Hey,

I can tell the holidays are toast and the biker world is in full swing once more. Dealer show plans are flying. Daytona schedules are growing. We’re clearing the lifts for our Bonneville efforts and half the country is praying for good riding weather.

I’m going to jump right into the news. It’s packed and will take me beyond happy hour to complete. Then I need to adjust the valves on the Shovelhead, fire her to life and clear the lift. We’re going to Bonneville and the teams are growing. I need to mock up my CCI V-Bike chassis designed by John Reed for the 120-inch Panhead engine from Accurate Engineering and the 6-speed performance tranny from Baker. We’re rocking.

Let’s hit the news and I’ll show you what we screwed up this week and our first Bikernet Build-off bike:

TATTOO OF THE WEEK–Maybe the month. We don’t know. We haven’t even looked at the other entries. Quick send us something better. The winner gets a Bikernet T-shirt. Beat this one, sucka. Send your entry as a jpg image to Bandit@bikernet.com.

This one came from Russell Roberts.

SPIRIT BELLS FROM BIKERNET–I got the Spirit Bell. Looks very cool. Thanks, man! I hung it under the triple tree on my twinkie. I haven’t had any real problems yet with the bike, but it’s getting to the age where it’s gonna start giving me problems. Any good mojo will help!

I got laid the next night and the biker ran better than ever. That damn bell works..

Ride it like you’re on a test ride (Gotta figure out how to shorten that one up).

Peace, brother!

–Hiway

You can order a Bikernet Spirit Bell from the Bikernet Black Market below.

BIKER INTERNET RADIO–Get Ready Inner Circle Radio Show Saturday-February 11, 2006.Support Your Local BikersTAKE A LOOK AT THE SITE http://www.big7productions.com

Sponsored By ACCURATE ENGINEERING

FLORIDA DROPS HELMET PROPOSAL–TALLAHASSEE — Ride on.Florida highway-safety officials have dropped a proposal that would have made it harder for motorcyclists to thunder down the roads without wearing helmets.The proposal, which surfaced in September after a federal report showed increasing motorcycle deaths in Florida, would have required bikers to carry $50,000 in health insurance if they wanted to leave their lids at home. Current law requires only $10,000 in insurance coverage.

But after learning that the insurance policies could be hard to find and costly — and after getting a cool reception from Gov. Jeb Bush and the state Cabinet — the Department of Highway Safety and Motor Vehicles scrapped the idea.

“We checked around,” said Fred Dickinson, the department’s executive director. “There ain’t a whole lot of business (motorcycle health insurance policies) being written.”

The department’s decision became apparent Tuesday as a state House committee reviewed a proposed highway-safety bill for the upcoming legislative session.

— By JIM SAUNDERS,Tallahassee Bureau Chief

–from Rogue
Motorcycle Hall Of Fame Member 2005

ITALIAN AMERICAN HOG CHAPTER–The Aviano HOG Chapter is a unique chapter located in the Friuli Region of Northern Italy. We’re the only all American HOG Chapter in Europe and comprised almost exclusively of U.S. military personnel. Additionally, we’re the only chapter in the world to operate under a sponsoring director and not under a sponsoring dealership as authorized by H-D and HOG. We will be conducting our annual “Blessing of the Bikes” in March 2006.

Historically, we’ve had approximately 150-200 people, both Italian and American present at this local event. We start off at a beautiful church nestled in the Italian Alps where we conduct a benediction in both Italian and English followed by a procession down to the small town of Aviano. When we arrive at the Western House Restaurant, the street is blocked off for motorcycles only and the festivities begin.

The Chapter provides free pizza and entertainment to all that attend. Our main event is a raffle which is normally odds and ends donated from the chapter membership. In the end a fun safe time is had by all.

