‘earned’, I’m feeling great now and look forward to making the show and winning the event for Mid-Continent Motorsports.”

The Mid-Continent Motorsports team is supported by: Harley-Davidson of Salina, Mike’s Metal Polishing of Ransom, Ks., Gates Corporation, Saum Engineering, CP pistons, Nungesser Engineering, and Nevada Auto Mall.

–Grimes-336-766-7908
Bahnmaier-316-729-0759

THAT?S IT FOR THE NEWS–The guys left this morning and I plan to relax. Clean house, work on the courtyard and party with the girls. That?s my way of relaxing.

Have a great weekend and don?t expect me to post an article a day like Bandit does. All I have going on now that I could show photos of and talk about daily is seven little kitties running all over the Headquarters. They sure are cute? Anybody have a good home for one??

Layla

BIKERNET SMOKE OUT WEEKEND NEWS – STEVENSON CYCLE & EVIL ENG., H-D ISOLATED DRIVE SPROKET, SUCKER PUNCH SALLY TO THE SMOKE OUT, DRESSER DEAL OF THE WEEK, THE REDNECK BUELL SOLUTION, RIDLEY IN PENNSYLVANIA, RIVERA PRIMO BRUTE II EXTREME BELT DRIVES AND DOHERTY BILLET BAG LATCHES. KHROME WERKS RACKS FROM CCI, KNOCK OUT BIKE TO EBAY AUCTION, JIMS TOOL OF THE WEEK, W8LESS ROTORS FOR SONNY BARGER,

Hey,We’re going to jump right into the news. We’re packing for the Smoke Out West Run to Cottonwood, loading our weapons and sharpening our knives. I had lost my favorite knife, a 3-inch pocket Beratta, made in Japan. Sin Wu found it this morning, after two months, under the seat of the truck. It’s light and easy to carry in your pocket.

Believe me, I have a bunch of knives, but I missed this one. The Alaskan trip is heating up and Berry Wardlaw and Duffy are researching the trails. We’re trying to swing around Canada because, to be apart of this run clan, you must be a prior felon, and they’re not allowed in Canada. Actually, there are too many restrictions regarding Canada, so we’ll steer clear. Let’s hit the news. A short Hispanic lady with substantial cleavage is making me Salmon Tacos and I can’t let ’em get cold:

BIKERNET SHARPEST SOFTAIL CONTEST SPONSORED BY D&D–Vote for the sharpest v-twin Softail from the Bikernet Community. Simply vote for the one that you like the best. The motorcycle that gets the most votes receives a new set of Fat Cat pipes from D&D Performance Enterprises.

D&D Fat Cat Pipes are dyno tuned and depending upon your application can increase HP as much as 10 additional ponys. If you have modified your engine the Boarzilla pipes are made for you. They are larger in diameter really pump out the performance.Vote now!

mailto:jeff@horsepowermarketing.com>

STOLEN MOTORCYCLE DISCOVERED–The 1972 Honda CB450 – Father-Son Project – that was stolen in Denver….has been recovered, and is now SAFE AT HOME.Thanks to EVERYONE…across the NATION and around the WORLD…for helping to get the word out. This internet thing’s pretty cool.

It’s terrific to see we can all come together to help find a bike of such special significance.The America I grew up in – still exists.

Thanks, everybody!
~splatt

THE OFFICIAL WORD…..Evidently whoever tried to take the bike only got a block away. He found it this morning in an alley, kick-stand up, just sitting there. Needless to say he was very relieved and will now take some precautions to secure it. Thanks to all of you for your response. My husband and I ride and once again this cements the thought that bikers are the cream of the crop. Thanks again!

BRASS BALLS BOBBERS BIRTHDAY BASH IN STURGIS– Dar Holdsworth, Capo at Brass Balls Bobbers, made a birthday wish come true by building a copy of the company’s flagship Tattoo Bobber for a 40th birthday present. Check it out at Bikernet TV. If you want one for yourself the original Tattoo Bobber will be auction off next week on eBay. Check brassballsbobbers.com for details.

W8LESS ROTORS FOR SONNY BARGER–The second set of rotor is for the Founder of the Hell’s Angels, Sonny Barger. Sonny will be 69 this week, and Ray and the Angels of Oakland, CA are giving a set of rotors to him as he is the most influential member still living, has written 4 books, been in several movies. The angels are going to sell the rotors in all of their Harley shops worldwide (of course only in the US for now). His birthday will be a big event and will give us a lot of publicity among a large group of riders.

He has a 2001 Road King. The rotors should have standard machined blades, black carriers, and polished buttons. Please include 30 gold buttons and clips to match in case he’d rather have gold buttons. Ray has introduced me to a couple of influential members and they love Ray (he is not a member, but has known them for years).

Thanks so much in advance for preparing rotors for this weekend for our show in Myrtle Beach. If you could send me 50, I would sell them all. But the specifications for the 9 Bob gave you today will do. Another 3 would be great for a total of 12 if possible. I was thinking plain blades, orange carriers and black buttons (Harley-Davidson colors), for a total of 12 would be great.

The Atlantic City show had maybe 300 hundred people attend for both Sat and Sun. Regarding the Suzuki rotors, Chris Onwiler will get a 600cc GXR and test them. He will run his report on his web magazine, which is big among the Track Day guys. We will talk about this later.

Another important dealer I set up yesterday was the owner of the Harley Shop in Atlantic City. He is a famous drag racer and former president of the EDRA (eastern drag racing association). His dealership was just across the street from our motel. He held the Sportster rotor and the polished rotor in his hand for 20 minutes and didn’t want to let them go. He said he would be meeting with Mike Murphy’s boss at Harley this week at the dealer meeting in California. (Mike is the head of brakes and suspensions at Harley in Milwaukee.) He will be ordering rotors for his bike, his son’s bike and his top guy’s bike. The idea of a light, quiet, non-warping rotor is just what the doctor ordered for Harleys.

BIKERNET JIMS TOOL OF THE WEEK, MAINSHAFT BEARING RACE TOOL–Use to remove and install the bearing inner race on the transmissionmainshaft.No.34902-84 – Use on Big Twin Late 1984- present. Use on Twin Cam.

–JT Lepien
www.jimsusa.com

MATTHEWS BIKE BEING AUCTIONED BY KNOCKOUT MOTORCYCLES–This Knockout Motorcycle built by Ralph Randolph for Matthew McConahey is being auctioned to support the University of Texas programs.The UT auction moved onto Ebay motors:

Greulach Film & Television Corp.
420 Montana Avenue
Santa Monica, CA USA
90403
310-403-8289

DELUXE LUGGAGE RACKS BY KHROME WERKS FROM CUSTOM CHROME– New for 2006 and 2007 models. 7″-wide for more carrying capacity. Formed from 1/2″-diameter tubing and includes four tie-down loops to help you secure items to rack. Features new, heavy front and rear mounts. Easy installation, mounts to rear seat bolt and factory license plate bracket. Made in the USA. Distributed by Custom Chrome; view our online catalog at www.customchrome.com

RENEGADE BIKER MAGAZINE ON A GROWTH PATTERN–Hey Bandit! Just checking in, did you get the last two issues I sent you. The forth issue is out now and I’m working on #5 and I hope to make some money on this one. I think I have a little buzz going about the mag, everyone loves it! I have increased the circulation to 25,000 per issue and I’m up to 56 pages. Anyway hope all is well with you! As always the next time you’re in Daytona give me a call.

