racing

Honda CBR1000RR-R Fireblade SP Races its Superbike Counterpart

General Posts / By

by Sebastian Toma from https://www.autoevolution.com Honda has pitted the new CBR1000RR-R Fireblade SP against its racing version on a track to prove how fast it can be in the right hands. With slick tires, the sport bike is as close to a street-legal MotoGP racer as possible. The resemblance between the two is normal, as British Superbike rules mandate that the race bike must be developed from the homologated production motorcycle. Therefore, the chassis and the engine are identical, but the race bike has a few tweaks within regulations to allow it to be even faster. According to the rulebook, the Honda CBR1000RR-R Fireblade SP’s racing version must have a spec ECU, which allows it to rev even higher than its street-legal brother. The gearing can also be changed according to various necessities, depending on the track and rider preference, along with a minimum weight of 168 kg (370.37 lbs.). To prove just how fast the street-legal version of this bike can be, Honda Racing UK British Super Bike racer Glen Irwin took both bikes on the same day at Oulton Park International Circuit. We are talking about a 2.69-mile (4.33 km) track in the UK and identical riding conditions. Honda even fitted both bikes with the Pirelli Diablo Racing slicks (SC0 compound) to allow a direct comparison between the two bikes. The street bike was still fitted with the stock mirrors, standard toolkit, and everything else one gets when buying a new Honda CBR1000RR-R Fireblade SP. The slick tires were the only change from the stock condition, and the team did not alter any settings on the bike. Glenn Irwin rode each bike for six laps, and he managed to set a time of 1’39.054 on the production CBR1000RR-R Fireblade SP, which is just 2.872 seconds more than what […]

Honda CBR1000RR-R Fireblade SP Races its Superbike Counterpart Read More »

Pirelli Nation Riders Set Sights on 2021 AMA Amateur National Motocross Championship

General Posts / By

The 40th Annual Amateur National Championship Will Run August 2-7 ROME, Ga. (July 28, 2021) – Pirelli Tire North America has its sights set on the 40th annual AMA Amateur National Motocross Championship at Loretta Lynn’s Ranch in Hurricane Mills, Tennessee, which is set for August 2-7. Pirelli will be on-site to assist its #PirelliNation rider support program and offer technical advice to all racers competing on SCORPION MX tires. Amateur racers are presented the opportunity and access to the very same tires use by Pirelli’s professional racers and factory race teams, including world champions such as Tim Gajser, Antonio Cairoli, and Jeffrey Herlings. Pirelli’s approach of “we sell what we race, we race what we sell” ensures the development of the brand’s products for motocross-specific tracks and that the consumer is receiving the latest technology available. “The AMA Amateur National Championship is always special,” said Nick Walton, off-road race manager, Pirelli. “There’s a lot of great history within the sport at Loretta Lynn’s, including with some of the sports brightest stars. Pirelli is proud to support all of its racers and families who have sacrificed and dedicated so much throughout the year for the opportunity to compete. Pirelli continues to offer amateur racers access to the very same tires used by our professional racers, which we believe will help them reach the top step of the podium.” Pirelli will support a wide variety of talented amateurs including the BarX/Chaparral/Ecstar Suzuki Racing team, ranging from up-and-coming minibike stars to veterans and amateur pros who are set to make their professional debut later in the year. The SCORPION MX lineup ranges from 10-inch to 21-inch sizing and offers race-winning performance for 50cc – 450 cc riders. The SCORPION MX range consists of three primary tread patterns with the SCORPION MX Soft,

Pirelli Nation Riders Set Sights on 2021 AMA Amateur National Motocross Championship Read More »

Johnny Lewis at Flat Track and Build-Train-Race ladies

General Posts / By

JOHNNY LEWIS TAKES HARD-FOUGHT FOURTH AT PORT ROYAL HALF-MILE Women of Royal Enfield BUILD TRAIN RACE battle on at second BTR exhibition race Milwaukee, WI (Monday, July 26, 2021) – On the heels of their historic win at Lima Half-Mile, Johnny Lewis and the Moto Anatomy X Royal Enfield Team were looking to start a hot streak aboard the Royal Enfield Twins FT at the inaugural Port Royal Half-Mile, round eight of the Progressive American Flat Track Championship at Port Royal Speedway in Port Royal, Pennsylvania. While the all-new venue held its share of challenges for Lewis, he and the Moto Anatomy X crew fought for every inch throughout the day, ultimately coming in fourth overall in the AFT Production Twins main event. “Days like today remind me what a great crew we have,” said Johnny Lewis, “Today had its ups and downs but our Moto Anatomy crew never stopped working hard. It was a bit of a battle for us, but we had competitive lap times in the end; it just showed that our work throughout the day paid off. It was great to end tonight on a positive note.” After a hard-fought battle with Dan Bromely for fourth in the main event, Lewis was able to edge him out by 0.007 seconds at the checkered flag—an incredible sight for the Port Royal fans. “Within the team, it was a success!” Lewis added. “Johnny puts every ounce of himself into each race weekend and you could see it at Port Royal,” commented Breeann Poland, Marketing and Communications Lead – Royal Enfield Americas. “After battling some issues throughout the test and earlier in the day he was able to push through to a fourth-place finish today. We were proud to see this level of passion and dedication from the whole