Here in Italy, the Euro dollar is becoming stronger and prices are rising. The chapter membership utilizes mail order companies and stateside vendors such as you for all of its parts and accessory purchases. This is how you have been identified. We are requesting donations of prizes for the “Blessing of the Bikes” raffle. These donations would help to support this event and make it even betterAny items that you may choose donate will be greatly appreciated. Donations may only be shipped via US Postal Service to our Chapter Address:

Aviano H.O.G. Chapter 9239
c/o Wayne R. Parks
PSC 54 Box 994
APO, AE 09601

Any questions or concerns can be addressed to me at wayne.parks@aviano.af.mil

–WAYNE R. PARKS
Sponsor/Director

PENNSYLVANIA CHANGE MOTORCYCLE PERMIT PROCEDURES–HARRISBURG, Pa. – Under a policy that starts Monday, motorcycle riders will have to pass a knowledge test before they can receive their learner’s permit.The learner’s permit previously had been issued before the knowledge test was given.

“We want to make sure that anyone learning to drive a motorcycle has the essential knowledge and understanding before riding on the open road,” said Allen D. Biehler, state transportation secretary.

Applicants must complete a motorcycle learner’s permit application and pay required fees. But now they will take the knowledge test immediately after returning the application. PennDOT will issue a motorcycle learner’s permit if the applicant passes the test.Motorcycle learner’s permits issued before Monday will not be affected by the change

–from Rogue

STURGIS MOTORCYCLE MUSEUM 2006 RAFFLE ANNOUNCED– January 2006 – – The Sturgis Motorcycle Museum & Hall of Fame is excited to announce that tickets are now available for the 2006 raffle.

Since the Museum opened in 2001 we have been extremely fortunate to have the support of many notable industry leaders, and we’d like to add each of you to that list. Our annual raffle is our major push each year to gather substantial funding for the Museum. With the purchase of a raffle ticket you will be helping us to continue our mission, “to preserve the great history of motorcycling and to honor the men and women who have made a positive and significant impact on our sport and lifestyle”.

2006 Raffle Prizes are:

2006 Harley-Davidson FLHX Street GlideDonated by Sturgis Harley-Davidson & Black Hills Harley-Davidson

Henry 44-40 Rifle2006 Edition, One of a Kind Commemorative

Scott Jacobs “Pushing the Limit” framed Limited Edition printDonated by Scott Jacobs-Signed, Numbered and DedicatedSigned by Andrew Hines (racer depicted in the painting)

There are three chances to win on one ticket. The Museum begins by drawing for the incredible Scott Jacobs print, signed by both the artist and Andrew Hines, the racer depicted in the painting. The winning ticket stub will be thrown back in with the remaining stubs and we draw for the Henry rifle, a beautifully engraved replica and a favorite each year. The winning stub is once again put back in with the remaining stubs for the final spin and drawing of Harley’s exciting new FLHX Street Glide. One ticket, three chances to win! Plus you’ll have the satisfaction of knowing you’ve invested in motorcyclings past, and its future.

Each raffle ticket costs $10.00 and you do not need to be present to win. The drawing will be held on the final day of the Sturgis Motorcycle Rally, Saturday 12 August 2006, at the Sturgis Motorcycle Museum on the corner of legendary Main Street and Junction Avenue in downtown Sturgis.

Tickets can be purchased on line by visiting our web site http://www.sturgismuseum.com mailing a check or money order to the Sturgis Motorcycle Museum & Hall of Fame, 999 Main Street, Sturgis SD 57785; or by telephone with a credit card 605.347.2001.

SPECIAL OPERATIONS WARRIOR FOUNDATION DISCOVERED– http://www.specialops.orgHelp the warriors help the children of fallen warriors. It’s simple. A place to go to help fallen soldiers.

THE WRENCH’S OPTIMIST CODE–
Law of Mechanical Repair: After your hands become coated with grease your nose will begin to itch or you’ll have to pee.

Law of the Workshop: Any tool, when dropped, will roll to the least accessible corner.

Law of probability: The probability of being watched is directly proportional to the stupidity of your act.

Law of the Telephone: When you dial a wrong number, you never get a busy signal.

Law of the Alibi: If you tell the boss you were late for work because you had a flat tire, the very next morning you will have a flat tire.

Variation Law: If you change lines (or traffic lanes), the one you were in will start to move faster than the one you are in now. (works every time)

Bath Theorem: When the body is fully immersed in water, the telephone rings.

Law of Close Encounters: The probability of meeting someone you know increases when you are with someone you don’t want to be seen with.