–Scharf
Renegade Biker Magazine

DOHERTY BILLET BAG LATCHES–Doherty Machine has just released a very cool collection of billet bag latches that are sure to provide any machine with factory H-D bags a clean, hi-tech face lift. The Doherty BILLET BAG LATCHES are CNC machined from solid blocks of billet aluminum.

A straight forward bolt-on install, each latch features hidden mounting screws for a slick clean look and are finished in flawless and durable show quality chrome.

Available in a variety of contemporary milled surface patterns the latches retail for just $173.95 per pair. You can get your hands on a set by calling Doherty direct at 800-956-9409.

Better yet, catch the complete Doherty line of unique, Power Pac intake systems, custom spacer kits, oil filters and more at www.DohertyMachine.com

THE BIKERNET TEXAS RANCH–A Texas rancher got in his pickup and drove to a neighboring ranch andknocked at the door. A young boy, about 9(red), opened the door.

“Is yer Dad home? ” the rancher asked.

“No sir, he ain’t,” the boy replied. “He went into town.”

“Well,” said the rancher, “is yer Mom here?”

“No, sir, she ain’t here neither. She went into town with Dad.”

“How about your brother, Bobo? Is he here?”

“He went with Mom and Dad.”

The rancher stood there for a few minutes, shifting from one foot to theother and mumbling to himself.

“Is there anything I can do fer ya?” the boy asked politely. “I knowswhere all the tools are, if you want to borry one. Or maybe I could takea message fer Dad.”

“Well,” said the rancher uncomfortably, “I really wanted to talk to yerDad. It’s about your brother Bobo getting my daughter, April, pregnant.”

The boy considered it for a long time….then… “You would have to talkto Pa about that” he finally conceded. “If it helps you any, I know thatPa charges $50 for the bull and $25 for the hog, but, I really don’t knowhow much he gets fer Bo.”

–from Rik Savenko

BIKERNET WEEKLY PRODUCT RELEASE FROM RIVERA PRIMO / 10-4-07EARLY MODEL BRUTE II EXTREME BELT DRIVES–Now available from Rivera Primo are early-model 1-1/2″ wide belt drives featuring the ultra severe-duty 11mm Kevlar polychain belt. Belt drive kits are designed for enclosed primary fitment, either within aluminum inner primaries or within tin(stamped steel) primary covers.

For the later aluminum primary models(1965-1984) two kits are now offered, one for kickstartapplications only, while the other is equipped with a starter ring gear for electric start models.Both models feature 34-tooth front & 49-tooth rear pulley combinations.

The earlier tin primary models(1936-1964) feature 33-tooth front & 49-tooth rear pulleys and aresold for either early tapered shaft(1936-1954) or splined shaft(1955-1964) applications.

Installation is simple following Rivera Primo’s instruction booklet.

2015-0002 Fits 1937-1954 4-Speeds w/Tin Primary & OEM-Style Dry Clutch $ 638.33 Kickstart Models / 33-Tooth Front & 49-Tooth Rear Pulleys

2015-0003 Fits 1955-1964 4-Speeds w/Tin Primary & OEM-Style Dry Clutch $ 572.78 Kickstart Models / 33-Tooth Front & 49-Tooth Rear Pulleys

2015-0004 Fits 1965-1984 4-Speeds w/Aluminum Primary & OEM-Style Dry $ 572.78 Clutch / Kickstart Models / 34-Tooth Front & 49-Tooth Rear Pulleys

2015-0005 Fits 1965-1984 4-Speeds w/Aluminum Primary & OEM-Style Dry $ 680.62 Clutch / Electric Start Models / 34-Tooth Front & 49-Tooth Rear Pulleys

For these & other fine products contact:
Rivera Primo
12450 Whittier Blvd. Whittier, CA 90602
Tel: 800-872-1515
Tel: 562-907-2600 Fax: 562-907-2606
www.riveraengineering.com

RIDLEY ANNOUNCES NEW PENNSYLVANIA PARTNERSHIP–(Okla. City, Okla.-10/01/2007) A new Ridley dealership was officially announced today in Harrisburg, Pennsylvania by Bob Kay, Ridley Motorcycle Director of North American Sales and Dealer Services. Black Dog Motorcycles has been appointed as the premier Harrisburg location for Ridley. Overlooking the beautiful Susquehanna River, the dealership’s location is the finest in central Pennsylvania.

“The association with Black Dog is very exciting, said Bob Kay, the professional atmosphere of the dealership will be very helpful in expanding the motorcycle experience to first time riders.”

Established over ten years ago, Ridley Motorcycle is experiencing a resurgence in interest as the buying patterns of male baby boomers are changing and custom manufacturers are struggling for market position.

Ridley Motorcycle offers a high quality, full size motorcycle with unique attributes first time riders prefer when becoming confident in their initial riding experience. With the ever increasing current trend of female riders, Ridley is positioned for strong growth.

“These motorcycles expand our product offering by attracting a new type of rider into our dealership. We are looking forward to introducing the automatic motorcycle to Harrisburg” commented Mike Bowers, Black Dog Motorcycles Founder.

Ridley produces motorcycles focused on safety through rider confidence. On a Ridley motorcycle new riders feel comfortable and enjoy riding without the distractions of traditional top heavy, manual shift bikes.

Ridley Motorcycle Company
35 NW 42nd Street
Oklahoma City, Ok 73118 USA
Tel. 1 (405) 525-5400
Fax 1 (405) 525-5438

Click the banner for Bikernet Advertising Rates and services.

FLORIDA TRIES TO CONFISCATE MOTORCYCLES–I contacted Terry Cook at American Motorcycle Association (AMA) and numerous other people about Florida HB 137 Relating to confiscating motorcycles for speeding and or reckless driving.This is his answer. Just for the record I have already contacted my legislators.

–Rogue

Thanks for the heads up on this bill. We are already in the act of getting this defeated before it ever sees the light of day.

I can tell you that you need to already be on the phone to the two folks that represent your particular district of Florida and letting them know how you feel about this proposal. That is the way this thing is going to be defeated – by folks like you who let their officials know this is bad legislation in a polite, concise, and articulate manner

–Terry Lee Cook
Grassroots Manager
American Motorcyclist Association

THE REDNECK BUELL SOLUTION–Mutant arch tank chassis kit $4495. Damn, here’s the solution to a stock Buell. What a wild ride. Just finish it and bolt in your Buell components. Contact Redneck for more info:

Click here for more Redneck Engineering Info.

DRESSER DEAL OF THE WEEK, SIGNED BY WILLIE G. DAVIDSON–I am the lucky owner of a Ultra Electra Glide motorcycle which was specially produced for Willy G DAVIDSONFor the opening of the first European HOG Rally in JUNE 1991. (see a

ttached photos).

But I have to sell it and look for a buyer who likes Harley Davidson and not just a mere speculation.Could you advise?

–Lucien BERGAMIN
mailto:mail@lucien-bergamin.com

SUCKER PUNCH ROLLS TO THE SMOKE OUT WEST–Sucker Punch Sally’s will be representing HUGE at theSmokeout West in Cottonwood AZ this weekend. They willhave a bunch of bikes and the whole gang will be thereincluding Christian, Donny and Jeff with T-shirts forsale and a bunch of posters and stickers, tell emBikernet.com sent ya!