Johnny Lewis at Flat Track and Build-Train-Race ladies Read More »

Ducati Panigale V2 Bayliss 1st Championship 20th Anniversary Honors a Legend

General Posts / By

by Sebastian Toma from https://www.autoevolution.com Ducati is celebrating 20 years since Troy Bayliss won his first World Superbike championship. A special edition of the Panigale V2 has been made, and it comes with several goodies on top of the regular model. It had to be painted red, and Bayliss’s race number is also on the special edition Panigale, which also features graphics inspired by the 2001 championship-winning bike. The special edition of the Panigale V2 ditches the stock Showa and Sachs suspension system in favor of an Öhlins kit. The front is taken care of with the NX30 fork, while the rear is kept under control with the TTX36. Öhlins’ influence on this bike does not end here, as the Swedes also make the steering damper. Right next to that part, on the triple clamps, one can observe the production number of each bike. For maximum weight reduction, the special-edition Ducati Panigale V2 1st Championship 20th Anniversary comes with a lithium-ion battery, as well as a single-seater configuration. The saddle is sewn with contrasting red stitching, and the craftspeople at Ducati also embroidered Bayliss’ race number, 21, along with the Italian flag. Thanks to the lightweight components, the bike lost about three kilos (6,6 lbs.), adding up to 174.5 kilograms (385 lbs.) Seat height is 835 mm (32,9 inches), which may be tall for some, but being tall enough is just one of the things one must consider before buying a motorcycle in this segment. Ducati fans will also remark a set of sport grips, a titanium and carbon fiber exhaust system, and Troy Bayliss’ autograph on the fuel tank. The latter also reminds us of each of the three years when Bayliss won the championship title. The extras with the special edition of the Panigale V2 end here, but

Ducati Panigale V2 Bayliss 1st Championship 20th Anniversary Honors a Legend Read More »

Triumph Takes Racing World by Storm With All-New Motocross and Enduro Range

General Posts / By

Triumph is excited to announce that development is well under way on a comprehensive range of all-new competition Motocross and Enduro motorcycles. Joining our class leading and globally renowned motorcycle range this all new competition MX and Enduro family will bring all of Triumph’s engineering expertise to riders and racers worldwide. This will be accompanied by a landmark moment for Triumph and the MX and Enduro racing world with an all new Triumph factory race programme, and a commitment to top tier championship racing in both Motocross and Enduro series. Coming hand-in-hand with this commitment, to race and win at the highest level in the sport, Triumph is proud to announce that global Motocross legend Ricky Carmichael and five-times Enduro World Champion Iván Cervantes have joined the Triumph family as active partners in both bike testing and preparation for racing. An announcement of the timetable for the launch and reveal of the motorcycles, as well as the racing programme and the full story on the product advantages the new Triumph MX and Enduro offer, will follow in the coming months. “Today’s announcement marks the beginning of a new chapter for the Triumph brand, which everyone at Triumph is incredibly excited to be part of. We are 100% committed to making a long-lasting impact in this highly competitive and demanding world, with a single-minded ambition to deliver a winning motorcycle line-up for a whole new generation of Triumph riders” – Nick Bloor: CEO Triumph Motorcycles Ltd “I am thrilled to announce that I am joining the Triumph family and even more excited to be a part of their new endeavour into the off-road product category. This is an incredible opportunity for me to join this historic brand, and I am honoured and humbled to be a part of the development and

Triumph Takes Racing World by Storm With All-New Motocross and Enduro Range Read More »

Amazing hoard of vintage Harley-Davidson & Indian motorcycles and parts will be auctioned