Law of the Result: When you try to prove to someone that a machine won’t work, it will.

Law of Biomechanics: The severity of the itch is inversely proportional to the reach.

Theatre Rule: At any event, the people whose seats are furthest fromthe aisle arrive last.

Law of Coffee: As soon as you sit down to a cup of hot coffee, your boss will ask you to do something which will last until the coffee is cold.

Murphy’s Law of Lockers: If there are only two people in a locker room, they will have adjacent lockers.

Law of Dirty Rugs/Carpets: The chances of an open-faced jelly sandwich of landing face down on a floor covering are directly correlated to the newness and cost of the carpet/rug.

Law of Location: No matter where you go, there you are.

Law of Logical Argument: Anything is possible if you don’t know what you are talking about.

Brown’s Law: If the shoe fits, it’s really ugly.

Oliver’s Law: A closed mouth gathers no feet.

Wilson’s Law:As soon as you find a product that you really like, they will stop making it.

–from Buckshot

FIREBALL ALERT ON BIKERNET?–On Sunday morning, Jan. 15th, between approximately 1:56 and 1:59 a.m. PST (0956 – 0959 UT), a brilliant fireball will streak over northern California and Nevada. It’s NASA’s Stardust capsule, returning to Earth with samples of dust from Comet Wild 2. Observers along the flight path should have a marvelous view of this rare man-made meteor. Radio signals reflected from the capsule’s ionized tail may be heard from a much wider area–hundreds to thousands of miles away. Visit http://spaceweather.com for maps and observing tips.

INTERNATIONAL SPACE STATION: The International Space Station is flying over the United States in mid-January during evening hours when it is easy to see. Would you like a phone call to alert you when the station is about to appear over your home town? Sign up for SpaceWeather PHONE: http://spaceweatherphone.com

The true civilization is where every man gives to every other every right that he claims for himself.

–from Robert Ingersoll

BIKERNET RELIGIOUS MOMENT–A biker is riding down the road and breaks down near a monastery.He goes to the monastery, knocks on the door, and says, “My scooterbroke down. Do you think I could stay the night?” The monksgraciously accept him, feed him dinner, and even fix his bike.As the man tries to fall asleep, he hears a strange sound.

The next morning, he asks the monks what the sound was, but theysay, “We can’t tell you. You’re not a monk.”

The man is disappointed but thanks them anyway and goes abouthis merry way. Some years later, the same man breaks down infront of the same monastery. The monks again accept him, feedhim, and even fix his bike. That night, he hears the samestrange noise that he had heard years earlier.

The nextmorning, he asks what it is, but the monks reply, “We can’t tellyou. You’re not a monk.”

The man says, “All right, all right. I’m dying to know. If theonly way I can find out what that sound was is to become a monk,how do I become a monk?” The monks reply, “You must travel theearth and tell us how many blades of grass there are and theexact number of sand pebbles. When you find these numbers, youwill become a monk.”

The man sets about his task. Some forty-five years later, hereturns and knocks on the door of the monastery. He says, “Ihave traveled the earth and have found what you have asked for.There are 145,236,284,232 blades of grass and231,281,219,999,129,382 sand pebbles on the earth. “

The monksreply, “Congratulations. You are now a monk. We shall now showyou the way to the sound.”

The monks lead the man to a wooden door, where the head monksays, “The sound is right behind that door.” The man reachesfor the knob, but the door is locked. He says, “Real funny.May I have the key?”

The monks give him the key, and he opensthe door. Behind the wooden door is another door made of stone.

The man demands the key to the stone door. The monks give himthe key, and he opens it, only to find a door made of ruby.He demands another key from the monks, who provide it. Behindthat door is another door, this one made of sapphire. So itwent until the man had gone through doors of emerald, silver,topaz and amethyst.

Finally, the monks say, “This is the last key to the last door.”

The man is relieved to no end. He unlocks the door, turns theknob, and behind that door he is amazed to find the source ofthat strange sound.

But I can’t tell you what it is.

You’re not a monk.