I’m heading down there as well and will be hangin outat the SPS booth! I have included a pic of Jeff’s newride…not sure if he is bringing it down ornot…it’s an FL rehab that was cut…pretty killer Ithink.Ken

NEW ISOLATED DRIVE SPROCKET SYSTEM FOR TOURING MODELS–MILWAUKEE (Sept. 28, 2007) – The new Isolated Drive System Sprocket Kit (P/N 40287-07, $305.00) from Harley-Davidson Genuine Motor Accessories improves rider comfort and ride quality by dampening the mechanical noise and vibration caused by engine torque pulses. Introduced as original equipment on 2008 Touring models, the rubber compensation elements in the sprocket act like a cushion, absorbing the power pulses from the engine.

With the IDS installed, the motorcycle feels smoother and is quieter while accelerating, shifting and cruising. Kit includes sprocket, compensator bowl, and installation hardware.

Fits 2007 Touring models equipped with original equipment and most Harley-Davidson Genuine Motor Accessory wheels. Does not fit with 80-Spoke Laced Wheel P/N 42954-04, Polished Spun Aluminum Disc Wheel P/N 43760-03 or Slotted Six Spoke Wheel P/N 43932-02 (chrome) or 43933-02 (black).

For additional information on Harley-Davidson Genuine Motor Accessories, see your local Harley-Davidson dealer or visit the Harley-Davidson Web site at www.harley-davidson.com. To find a dealer near you, call toll free 1-800-443-2153 in the U.S.A. or Canada.

STEVENSON’S CYCLE AND EVIL-ENGINEERING COLLABORATE ON L.S.D.–Wayne, MI-September 27, 2007 -Stevenson’s Cycle and Evil-Engineering have put their ingenuity and experience together to create a new Lowered Starter Design belt drive with several great features.

Made to fit custom applications, this two-inch open belt drive has a Lowered Starter Design that puts the starter behind the transmission. This allows you to drop seat height and or put a larger oil tank in for more oil capacity on those big inch motors.

Evil-Engineering, is already well known for their belt drives with a helical / herringbone offset tooth design that reduces belt drive noise up to 40% over straight tooth belt while also reducing vibration. It’s designed to handle increased horsepower by having “three teeth” fully engaged at all times, making it 30% stronger as opposed to only having one engaged in standard belt drives. It’s also self-centering, so you don’t have to worry about the belt drifting on the pulley. The Lowered Starter Design belt drive system also comes with a large 7 inch clutch that provides more contact surface for those bigger inch motors.

Stevenson’s Cycle, located in Wayne, Michigan, is owned and operated by Steve Broyles Sr. and his son, Steve Broyles II. Steve Sr. has been building, customizing, and repairing motorcycles since 1969. Stevenson’s Cycle is also known in the V-twin industry for their extensive performance and engine work.

For more information go to www.stevensonscycle.com or call Steve at (734) 641-2200.

Continued On Page 2

BIKERNET LAST PAGE OF NEWS FLASH – NEW INDIAN ON BUDDY JOHNSONS PAGE, DOHERTY BILLET BAG LATCHES, HIGH COUNTRY TOY RUN, MOTORCYCLE SUPERSTORE E-COMMERCE SITE AND THE END.

Continued From Page 4

HUGE NEWS FOR THE BIKERNET.COM CO-SPONSORED SMOKE OUT WEST, BILLY LANE COMING–Huge news for The Bikernet.com co-sponsored Backstreet Choppers Smoke Out West this week. Billy Lane is building a Knucklehead bobber for this historic first West event. Billy has been a huge part of putting the Horse Smoke Out on the map.

When we started the East Coast Horse Smoke Out event years ago- it was all altruistic. We wanted an event for choppers and builders. Billy Lane is obviously a huge star now, but he really has not changed in his support for everything Chopper. He has a travel schedule that would kill a mere mortal –so I was just happy as hell to hear he could make it.

When I heard that he his building a bike especially for the event, it rocked my world. Some builders talk about their support for the underground chopper world but Billy walks the walk.

More big news, I got the following note from Bandit. ?We’re riding out, 200 strong, guns blazing, horny for roller derby girls and whiskey. Look out.?

The Smoke Out is the world?s largest Chopper Rally and will be held October 5-7 on the Verde Valley Fairground in Cottonwood, AZ (20 minutes South of Sedona). The event will start Friday – October 5, 2007 from 5pm to 11pm. Saturday, 10am to 11pm and Sunday, 10am to 4 pm. For more information (or a vender packet) check the website SmokeOutRally.com website or venders call e-mail Edge at edge.42@mac.com.

See ya there.

–Edge

MOTORCYCLE SUPERSTORE, INC. ANNOUNCES THE LAUNCH OF NEW E-COMMERCE WEBSITE–Motorcycle Superstore announced the launch of their new e-commerce website http://www.motorcycle-superstore.com. The new internally developed software platform incorporates online shopping, distribution center, customer service and product management capabilities. Improved site functionality includes enhanced navigation options, faster page loading, advanced merchandising features like video product descriptions and a much larger product selection. They have also added Cruiser and Scooter specific departments to broaden their appeal to all motorcyclists.

Motorcycle Superstore timed the launch of their new system with a simultaneous move into a new, state-of-the-art distribution center. The new facility offers significantly more warehousing space and a more streamlined distribution process. “Our goal for these major upgrades is to improve the user shopping experience while increasing efficiency and speed of delivery of products to our motorcycling customers. Customers’ expectations are on the rise and we intend to meet or exceed them as we take Motorcycle Superstore into the future”, explains Don Becklin, President and CEO.

Started in 1997, Motorcycle Superstore is an online retailer of motorcycle helmets, apparel, parts and accessories. Motorcycle Superstore is ranked #310 on Internet Retailer’s top 500 Largest Retail Websites.

–Motorcycle Superstore, Inc.
–Erick L. Barney
VP of Marketing
Motorcycle Superstore
erick@motorcycle-superstore.com
P: 541 618 7386

BIKERNET SUPPORTS MARINE CORP– The TOY RUN is just 2 weeks away!Please support the 20th Annual High Country Toy Run with aDONATION OF CASH OR MERCHANDISE…… (see attached letter)100% of ALL proceeds go DIRECTLY to purchase toys for needy kids in our area!

Call today! 719-487-8005

NEW PROSPECTIVE BIKERNET FEATURE–Thought ya might use my scoot for the barn. If it looks like something for the barn just lemme know and i will send some words and better res pics.

–nate
nobody rides 4 free
dawghauschops@gmail.com

DOHERTY MACHINE BILLET BAG LATCHES–Doherty Machine has just released a very cool collection of billet bag latches that are sure to provide any machine with factory H-D bags a clean, hi-tech face lift. The Doherty BILLET BAG LATCHES are CNC machined from solid blocks of billet aluminum. A straight forward bolt-on install, each latch features hidden mounting screws for a slick clean look and are finished in flawless and durable show quality chrome.

Available in a variety of contemporary milled surface patterns the latches retail for just $173.95 per pair. You can get your hands on a set by calling Doherty direct at 800-956-9409.