General Posts / By

AUCTION ON Aug. 14th at Vermont State Fairgrounds, 175 S. Main St., Rutland, VT, 05701 It’s the single-owner lifetime collection of the late Robert “Bob” Bearor, a dedicated motorcycle enthusiast, and his wife Christine, who went by “Teenie”. Bob and Christine “Teenie” Bearor would ride to shows or just for fun on one of Bob’s Harley-Davidsons, often in matching outfits. The couple got married in a 1958 Corvette. Bob and Teenie always surrounded themselves with vintage cars and motorcycles, especially Harley-Davidsons, which the couple would ride to shows or just for fun, often in matching outfits.” — Yvette VanDerBrink (VanDerBrink Auctions) “Many of the motorcycle parts will be just for onsite bidders, so it’s best to attend the auction in person,” said Yvette VanDerBrink of VanDerBrink Auctions. RUTLAND, VT, UNITED STATES — The single-owner lifetime collection of Robert “Bob” Bearor – an incredible assemblage of Harley-Davidson and Indian motorcycles, parts and memorabilia dating as far back as 1908, to include rare and important barn find motorcycles that are finally seeing the light of day, plus vintage cars, midget race cars, antique tractors, chainsaws, vintage fishing lures and more – will all come up for bid on Saturday, August 14th at the Vermont State Fairgrounds in Rutland, from 10 am-6 pm Eastern time, by VanDerBrink Auctions, based in Hardwick, Minn. Mr. Bearor, who passed away in 2019, was a dedicated car and motorcycle enthusiast and a self-described wild-man who, along with his wife Christine, who went by “Teenie” because of her diminutive stature of just 4 feet 9 inches, always surrounded themselves with vintage cars and motorcycles, especially Harley-Davidsons, which the couple would ride to shows or just for fun, often in matching outfits. The two got married in a 1958 Corvette. Teenie survives her husband. Along the way, Bob befriended

Amazing hoard of vintage Harley-Davidson & Indian motorcycles and parts will be auctioned Read More »

Tucker Powersports Launches New Product Collection

General Posts / By

Tucker Powersports Launches New Product Collection for Snowmobile Owners and Winter Sports Fans New Collection Includes Broad Range of Products to Support Snowmobile and UTV Owners Through Local Dealers https://www.tucker.com/ Fort Worth TX – July 12, 2021 – Tucker Powersports today announced the launch of the Tucker Snow product line, which offers apparel, accessories, vehicle parts, tools and snow sports equipment to Tucker dealers. This product collection marks Tucker’s return to the distribution of winter sports products and the parts and accessories needed to repair and maintain snowmobiles. Over 1200 of Tucker’s current dealer customers sell snowmobiles, UTV’s and other winter powersports products. The new program from Tucker help dealers expand their offerings to include winter apparel, snow helmets, replacement parts, lubricants, trailering needs and thousands of suspension, engine and drivetrain components for both competition and casual winter sports. In addition, the product line includes snowshoes, toboggans, sleds and other items for non-powered winter fun. A significant portion of the Tucker Snow catalog is dedicated to a large selection of parts and service items for hundreds of models of snowmobiles from Artic Cat, Polaris, Ski-Doo and Yamaha. The offering includes both OEM replacement parts and performance upgrades. Notable brands that are included in the catalog and are new to Tucker are Motorfist, Woody’s, CA Pro Skis, Zox Snow Helmets, Sportstuff and Yukon Charlie’s. The other brands in the Tucker Snow collection are familiar to Tucker dealers, including 100%, Quantum, Motion Pro, NGK, Cruz Tools and Yuasa Battery. The 2021 Tucker Snow catalog was shared digitally with Tucker dealers today. About Tucker Powersports: https://www.tucker.com/ Featuring the most powerful portfolio of parts, accessories and apparel brands in the powersports industry, Tucker distributes top brands and offers its own brands, including Answer, Biker’s Choice, BikeMaster, Bully Locks, CoverMax, DragonFire Racing, FirstGear, ProTaper/ProTaper Sport,

Tucker Powersports Launches New Product Collection Read More »

The 8 Motorcycles Reproduced with Insane Realism in RiMS Racing

General Posts / By

by Bogdan Popa from https://www.autoevolution.com RiMS Racing is one of the most anticipated game releases of the year for moto racing fans, especially as Nacon and RaceWard Studio have promised to accurately reproduce the fastest bikes out there in this new title. So in theory, RiMS Racing is supposed to feel stunningly real from one end to another, and based on a new video published by the two companies, it looks like this is very likely to happen. Nacon has published gaming footage recorded on the Suzuka circuit in Japan, allowing us to see how the 2019 Kawasaki Ninja ZX-10RR behaves on the track. And at the same time, the video also reveals other tidbits about the game, including the customization screen where you can change nearly every little detail about the motorcycle you’re about to hop on for the next race. And last but not least, Nacon has also shared the list of eight motorcycles that will be available in the game: the Kawasaki Ninja ZX-10 RR, Aprilia RSV4 1100 Factory, BMW M 1000 RR, Ducati Panigale V4 R, Honda CBR1000RR ABS, MV Agusta F4 RC, Suzuki GSX-R1000R and the Yamaha YZF-R1. As we said earlier, every single model comes with insane realism, and you can figure this out by simply checking out the video we embedded below. It’s pretty clear Nacon and RaceWard struggled to make the whole experience feel as real as possible, and you can almost feel the feedback the Kawasaki gives by simply looking at the video. RiMS Racing will include over 70 events, and Nacon says it’ll roll out lots of multiplayer challenges after the game finally becomes available this summer. And speaking of launch date, RiMS Racing is projected to see the daylight on August 19 on pretty much every gaming platform out