–from CarlR

Continued On Page 2

Continued From Page 3

FOR SALE WEST VOLUSIA’S PREMIER EVENT BAR–

3.3 +/- ACRES OF PARTY SPACE
U. S. HIGHWAY FRONTAGE
COVERED OUTDOOR PAVILLION
OUTDOOR COVERED STAGE
SRX LIQUOR LICENSE
FULL KITCHEN
AMPLE PARKING FOR BIKES AND CARS
INSIDE FIREPLACE
LARGE TANK BBQ SMOKER
TURN KEY OPERATION

This property and business may be purchased for $950,000 the seller will finance to qualified buyers.Call for details of the very attractive finance package.

This property has site approval from the county of Volusia for an additional structure and the impact fees have been paid in full to the county. The acreage involved in the purchase allows for addition to existing structure or the building of other free standing structures.

It is located in 5th fastest growing market in the nation, West Volusia County and has become a destination spot for the famous BikeWeek and Biketoberfest celebrations.

See the Google Search, Trader Jacks Deland

BIKER INTERNET RADIO COMING–We are making progress on the Motorcycle Radio Show called the Inner Circle. It is scheduled to air on January 14th 2006

You can find out more about it by checking the links below. I hope you will take the time to check it out and to also let your friends know about it.We will be looking for comments, constructive criticism, subjects you would like to hear about etc.Looking forward to a great 2006 and you sharing it with us.

Show Main Page http://www.big7productions.com

Rogue’s page http://www.big7productions.com/message6.htm

STEALTH NORTH CAROLINA SHOP REPORT–I hope everyone had a great New Year’s holiday! Here at STEALTH BIKE WORKS we are getting back in the groove.The holidays are over and we are looking forward to spring time already.

We keep moving along on our ground up projects. The ’71 shovel is taking shape. The ’78 shovel has been broken down and the frame and a few other parts are at the powder coaters. Our customer base is starting to form as we see repeat customers every week and that is a very good indication of how SBW is moving along. I think our customers like the atmosphere at SBW. No high pressure sales techniques. We want people to feel at home and relaxed while they are at SBW. It does not matter that they spend money each time. I what them to come in to talk bikes, after all that is what is SBW is really about bikes and bikers!

We have the Easyrider Bike Show here in Charlotte in Feburary, so we will be making arrrangements to be there. Events like this make the winter pass by a little quicker. The weather here has been great lately, temps near 60–65 degrees, so a lot of bikes have been on the road.

I was driving to SBW this morning I was thinking about as we get older we see and look at things so differently. You start to realize what is important in life, things like your family and friends, your health. For me I have also realized that money is not always the most important thing in life. Right now I may not make as much money as I used to but I am much happier and just maybe that is worth the trade off. There were also some events that took place this week that made realize too how lucky I am to have opened STEALTH BIKE WORKS and I realize that if it was not for one person pushing me to do it I may have never have done it. She knows who she is without mentioning any names.

So as you proceed into 2006 take stock of what is really important in your life and if you can let go of what is not. On the last day of your life I don’t think you will say “I wish I had just one more dollar,” for me it will be I wish I had one more ride! Even though it may be hard sometimes ENJOY LIFE!

Until next week, RIDE!
STEALTHMAN

MORE ON JANKLOW–Janklow’s history of abuse goes back many years. Indian women on the Pine Ridge S.D. reservation recall that when he was first starting out in politics as a young lawyer running for District Attorney, he was indicted by their tribal court for rape of a 15 year-old girl. His reply was that he didn’t recognize a tribal court’s authority and was elected to DA.

He then ran for other offices proclaiming himself an “Indian Fighter” and using abusive tactics against Indians for many years much to the delight of a prejudice voting block who continued to elect him to office. Unfortunately it finally took Bikers to bring him down but read on— you’ll find the following quite interesting about the character of this “public official”:

Janklow’s Indian AbusesOliver North lied to Congress and lost his bid for a Virginia seat in the US Senate. William “Wild Bill’ Janklow allegedly raped a young Lakota woman and was elected Governor of South Dakota.

On November 8, 1994, Bill Janklow defeated former Wesleyan University professor Jim Beddow by a 55%-41% margin, elevating him to the Governorship for the third time. He formerly served as the state’s top official from 1978-’82, and from 1986-’90.