Better yet, catch the complete Doherty line of unique, Power Pac intake systems, custom spacer kits, oil filters and more at www.DohertyMachine.com

NEW INDIAN LAUNCHED ON BUDDY JOHNSON’S PAGE–We recently put up a webpage on Buddy Johnson’s award winning Indian Spirit Custom Harley.Click on the link below to view the page : http://www.blingmaster.com/buddyjohnsoncustombike/

–The BlingMaster Crew

New Black Shadow.

ICONIC VINCENT MOTORCYCLE DEBUTSNEXT WEEK AT MOTOEXPO SAN DIEGO–Del Mar, CA, September 27, 2007 —- Once respected as the fastest production motorcycle in world, the Vincent suffered a slow death in the 1950?s only to come back recently as a strikingly contemporary re-iteration where it can be seen at MOTOEXPO SAN DIEGO that roars into the Del Mar Fairgrounds next Saturday and Sunday (October 6 and 7).

David Arnold, show director for the first annual MOTOEXPO SAN DIEGO, who made the announcement this week, said two prototypes of the iconic Vincent motorcycle will be on display. The juried show of customized sports and street cruisers will also feature an assemblage of one of a kind, handcrafted motorcycles in a special display called MOTOMASTERS.

?We are honored that Rancho Santa Fe entrepreneur and rider, Bernardo Li, who is bringing back the Vincent, would agree to showcase these awesome motorcycles at our show,? said Arnold. ?The motorcycle world owes Mr. Li and his organization a ?thumbs up? for not only making the investment in bringing back the Vincent and creating these two prototypes but for interpreting the bike?s pedigree and turning it into a sleek, dynamic machine ? heavy on the horse power but lithe in handling.?

According to well-documented media reports, The Vincent Black Lightning hurtled over the Bonneville Salt Flats in Utah in 1949, pegging the needle at 151.131 miles per hour, and setting a land speed record for a production motorcycle that would remain unbeatable 20 years beyond the company?s closing in the mid-1950s.

The original Vincents, according to Arnold, were made in England and were born of speed. The original builder, Howard Raymond Davies, was committed to building a radical new bike. He did. And it reached 66 mph in 1926. Shortly thereafter, Philip Vincent, also a Brit, bought the company and, in 1949, launched the Vincent in the United States.

The Lightning.

According to Arnold, the two Vincent prototypes are among other exciting displays and activities taking place Saturday and Sunday at MOTOEXPO SAN DIEGO. The two-day event also includes a dazzling array of vintage motorcycles and MOTOMASTERS ? an invitation only, beyond-the-jury collection of priceless, one-of-a-kind handcrafted motorcycles that epitomize the highest achievement in aesthetics and engineering. Among those exhibiting are Christian Dotson and his award-winning bike that won the coveted ?America?s Most Beautiful Motorcycle award? at this year?s Los Angeles Roadster Show in Pomona, the irrepressible Roland Sands, the enigmatic Chica, and making a rare appearance will be two bikes from Confederate Motor Company ? the B-120 Wraith and Hellcat.

Tickets are available online and will be available at the gate. For additional information go to www.motoexposandiego.com

INCREDIBLE–Let?s party. Did you read the news: New Vincents coming, Confederate making another run at success and the guys who fixed Chris Craft boats are preparing something with Indian somewhere. Watch over the next couple of months as we witness motorcycle battery wars as new technology is unleashed on the custom market.

It?s fascinating. We live in a very small niche market, yet when a man or a woman has a dream and the resources to make it a reality, they?ll go for it. From the custom builder breaking his neck and pocket book to build his first bike in his or her apartment, to a full blown manufacturing facility designing a remake of the Vincent.

There?s never a dull moment when it comes to creative minds. They never stop churning out a new and exciting notion. We?ll be here to test ?em, cover them and bring you the story.

Ride Forever,

–Bandit

BIKERNET NEWS TOPS–GREGG ALLMAN TO PERFORM AT CALIFORNIA BIKE WEEK, V-TWIN TV SHUT DOWN, NEW ENGINE FROM CONFEDERATE, TWIN CAM PAN COVERS FROM PAUGHCO, NAME THE ALASKAN ADVENTURE, THE LEGACY WHEELS FROM FORGE-TEC, PRO-STREET PIPES FROM BASSANI, HISTORY OF CALAMITY JANE COMING TO BIKERNET AND BILLY LANE BIKE FOR SALE ON EBAY.

Continued From Page 3

BILLY LANE BUILT BIKE FOR HORSE MAG STAFFER ON EBAY–just FYI in case you know anyone looking for a Billy Lane built bike —Here on Ebay

–Geno

BIKERNET.COM PUBLISHES THE HISTORY OF CALAMITY JANE–I was perusing some long forgotten and out of print novels at Arthurs Classic Books when I came across this gem.The Life and Adventures of Calamity Jane, written by Herself.Four pages long it details in brief her adventures in the Old West, including how, when serving as a scout with the famous 7th Calvalry, she went to Bear Butte Creek and in the fall and winter of 1877 helped build Fort Meade and then the town of Sturgis.

Also includes the death of her friend Wild Bill Hickok, and how she caught his killer.Fascinating document, I thought you might like to post it at Bikernet.

I daresay few people have ever read it, much less any of the thousands of bikers who make the annual pilgramige to Sturgis every year.

Cheers: Jaq.

Watch for it to show up in Bandit’s Cantina History Department, maybe tomorrow.-Wilburn Roach

PACIFIC COAST NATIONALS, SEASON FINALE, FAIRPLEX, POMONA, CA-INTRODUCING CALIFA BIKE WEEK–Announcing California Bike Week, a three-day motorcycle event roaring into the Fairplex in Pomona, California Friday, November 9th and ending Sunday, November 11th with the 24th annual Love Ride, the largest one-day motorcycle fundraising event in the world. Plan to spend the weekend with enthusiasts including Love Ride Grand Marshall Jay Leno and thousands of your closest friends at the inaugural California Bike Week, a premier motorcycling experience held in one of the most motorsports-friendly cities on the West Coast. The event will feature:

– California Bike Week/Love Ride auction in conjunction with Bonham & Butterfield’s Friday, Nov. 9 at the world-famous Petersen Automotive Museum

– All Harley-Davidson Drag Racing Association (AHDRA) racing on the famous NHRA drag strip, with exhibitions by the Harley-Davidson? Screamin’ Eagles team, Friday and Saturday

– Music and festivities each day of California Bike Week

– Debut of The Pacific Coast Nationals flat track races Saturday night featuring the Harley-Davidson® Wrecking Crew and notable racers of AMA fame. This event is open to all pro-level competitors, American and metric. This event will be produced by flat track racer Gene Romero – an anticipated event not to be missed!

– Exhibitions by the Victor McLaglen Motor Corps Stunt Team

– “Ball of Steel” freestyle stunt team demonstrations

– Demo rides provided by the top major original equipment manufacturers (OEMs)

– Enthusiast trade show with hundreds of quality vendors, including the interactive Harley-Davidson® Village and traveling museum? their first time in Pomona

– Sunday’s 24th annual Love Ride,® and anticipated headlining concert benefiting the Muscular Dystrophy Association, Reading by 9 and Cure Autism Now (entertainment announcement coming soon!)