The 8 Motorcycles Reproduced with Insane Realism in RiMS Racing Read More »

First Bagger Racing League Race Goes to Harley-Davidson by a Tiny Margin

General Posts / By

by Daniel Patrascu from https://www.autoevolution.com On June 27, the inaugural Bagger Racing League (BRL) event took place at the Utah Motorsports Campus in Grantsville. Like in the other series, King of the Baggers, this one was a battle between Harley-Davidson and Indian machines and riders. Unlike King of the Baggers, where riders go after each other in a single race, BRL comprises five classes: Hooligan GP, Big Twin GP, Stunt GP, Premier Class Bagger GP, and Pro Stock Bagger. The eyes of the people on-site for the event were, of course, affixed on the last two classes, which allow entry of proper bagger motorcycles, equipped with a fairing and bags. It is here where the most fierce battles were fought and won. The Premier Bagger class race, which was the main event, went to rider Michael Barnes with Hoban Brothers Racing/DTF Performance Harley-Davidson. He rode a race-prepped Road Glide to the win, ending the race just 0.356 seconds ahead of S&S/Indian Motorcycles’ Tyler O’Hara—both riders take part in King of the Baggers as well, but there Barnes seems not to manage things as well as he did this past weekend. It’s worth mentioning Harley led the field for the entire 8-lap duration of the race, despite the fact the Indian trailed at times inches behind. In the BRL race, O’Hara was the only one on the back of an Indian to compete the race, with all the other eight riders chasing the win on the backs of Harleys. Below you can find the Premier Bagger class race results in the inaugural Bagger Racing League race in Utah. 1. Michael Barnes (Hoban Brothers Racing/DTF Performance Harley-Davidson) 2. Tyler O’Hara (S&S Indian) 3. Cory West (Saddlemen Racing/Slyfox Harley-Davidson) 4. Ben Bostrom (Feuling Parts Harley-Davidson) 5. Jake Johnson (Alloy Art Harley-Davidson) 6. Shane

First Bagger Racing League Race Goes to Harley-Davidson by a Tiny Margin Read More »

Pirelli takes Top Two Positions in Bagger Racing League at Utah Motorsports

General Posts / By

Michael Barnes narrowly edged out Tyler O’Hara for the victory by 0.3 of a second. ERDA, Utah (June 30, 2021) – Pirelli Tire North America showed its commitment to racing across all spectrums by dominating the competition in both the Bagger Racing League BAGGER GP Class and the PRO STOCK BAGGER Class at Utah Motorsports Complex on Sunday, June 27. Pirelli controlled the top two positions in BAGGER GP with Michael Barnes racing to victory aboard a Harley Davidson and Indian Motorcycle rider Tyler O’Hara finishing a close second. Both Barnes and O’Hara relied on the performance of Pirelli’s DIABLO Superbike range. In PRO STOCK BAGGER, Benny Carlson rode his Sly Fox-backed Harley Davidson to the top step of the podium with Pirelli shod Oleg Pianykh taking second, also using the DIABLO Superbike Range of tires. Michael Barnes and Tyler O’Hara led the way with a Pirelli one-two finish in the Bagger GP class. “The weekend off started really good and I was able to get pole position,” said Barnes. “I was fast right out of the gate and the switch over to the DIABLO Superbike SCX rear helped us find even more speed on the racetrack. It got hotter heading into the main race, but it seemed to help the tire become even more consistent and proved to be no issue. Along with Oscar’s [Solis] help, we continued to make improvements all weekend long and did a lot of little fine-tuning with air pressure. It was an incredible weekend!” Barnes, who was able to control the pace out front, used a 125/70-17 DIABLO Superbike SC1 front tire paired with a 200/65-17 DIABLO Superbike SCX rear. O’Hara opted for a 120/70-17 DIABLO Superbike SC2 front and a 190/60-17 DIABLO Superbike SCX rear to keep the pressure on Barnes for the

Pirelli takes Top Two Positions in Bagger Racing League at Utah Motorsports Read More »

Scroll to Top