Janklow began his career in the late 1960’s as head of the Rosebud Sioux Tribe’s legal services program. He built a reputation as an excellent poverty lawyer who had come to the aid of many destitute Rosebud residents.

AIM veteran Russell Means remembers Janklow as a “great guy,” who was humorous and fun to be with, but who didn’t like Indian people, and who gave up on Indian Law when he realized there was no future in it.

American Indian Movement leader Dennis Banks says he knew of Janklow as early as 1970 from talks with then-Rosebud Tribal Council President Robert Burnette. Burnette, a highly respected man among his people, told Banks that Janklow had raped a fifteen-year-old Rosebud girl named Jancita Eagle Deer. Eagle Deer, ashamed when the horrible story spread, fled the reservation and disappeared. Janklow refused to face the charges in Rosebud tribal court and was hence barred from practicing law on the reservation.His eyes set on state politics, Janklow fancied himself an “Indian Fighter”-in the tradition of George Armstrong Custer-who left the reservation and became an assistant prosecutor for the South Dakota state Attorney General’s office. Jancita Eagle Deer had disappeared, but the rape charge wasn’t going to.

In 1974, Janklow prosecuted and jailed Sarah Bad Heart Bull, a Lakota woman whose son, Wesley, had been stabbed in the heart at a Buffalo Gap bar by a white businessman named Darold Schmidt. Despite witness accounts that Schmidt said he was “going to kill him an Indian,” he was charged only with involuntary manslaughter.

–from Rogue

VIPER MOTORCYCLE COMPANY ANNOUNCES ACQUISITION OF MANUFACTURING FACILITY AND 2006 PRODUCT LINE WITH PROPRIETARY VIPER ENGINES– New Hope, MN – January 5, 2006 – (Pink Sheets: VPWS) – Viper Powersports has entered into a binding agreement to purchase a 32,000 sq. ft. manufacturing facility on 4 acres located in Monticello, MN. The facility meets Viper’s current manufacturing needs and is zoned for expansion as Viper continues to expand and grow.

Viper Motorcycle Company will introduce its second model, the Diablo Power Cruiser (PC) at the V-Twin Expo by Easyriders in Cincinnati on February 4th – 6th. Viper will also introduce its own line of proprietary engines ranging from 115 to 152 cubic inches.

“This is a very exciting time for us,” states Terry Nesbitt, President Viper Motorcycle Company. “We are introducing the Diablo PC and our own line of proprietary engines. With the help of GE Financing and the best dealer programs in the industry, 2006 promises to be an exciting year for Viper Motorcycle Company.”

“Motorcycle consumers and the general public have been deluged with kit bikes and custom cycles. The media has saturated the public with the sexiness of this type of bike. Viper feels the need to call out the quality, ridablity and performance of a manufactured product verses a kit bike,” states Nesbitt.

“With the introduction of our own engines, Viper joins Harley Davidson and Victory as the only true OEM’s in the cruiser segment,” comments Nesbitt. “The Viper engine is an all billet construction, big bore/short stroke that develops incredible power while offering a smooth ride. In addition, with the Viper patented technology, our engines produce 30% less heat than the competitive air-cooled v-twin which greatly enhances overall reliability.”

According to Nesbitt, “The Diablo PC joins the already successful Diablo for 2006. The PC is a long and low variation of the Diablo with a 21 inch front wheel and a 38 degree rake. A third model will join the product line for 2006 and all will be available with different engines. Our dealer network is growing, and we continue to build value in the Viper brand.”

Viper Motorcycle Company designs and manufactures custom motorcycles, accessories, and motorcycle engine component parts with patented technology using Computer Aided Design (CAD). Many of the motorcycle and motorcycle engine component parts are machined from solid billets of aluminum utilizing Computer-Numerical-Control (CNC) machines. Visit the Viper website at http://www.vipermotorcycle.com.

NEW FROM AEROMACH – Cruisin’ Pegs for HD Models– Put an end to the strain of having to reach highway pegs mounted to engine guards. And Cruise with your feet up, without sacrificing comfort and control over your bike.