– Huge complimentary barbecue for Love Riders

– A Veteran’s Day tribute ceremony

– AND FREE PARKING ALL WEEKEND FOR ALL MOTORCYCLISTS!

The California Bike Week partnership is comprised of the Southern California Harley-Davidson Dealer Association, the Northern California Harley-Davidson Dealer Association and The Love Ride Foundation. Mark your calendar for November 9-11, 2007 and in the meantime, for more information on California Bike Week and/or The Love Ride? please call 1-877-CAL-WEEK (1-877-225-9335). Visit us online at http://www.calweek.com.

Fairplex, 1101 West McKinley Ave., Pomona, CA 97424Tickets & Info: (541) 642-7561Race Date, Saturday, November 10, 2007www.calweek.com

LONE STAR CHOPPER TO BE FEATURED ON BIKERNET.COM AND IN AUSTRALIA’S HEAVY DUTY MAGAZINE–Err. . . yes absolutely did shoot it and you’re right she is a beauty.However, Glenn lost his notes of whose bikes they were and I’ve been meaning to remember who the chick was that also shot them (and arranged it).

I think it is Colleen Swartz.I would appreciate her contact details if you have them as I shot two other bikes also that she arranged.

I’m happy for you to put the feature together for us if you have time.

–Doc

VICTORY PRO-STREET PIPES FROM BASSANI–Looking for a bump in horsepower and torque while giving your Victory a change in attitude? That’s exactly what you can expect with these new PRO-STREET pipes. Just introduced by Bassanipipes the new PRO-STREET exhaust shown here features a triple step 1 3Ž4″-1 7/8″-2 1Ž2″ pipe configuration, removable spiral louver core baffles and slash cut tips.

Victory PRO-STREET pipes are a bolt on replacement for the stock system and mount using included hardware and some stock components. As with other record setting Bassani Pro Street exhausts, the new Victory system produces increased horsepower and torque you can actually feel and an exhaust note like no other.

Retail on the new system is $602.00. For complete details call 714-680-3543 or catch them on the Web at ww.bassanipipes.com.

2ND OLD SCHOOL BIKE RODEO– “Party in the Pasture”NOVEMBER 9-10-11th 2007 27151 Soult Rd. Brooksville, Fl.ALL PROCEEDS BENEFIT DISABLED VETERANS

NO ONE UNDER 18 ALLOWEDPresented by: The Bull-It Rodeo, Scootergoods Magazine, The Chickenman, VFW Post 8713,www.scootergoods.com, 1-800-4-INJURY

Live Music By:CORE, Bad Apple, Substance Abuse,Thunderstruck, The Back Alley Blues Band$10 BUCKS PER PERSON AT THE GATEFree Primitive Camping, RV’s Welcome, Campfires permitted!Coolers Welcome CANS ONLY PLEASE

NO WEAPONS NO ATTITUDES

Check In starts 8am Friday Nov. 9th Out by 4pm Nov. 11thOld School Bike Games & Our WORLD Famous Adult GamesScreamin’ Orgasm * Love the Banana * Wet Tee* Sand the Woodyand a whole lot more, plus some NEW ONESVendors Spots are Available for $30 Bucks

Please call J.O. 352-540-5123 DonV 352-596-3704

FORGE-TEC INTRODUCES A NEW 3D WHEEL – THE LEGACY–Oxnard, CA- Advanced Metalforming Technologies, Inc. (AMT), an industry-leading manufacturer of high-end aluminum wheels and blanks supplier to many of the industry’s leading wheel manufacturers has recently started manufacturing motorcycle wheels under their own brand name? Forge-Tec Motorcycle Wheels and Accessories.

There are 13 different styles to choose from, all in a wide variety of American V-Twin (including Big Dog), Victory Motorcycle and Harley-Davidson popular sizes and applications. All are available with matching rotors, pulleys and sprockets including their flagship wheel? The Legacy! The Legacy, one of the “seven wonders” of the wheel world, features a totally unique 3 dimensional “inverted” spoke design. “It’s an ideal alternative for the rider that likes the look of spokes, but wants the performance of a forged one-piece wheel”, stated Mark Finnie, GM for Forge-Tec Motorcycle.

All processes are completed in-house, utilizing only state-of-the-art equipment and highly sophisticated process technologies. All Forge-Tec wheels are rotary forged utilizing one of their proprietary forge presses using only “virgin” aircraft grade 6061 aluminum.there’s no recycled aluminum in their products.

All wheels go out shipped with the rotors and pulley attached and torqued to OEM specs which eliminates a lot of guess work at the dealer level and ensures that wheels arrive to their customers in perfect condition.

For further information on complete wheels, please contact Forge-Tec Motorcycle directly at 888-367-4385. Forge-Tec Motorcycle Wheels and Accessories, 950 Richmond Ave., Oxnard, CA 93030. Dealer inquiries invited!

Sorry guys, that?s all you get in the news. Watch for all of her in the Girls Of Bikernet.

NEW GIRL OF BIKERNET COMING FROM EUROPE–Attached some new – and some shown before and commented “incredible” – shots.I’d prefer the white bike outside with blonde Jenna for this time. It’ll be a nice change after the Samira-studio-series. And a really unique bike.

Cheers,

–Viking

BIKERNET ALASKAN ADVENTURE NAMES– Just came outta the fog with these ideas for the run name . .

1. Caribou Caravan
2. Klondike Quest
3. “There’s No Place Like Nome ” Run
4.The Alaskan ” IDIDTHERIDE ”
5. How Bigs Yer Nuggets Run

Gotta start using that Tundra Fuck in the smoking utensil more often !

1 more . . ” Thunder to the Tundra ”

–MOthergoose

My first thought when I read about your planned excursion…..was: The Call of the Wild………it fits in SO MANY ways. I just used the word excursion….and the Alaska Excursion has a nice ring to it as well. Those are my entries. Looking forward to seeing you in Cottonwood !

— DustyDan

THE ROYAL ENFIELD SHOP– Yellow Royal Enfield Dealer Signs available in classic tin.

–Dorothy
(Humble Scribe)
…and the Staff of Classic Motorworks
1405 Cannon Circle, Suite 12
Faribault, MN 55021
Toll-free Phone: 800-201-7472
Fax: 507-333-0782

TWIN CAM PAN COVERS FOR THAT CLASSIC LOOK FROM PAUGHCO– Are you looking at the coolest thing since Apehanger bars? You bet. Paughco, Godfather of the chopper industry, has just released these awesome PANHEAD STYLE ROCKER COVERS for installation on all 1999 through 2008 Twin Cam engines.

Real crowd stoppers, Paughco’s TC Pan covers feature flawlessly chromed steel Pans with, CNC machined billet aluminum D-rings. Their four piece design makes for easy in frame installation and once installed give your TC the appearance the nostalgic look of an engine that made chopper history.

Sold in sets they retail for just $649.95 and come with necessary mounting hardware including gaskets. You can be purchased them from Paughco dealers worldwide or by calling 775-246-5738.

Catch the entire Paughco line up at www.paughco.com

OFFICIALS FIRE ALTON POLICE CHIEF ACCUSED OF SEX ASSAULT– ALTON, Texas – The chief of police has been fired weeks after the South Texas lawman was accused of sexually assaulting two male employees.Jose Luis Vela was suspended after his Aug 29 arrest on two charges of sexual assault. Since then, three current and former police department employees have accused Vela of sexual harassment.

Vela was officially fired Friday for poor record keeping and possible theft of confiscated items. City Manager Jorge Arcaute said allegations surfaced accusing Vela of stealing alcohol confiscated by his department.

Vela said he never took confiscated beer, nor was he involved in logging items.He is out on bail and plans to plead not guilty to all the charges.

Investigators have accused Vela of performing oral sex on a male employee after the man passed out drunk at a party about a year ago at Vela’s home in Mission, according to court documents. Vela is also accused of violating a different male employee with an object while that man was passed out at a party in July, Sheriff Lupe Trevino said.

Alton is a town of about 4,400 residents, located 10 miles north of the Mexican border in the Rio Grande Valley.

–from Rogue

Bikernet investigators have made Alton off limits for readers, until this matter goes to court.-Da Judge

NEW ENGINE FROM CONFEDERATE MOTORCYCLES–Confederate uses Small Block ‘slice’Confederate Motor Co., a Birmingham,AL, specialty motorcycle builder, hopes tosmash the mold of such bikes as deriva-tives of Harley-Davidson design andengineering.

The company’s raison d’êtrehas been unique, minimalist original de-sign, but it continues to use a 45° V-twinengines like those of Harley-Davidson.

Confederate is plotting is own newengine using a different architecture, butcreating an engine from a clean sheet ofpaper and contracting for supply of thecomponents is too expensive a propositionfor the small startup manufacturer.

To trimsome of the expense of designing, devel-oping, and testing components, the com-pany’s new engine is derived from an exist-ing design so that some of the existingexperience with that engine can be ex-ploited and some of its components used.

Confederate turned to another Americanengine just as iconic as the Harley V-twinfor its architecture: the Chevrolet SmallBlock V8.The engine planned for use inConfederate’s next model borrows thearchitecture of a two-cylinder slice of theV8 design. While this solution obviouslyrequires a custom casting for the engine’sblock and heads, Confederate is able touse some internal parts from the GeneralMotors supply chain, including the verydesirable Mahle titanium connectingrods used in the Corvette Z06’s LS7 en-gine.

Confederate contracted with enginedevelopment specialist Katech to designand supply the engines after seeing thecompany’s handiwork in producing thesuper-sized Small Block V16 used in theCadillac Sixteen concept car.

Now, Confederate is developing theRenevatio, its first motorcycle that doesnot feature a Harley-inspired 45° V-twinengine. “This was really the bike wewanted from the beginning,” saidConfederate founder Matt Chambers.

Current models, such as the Wraithand the Hellcat, prominently exhibit enor-mous frame tubes, but they will be lessvisible on the upcoming Renevatio be-cause the new 90° Chevy-based V-twinalso serves as the frame’s main compo-nent. The goal is to advanceConfederate’s mantra of simplicity, withthe dual benefits of light weight and re-duced cost.

“I think you’ll find our system is smallerand lighter than anyone else’s, and I thinkit looks cooler,” said Chambers. He alsopredicts the new bike will come in at lessthan 300 lb (136 kg), though the engi-neering team at Katech says it is aimingfor less than 400 lb (181 kg), according toCaleb Newman, Director of AftermarketOperations for Katech.

Easyriders events owned by separate company are still going strong.

PAISANO’S V-TWIN TELEVISION SHUT DOWN, MANY MAGS HAVE BEEN SOLD INCLUDING EASYRIDERS–Recent reports indicate that V-Twin television was canceled from the Speed Channel, but the company is looking for alternative outlets. Whereas previous reports indicate that V-Twin magazine and Tattoo were sold, recent reports point to the sale of Easyriders. We are waiting for more info.

NEW MOTORCYCLE BUSINESS UNIT VICE-PRESIDENT NAMED IN NORTH AMERICA–ROME, Ga. Sept. 24, 2007 Scott Griffin, formerly of Maxxis, will succeed Mark Wilhelm as Vice President of the motorcycle business unit at Pirelli Tire North America. Mr. Griffin will commence his role at the beginning of October.

“On behalf of Pirelli, I would like to thank Mark for his contribution to our growth and success in North America and we wish him well in his new role in Europe,” commented Chairman & CEO of Pirelli Tire North America, Hugh Pace.

Pirelli Tire North America specializes in the manufacture and marketing of high performance car, light truck and motorcycle tires. An industry leader in technology and quality, Pirelli operates its highly advancedModular Integrated Robotized System (MIRS) in Rome, Georgia, to better serve the American OEM and Replacement markets.

For more information please visit: www.us.pirelli.com.

mailto:metzelerpressna@mindspring.com

NEWS FLASH! Gregg Allman to Headline The 24th Annual Love Ride, as Part of the InauguralCalifornia Bike Week!–Pomona, Calif. (September 19, 2007) – Gregg Allman, in addition to an all-star band with surprise guests, will be rockin’ the house at this year’s 24th Annual Love Ride at California Bike Week! California Bike Week is a three-day motorcycle event roaring into the Fairplex in Pomona, California Friday, November 9th and ending Sunday, November 11th with the 24th annual Love Ride, the largest one-day motorcycle fundraising event in the world.

Plan to spend the weekend with enthusiasts including Love Ride Grand Marshall Jay Leno and thousands of your closest friends at the inaugural California Bike Week, a premier motorcycling experience held in one of the most motorsports-friendly cities on the West Coast. For more information on California Bike Week and/or The Love Ride please call 1-877-CAL-WEEK (1-877-225-9335). For media inquiries, please contact Christine Eastman at 949-481-5561 or ceastman@cox.net. Visit us online at http://www.calweek.com.

Continued On Page 5

BIKERNET NEWS ALERTS–MORE RIDERS HURT ON HORSES THAN MOTORCYCLES, VANCE & HINES PRO PIPES FROM METRIC THUNDER, HOW DO WE MAKE DRIVERS SHUT UP AND DRIVE, ANNUAL DESERT KNIGHTS MC VETERANS DAY POKER RUN, WHIPLASH PHOTO OF THE WEEK, ABATE OF IOWA CALL TO ACTION, BIG TWIN WEST CELEBRATES DESIGN EXCELLENCE, PAUGHCO UNIVERSAL TANKS AND MRF/LUCAS OIL BIKE SWEEPSTAKES WINNER ANNOUNCED.

MRF/LUCAS OIL BIKE SWEEPSTAKES WINNER ANNOUNCED–At the close of a very successful 23rd Anniversary of the MotorcycleRiders Foundation (MRF) Meeting of the Minds in Cedar Rapids, Iowa thehighly anticipated drawing for the donated MRF Lucas Oil sweepstakescustom bike was held September 22nd.

The winners are MRF and ABATE of Colorado members Jim and Renee Clark ofColorado. They were not present, however the large contingent inattendance from ABATE of Colorado represented them well. Pictures of thisgroup as well as a photograph of the winners receiving the keys and thebike will be available on our website (www.mrf.org) shortly and in theupcoming issue of the MRF Reports.

The very entertaining call to thewinners recorded live to inform Jim and Renee of their new addition can beheard on www.inbradio.com in the first week of October.

During a call the next day between MRF President Kirk “Hardtail” Willardand Jim Clark in order to arrange pickup, Hardtail jokingly asked Jim ifhe thought he could handle the 140HP fire breathing S&S powered custompro street bike and Jim replied by stating he was sure he could since itwould be parked next to his 190HP drag racing bike.