The Cruisin’ Pegs are CNC machined from 6061-T6 billet aluminum, chrome plated and designed to mount to the underside of the OEM floorboards. Works with or without the factory crash bar! You get all the needed stainless steel hardware, 2 steel plates for added strength easy to follow pictorial instructions.

4 Great designs: Tribal, Flame, Solid and Ballnose.

Models they fit: Harley Davidon Softail, Road King and Road Glide models with traditional shape footboards. Indian Chief footboards. Now also available for the Harley Davidson Swept Wing shape footboards.

Will work with Lindby Bars. Will NOT work with aftermarket footboards.

The solution for long legs and short legs!

How they work: A pivot pin feature allows for three positions:
1. Up Close (for riders 5’6″ – 5’10”)
2. Middle (for riders 5’11” – 6’1″)
3. Way Out (for riders 6’2″ – 6′ 4″)

Installation is easy: Remove the rubber inserts from the footboard and lay the template onto the exposed floorboard. Using a sharpie pen, draw two circles where the board is to be drilled. Remove the template and drill with a 13/32 bit. Place the Cruisin? peg assembly under the footboard and drop the installation bolts from the topside, through the footboard, through the Cruisin? peg and secure with the two split washers & nylock nuts. Replace the rubber pads and go for a ride. Install time is approximately 45 min.

Contact:
Aeromach Mfg Inc.
www.aeromachmfg.com
800 990-9392
619 258-5443
Jeff Schwen
Tech and Designwww.aeromach.net
look for us at Easyriders-Pomona, CA. Jan 7 – 8th

THE BLUE FLAME–This is Mike from OZ Motorcycle, good job with all the stuff your doing. If you know, the stretched blue bike, with the cool chick driving it, in some mag. ads you used to run? Do you know the leg and top tube stretch, and how long the forks are, also is that 1″ or 1an 1/8″ tubing? My welder/ fab guy wants to build one just like it with a blower (early jerry maguerson style (we have one) Shovelhead, we can and do build old school frames like that one, in 1-inch or 1 an 1/8. Any help with that info would be great. I’m going to send you some photos of my “old school (real deal) shovel choppers, it’s got a (REAL ONE) D&D ( before Paughco took them over) rigid frame, 15-inch over durfee girder, 15” american “mag” rear wheel, superspoke, 5 spoke daul disc ( 8″ rotors), “totally” chromed & polished motor and trans., on & on…, I’ll sent the pics, by the way it’s for sale.

Photos were taken in the late 70’s, early 80’s for “Easyriders”, but the photo guy took too many of my girlfriend, and never gave me any of the pictures, true story, as they say, “you can look it up”.

Mike c/o OZMC

Terrific thing about the internet-archives. The Blue flame was built about 4 years ago. All the articles and specs are still in the Tech area. Check it out. Look forward to the shots of your bikes. –Bandit

I’M INNOCENT-I swear. Watch for several features to hit the pages of Bikernet in the very near future. We have our V-Rod, Night-Rod Road test ready to rock. Then there’s a feature on one of Branscomb Richmond’s 1902 Customs, the Renegade. Check the new fiction by Chuck Riddle, my S&S head install tech, and the rundown on Axiom Motorcycle Parts, a new Bikernet Sponsor.

That’s not all. We have a hot feature on the Ghetto Blaster Sportster custom from Departure Bike Works. There a story about a 82-year old outlaw from Hawaii and a tech on customizing shotguns by Larry Crowe for the ultimate home security device.

John Gilbert and Jason Douglas, the digitalgangster, are burning the midnight oil to launch the Girls of Bikernet in March. Hang on for that one. If you want to contribute photos, be a model or have your bike featured drop JohnGilbert@bikernet.com a line.

I need to hit the iron pile, the showers, the phone (to return calls), the computer to edit stories, the bike lifts to wrench bikes, the liquor store for more whiskey and the Wilmington house of ill repute for another babe. Busy afternoon.

Ride Forever,

–Bandit

Continued From Page 2

BEVERLY HILLS CHOPPERS UNVEILS $250,000 SWAROVSKI CRYSTAL-INCRUSTED ‘PARIS HILTON BIKE’– BEVERLY HILLS, CA – Beset with more than 100,000 Swarovski crystals, Beverly Hills Choppers announces the completion of the most unbelievable custom chopper ever fabricated. After 6 months of fabrication and embellished with countless crystals by hand, the bike was finally given to the pop icon and self proclaimed “original Beverly Hills Angel,” Paris Hilton.