The Motorcycle Riders Foundation would like to once again thank thefollowing people and companies who played a major role in thissweepstakes: The Lucas Family and Lucas Oils, Lucas Cycles and the buildteam led by Master Builder James Crain, Easyriders and V-Twin magazinesand Bike Shows, Michael “Balls” Farabaugh of Michael Farabaugh Studios andLucas Oils, DRM Framelock, the MRF Lucas bike transportation team, and toJohn Pierce, Deb Butitta, Marc Falsetti, Miles France, Eric Hampton, andSarah Muckenhoupt of the MRF for all their hard work to pull this off.

And lastly we would like to thank all of our MRF members, our MRF StateRepresentatives, and to all of our State Motorcycle Rights Organizationpartners who embraced and promoted this program so well. In recognition ofyour efforts we are pleased to announce that today our membership standsat an all time high.

UNIVERSAL HIGH TUNNEL CHOPPER TANKS– Once again Paughco has you covered when it comes to real deal chopper tanks that are as functional as they are cool looking. Shown here is one of their latest additions to the popular High Tunnel line of universal gas tanks for custom applications.

This particular unit boasts a 4 gallon capacity but other are available in 3.5 and 4.6 gallon capacities.. Designed primarily for bikes with stretched back bones they feature retro Tear Drop styling and are fit with stock style screw in filler vent (cap not included) and 22mm external threads on the petcock bung.

The 4 gallon tank measures 21″Lx 12″W x 9″D. Tunnel is 5 ” deep and 3″ wide and centerline hole-to-hole on the mounting brackets is 22″.

Retail is just $299.95 and the caps go for $18.95. For complete details call 775-246-5738 or catch them on line at www.paughco.com

He didn’t build this bike, but a local asked him to ride it.

PAUL YAFFE WRECKS, SURVIVES AND WILL TRY TO MAKE THE SMOKE OUT WEST– I had a damn good wreck last week, and I’m still healing up. I might have to travel to Seattle on business over that weekend? So, if I don’t have to go to Seattle and my bones have healed enough for a ride, I’ll be there…On your favorite bike.

Can I still hang with you guys???I sent you a few pictures of the bike…I broke it in half!!!

Who needs an ego or self esteem anyway???!!! Mine’s now gone and I hardly feel any difference!

On a biz note, I am launching my new bagger web site next week. I’ll send you info. Still alot of work to do before next week.

Hope all is well…Have a great ride out here! The weather just got Kick Ass!!!

–Yaff

A CELEBRATION OF DESIGN EXCELLENCE AT BIG TWIN WEST– The leading showcase of one-off bikes that speaks to the unique lifestyle and individuality of the custom market is looking for builders. Big Twin Customs Invitational recognizes custom builders who are leading the industry with their innovative designs and concepts on an international level.

Only 200 builders will be chosen to participate in this premier invitation-only bike showcase held at the University of Phoenix Stadium in Phoenix, Arizona during Big Twin West and the Phoenix stop of the Cycle World International Motorcycle Shows? presented by Toyota.

Download the brochure and learn more about the show.

Submit Your Bike Today! We’ve made it easy ? you can now submit your bike online, by mail or by fax.

Online :
1. Fill out the online entry form.
2. Upload photos of your bike to our website
3. We’ll email you to confirm we received everything

Mail/Fax:
1. Download the entry form in PDF form (click here )
2. Mail us 5 pictures of your bike.
3. We’ll email you to confirm we received your entry form and photos.

Deadline to enter: October 8, 2007

Awards

While Big Twin Customs Invitational is not a competition or a contest, we realize that everyone likes recognition for their work. In that spirit, we will be honoring builders with ?best of?? honors in six categories:

Best Paint
Best Fabrication
Excellence in Engineering
Best Old School
Exhibitors? Choice
Excellence in Design

Make Your Move

Showcase your bike in front of over 25,000 Big Twin dealers and enthusiasts over a 4 day period.

Meet with manufacturers interested in partnership ventures and cross-promotional opportunities with the rising stars of the custom market.

Questions?
Bill Rupert
408-710-2463
bill.rupert@sbcglobal.net

Kathryn Groble
714-513-8646
kgroble@advanstar.com

BIKERNET UNIVERSITY HISTORICAL DEPARTMENT STUDY-GUN CONTROL– In 1929, the Soviet Union established gun control. From 1929 to1953, about 20 million dissidents, unable to defend themselves,were rounded up and exterminated.

In 1911, Turkey established gun control. From 1915 to 1917, 1.5million Armenians, unable to defend themselves, were rounded upand exterminated.

Germany established gun control in 1938 and from 1939 to 1945, atotal of 13 million Jews and others who were unable to defendthemselves were rounded up and exterminated.

China established gun control in 1935. From 1948 to 1952, 20million political dissidents, unable to defend themselves, wererounded up and exterminated.

Guatemala established gun control in 1964. From 1964 to 1981,100,000 Mayan Indians, unable to defend themselves, were roundedup and exterminated.

Uganda established gun control in 1970. From 1971 to 1979,300,000 Christians, unable to defend themselves, were rounded upand exterminated.

Cambodia established gun control in 1956. From 1975 to 1977, onemillion ‘educated’ people, unable to defend themselves, wererounded up and exterminated.

Defenseless people rounded up and exterminated in the 20th Centurybecause of gun control: 56 million.

During W.W.II the Japanese decided not to invade America becausethey knew most Americans were ARMED!

–from Bob Clark

ATTENTION ALL RIDERS…NATIONWIDE CALL-TO-ACTION FROM ABATE OF IOWA…PLEASE ACT NOW–ABATE OF IOWA is calling on all American motoryclists concerned about their Right-to-Ride to contact their U.S. Senators and Representatives and request that Congress initiate proceedings to reduce or eliminate the budgets of the National Highway Traffic Safety Administration (“NHTSA”) and the National Transportation Safety Board (“NTSB”) on the grounds that they are (a) illegally conspiring to circumvent the state lobbying restrictions placed on NHTSA by TEA-21 (the Transportation Equity Act for the 21st Century), and (b) irresponsibly wasting millions of taxpayers dollars focusing on an issue that constitutes only a minor portion of overall traffic injuries and fatalities. Here is their agenda…

http://tinyurl.com/2tmgj6
…and here is how it fails us:
http://tinyurl.com/2l4evp

PLEASE use the links below to find and contact your U.S. Senators and Representatives TODAY. And when you do, please remember that the issue here is NOT the utility of helmets, and goes FAR beyond the futility of helmet laws. So don’t focus on freedom of choice, letting riders decide, or how much you enjoy the wind in your hair. Instead, please focus on the fact that NHTSA and the NTSB are operating illegally and irresponsibly, wasting millions of taxpayer dollars on misguided agendas, and that it is time for Congress to tighten the purse strings and rein in these rogue federal agencies!

–From: Steve Eggleston
mailto:sreglstn@netins.net

BIKERNET TRIBUTE TO BROTHERS AND SISTERS OVERSEAS–Come home safe brothers!