This bike has been so anticipated by the press, that the paparazzi have stopped at nothing to try and get a picture of the bike before it’s unveiling. One resourceful picture bandit climbed five stories to the top of co-founder and alleged mafia figure, Johnny Lew Fratto’s, penthouse apartment in Beverly Hills where the bike was being stored. Caught red handed unwrapping the finished midi from its protective plastic covering, he was thrown out before he could get the “money shot.” The bike was promptly moved to an undisclosed and secure indoor location.

In addition to the crystals, which also spell out the name Paris on the tank, the bike sports a custom pink paint job and pin striping from renowned pinstriper, Bob Iverson. The pint sized powerhouse has a 6 horsepower, 2-stroke, fully automatic Tecumseh engine with electric start and can reach speeds up to 70 miles an hour without having to shift. The engine is fully chromed and includes custom modified exhaust that is sure to turn heads, if Paris doesn’t already. Other custom features that make this bike unique include an Ipod dock, a custom Tom-Tom navigation system that says “that’s hot” in Paris’s voice upon start up and a gas cap that doubles as a compact mirror.

No motorcycle would be complete without the proper rider decked out in the right gear. Ever the fashion plate, Paris will also be presented with matching Swarovski crystal covered riding shoes, helmet and a Beverly Hills Angels jacket created by rockstar designer Eric “G-Man” Gottesman.

Beverly Hills Choppers is a division of Fratto-Beich Productions; an entertainment production and brand creation company owned by Johnny Fratto and Wally Beich currently in development of a television series called “Son of a Gun.” A perfect mix of “Curb Your Enthusiasm” and “The Sopranos,” the series follows the day-to-day happenings of the company’s co-founder, Johnny Lew Fratto (a real life Chili Palmer), the son of a Midwest Mafia boss in Al Capone’s notorious Midwest army.

Through its demi-reality format, The Beverly Hills Choppers crew takes the viewer through a hilarious series of events that involve reputed gangsters, the Hollywood elite and well known business moguls. Be sure that the Choppers and Beverly Hills Angels apparel, which recently entered into a licensing deal with clothing manufacturer Larry Levine and Impulsewear, will have a starring role in this series.

–from Crazy Horse
(from Create Magazine)

CHOP N GRIND RACE TEAM AT HIGH DESERT PERFORMANCE SUPPORTS BIKERNET.COM–Sorta. Ever since last week’s Bonneville announcements, including the Sand-snorting bastards in the desert there has been a flurry of treacherous activity in the desert. Rumor has it that guns are loaded, the nitrous bottles filled and meetings set.

On the agenda for the next Chop N Grind board of directors meeting, an ominous item tops the list bringing Bandit up for a vote. “After some of his comments I believe he should be thrown out of the Bikernet Bonneville Racing Association,” said Sammy Scorpion of the one-week-old association of Bikernet Bonneville racing teams. Currently there’s three teams: Chop N Grind in 32 Palms, California; Custom Performance in Phoenix and the Salt Shakers in Los Angeles in Conjunction with Departure Bike Works in Richmond, Virginia, Accurate Engineering, Baker Transmissions and Custom Chrome.

We’ll bring you more reports as the dust settles or bullets fly.

–Bob T

RALLY IN THE ROCKIES ROCKS AGAIN–Hope all had Happy Holidays and we here at the Four Corners Rally in the Rockies wish all a great New Year.

This year as you are making plans to attend some National Motorcycle Rallies, please keep us in mind. This is the 15th year the Four Corners has hosted a motorcycle rally and last year we had around 100,000 come to our area from almost every state in the US, plus bikers from Canada and Mexico

The press always labels our event as one of the “must do events of the year” calling it one of the best parties anywhere.

This year we will be adding more events and bigger names at our concerts, along with our favorite events. Biker Bull Riding, Pineapple Pit Wrestling, Biker Rodeo, $5,000 Cruising for Cash and our large Beer Garden will all be back.