–Whiplash Biker Photog
mailto:whiplash@photo.net>whiplash@photo.net

ANNUAL DESERT KNIGHTS OF AMERICA MC VETERAN’S DAY POKER RUN–We’d like to invite everyone to come out and ride in the 2nd Annual Desert Knights of America MC Veteran’s Day Poker Run! We’ll be starting at Renegade Classics in Woodbridge, and riding through some of the most scenic countryside in Northern Virginia. You won’t want to miss it!

All proceeds will benefit the Fisher House – there’s no better day to support our veterans than on Veteran’s Day, Sunday, November 11, 2007! Registration starts at 10:00 a.m., and wheels up at 11:15.

Check out our website at www.desert-knights.com or contact us at info@desert-knights.com for more information.

–Chuck
mailto:criddle123@earthlink.net>criddle123@earthlink.net

OFFICIAL OPEN LETTER TO THE READERS OF BIKERNET FROM WILDMAN CUSTOMS–Be very aware that this message could contain nudity and strong language:

“CHECK OUT OUR WEBSITE WILDMANSCUSTOMS.COM”

That’s it. There ain’t no mo’.

BRUCE ON BIKERS RIGHTS–THERE ARE MORE THAN 18 WAYS TO SHUT’EM UP (Help Me Pick the Winner of our HANG UP AND DRIVE Contest!)–On 13 September 2007, I sent a letter to National Transportation Safety Board (“NTSB”) Chairman Mark Rosenker in which I pointed out that restricting cager cellphone conversations could have saved as many as 10,660 lives in 2006, which is about 15 times more than would’ve been saved by lidding every rider in the land:

http://tinyurl.com/2jcefx

But the calls continue … and so does my call for Mr. Rosenker’s resignation. One reason we delay in dealing with this deadly distraction is the slippery slope argument that there are many other sources of distraction that are equally dangerous. In other words, why single out talking on a cellphone as opposed to eating a burger, drinking coffee, fiddling with the radio, flirting with your date, or yelling at the kids? Are cellphone conversations really more distracting and deadly than any of these? Well, the cellphone industry certainly wants us to think the answer to the last question is “No.”…

…but as Malcolm Gladwell and David Strayer explain, the true answer is “Yes!”:

“This is a common problem in driving. Talking on a cell phone and trying to drive, for instance, is not unlike trying to count passes in a basketball game and simultaneously keep track of wandering animals. ‘When you get into a phone conversation, it’s different from the normal way we have evolved to interact,’ David Strayer, a professor of psychology at the University of Utah, says. ‘Normally, conversation is face to face. There are all kinds of cues. But when you are on the phone you strip that away.

It’s virtual reality. You attend to that virtual reality, and shut down processing of the here and now.’ Strayer has done tests of people who were driving and talking on phones, and found that they remember far fewer things than those driving without phones. Their field of view shrinks. In one experiment, he flashed red and green lights at people while they were driving, and those on the phone missed twice as many lights as the others, and responded far more slowly to those lights ghts they did see.

‘We tend to find the biggest deficits in unexpected events, a child darting onto the road, a light changing,’ Strayer says.

Last month, I posed that question to our readers in form of a contest. Here was the offer…

“IF YOU HAVE ANY SERIOUS, ORIGINAL, FEASIBLE AND LEGITIMATE IDEAS AS TO WHAT ACTIONS AMERICAN MOTORCYCLISTS CAN TAKE ON THE STREETS TO ENCOURAGE CAGERS TO HANG UP AND DRIVE AND/OR PENALIZE THOSE WHO DON’T, PLEASE POST IT ONLINE HERE:”

“THE CONTRIBUTOR OF THE BEST QUALIFYING IDEA POSTED NO LATER THAN 15 SEPTEMBER 2007 WILL RECEIVE A CASH PRIZE OF ONE HUNDRED DOLLARS ($100.00). ALL ENTRIES WILL BE JUDGED BY BRUCE ARNOLD, WHO WILL ANNOUNCE THE WINNER AND MAKE THE AWARD BY 15 OCTOBER 2007.”You will find the totality of our contest submissions posted here:http://tinyurl.com/2j429z

We promised to announce a winner by Monday, 15 October, so please post your votes to our forum no later than midnight ET on Sunday, 14 October 2007.

Until Next Time … Ride Long, Ride Free!

–Bruce Arnold

Where’s that zero tolerance bullshit when it comes to talking on cell phones and killing people? –Renegade

VANCE & HINES PRO PIPE FROM METRIC THUNDER– Metric Thunder has the Vance & Hines Pro Pipe available for guys and gals that want some real performance from their Harley Softail. 2-into-1 exhaust systems provide the absolute greatest power increase. Metric Thunder sez you could see as much as 10HP with fuel injection tuner and a high-flow air cleaner.

The Pro Pipe is 100% blue proof. From its 2-1/8″ header and collector heat shields, to its new full coverage megaphone heat shield, Pro Pipe BP carries on the heritage of track proven performance, now with a blue proof chrome finish. Includes mounts for factory O2 Sensors. Checkout Metric Thunder’s V&H Pro Pipes here and all of their V-Twin pipes? always on a discount and normally available within a day of shipping.

–Jeff Najar
Horsepower Marketing

HORSES MORE DEADLY THAN MOTORCYCLES–Hour-per-hour more equestrians are seriously hurt, study showsThat is the surprising revelation of a new study from researchers at the University of Calgary.Equally surprising is that those being hurt and killed are not rookie equestrians but, in large part, veteran riders.

“If you’re 47 years old, a good experienced rider and it’s sunny out, you can still get seriously hurt or die,” said Rob Mulloy, an assistant professor at the University of Calgary and co-author of the study.

The reason this happens, he said, is that “horses are independent beings with their own agenda.” Not to mention that horses weigh up to 500 kilograms, move at a speed of up to 65 kilometres an hour, elevate riders up to three metres above ground and kick with a force of nearly one ton.

The research, published in the American Journal of Surgery, is based on a decade of trauma data collected at Foothills Medical Centre in Calgary.

From 1995 to 2005, there were 7,941 trauma patients at Foothills, including 151 who were severely injured while horseback riding.

Seven per cent of the riders died of their injuries and 45 per cent required surgery, the study said.

“For many of the people we interviewed, their riding accident was a life-changing moment,” said Jill Ball, an occupational therapist at Foothills and co-author of the study.

She said that, while she grew up riding horses, the research has changed her perspective on the safety of the sport and the need for protection.

“I now wear a helmet and vest when I go riding,” Ms. Ball said.

The hospital admission rate associated with horse-riding injuries is 0.49 per 1,000 hours, compared to a rate of 0.14 per 1,000 hours of motorcycle riding, according to the research.

Among those treated for traumatic equestrian injuries, only 9 per cent had been wearing a helmet. Thirty-one per cent wore other protective equipment, such as Kevlar vests.

Almost half of all riders who were seriously injured (48 per cent) suffered head injuries, and 54 per cent suffered chest injuries. Most riders were hurt by falling or being thrown from the horse, followed by being stomped or kicked.

In Western riding there is a tradition of wearing a cowboy hat rather than a helmet. In English riding, a helmet is the norm.

Dr. Mulloy said he takes comfort in the fact that about half of rodeo riders now wear helmets and a large number of cowboys who drive cattle out of the hills are also helmeted.

By ANDR? PICARD,From Tuesday’s Globe and Mail

Continued On Page 4