We are aware that with gas being so high and with more and more rallies, bikers must make a choice as to where to go and what to see. Why not come to the best party in the West with the best concerts, and the very best in riding anywhere in the US? Our daily lineup of activities is worth every penny. Tickets and camping are now on sale, and we will no doubt sell out several concerts. Rooms and camping were sold out last year so get your rooms and camping spots early.

For more details and updates check out our official website at: www.rallyintherockies.com

BIKERNET INTERNATIONAL ECONOMICS LESSON–Joe Smith started the day early having set his alarmclock (MADE IN JAPAN) for 6am. While his coffee pot(MADE IN CHINA) was perking, he shaved with hiselectric razor (MADE IN HONG KONG). He put on a dressshirt (MADE IN SRI LANKA), designer jeans (MADE INSINGAPORE) and tennis shoes (MADE IN KOREA). Aftercooking his breakfast in his new electric skillet(MADE IN INDIA) he sat down with his calculator (MADEIN MEXICO) to see how much he could spend today. Aftersetting his watch (MADE IN TAIWAN) to the radio (MADEIN INDIA) he got in his car (MADE IN GERMANY) (filledit with GAS from Saudi Arabia) and continued hissearch for a good paying AMERICAN JOB.

At the end ofyet another discouraging and fruitless day checkinghis Computer (Made In Malaysia), Joe decided to relaxfor a while. He put on his sandals (MADE IN BRAZIL)poured himself a glass of wine (MADE IN FRANCE) andturned on his TV (MADE IN INDONESIA), and thenwondered why he can’t find a good paying jobin AMERICA . . .

1924 CLASSIC, MASSIVE, AMAZING, PANORAMIC CLUB PORTRIATS–5 feet long. Taken straight from negatives found in grandmas safety deposit box, these 5-foot long historic portriats feature the nearly finished Pismo Beach pier south of San Francisco. Everyone from the Golden Gate MC to Oakland boys are there. This 10 x 60-inch panoramic view of the 1924 W.F.M. Rally is printed on the finest vintage style archival paper, and delivered to you unframed.

Price Includes ship and handling: $90.

1929 Historical Motorcycle Club Photograph

Unbelievable. This shot was taken only a few short years later on the same beach and shows the finished pier from the other side. All club banners were held high in this 8×42-inch (3.5 feet) panoramic view of the 1929 W.F.M Rally. It’s also printed on the finest archival paper.

Price Includes ship And Handling: $55..
To The Black Market

The Bikernet Deal is for both panoramic shots delivered, quickly, unframed for only $125. Sorry we can’t break a set, but you won’t be disappointed. You can make out every club logo, a classic Valvoline banner, a bi-plane parked at the edge of the sea. The bros were partying and one is passed out in the sand. You can make out hairstyles, the attire of the era and the makes and models of the bikes. We feel very fortunate to be able to offer these wild classics in the Bikernet Black Market.

BIKERNET CHILDRENS TALE–Little Red Riding Hood is skipping down the road when she sees the Big Bad Wolf crouched down behind a log.

“My what big eyes you have, Mr. Wolf,” says Little Red Riding Hood.

The surprised wolf jumps up and runs away. Further down the road Little Red Riding Hood sees the wolf again, this time he is crouched behind a tree stump.

“My what big ears you have Mr. Wolf,” says Little Red Riding Hood.

Again the foiled wolf jumps up and runs away. About 2 miles down the road, Little Red Riding Hood sees the wolf again, this time crouched down behind a road sign. “My what big teeth you have Mr. Wolf,” taunts Little Red Riding Hood.

With that the Big Bad Wolf jumps up and screams, ” For Chrissakes!! Will you get lost?! I’m trying to take a dump!”

–from Jester

PONCE INLET POLICE CHIEF INJURED IN MOTORCYCLE CRASH–This old lady is in trouble. Will try to monitor this if it stays in the news. You can guarantee she will be charged with more than if it was you or I, But maybe it will set a president.

— ROGUE

By SETH ROBBINS,Staff Writer

DAYTONA BEACH — Ponce Inlet’s police chief was injured in a traffic accident Sunday afternoon on Ridgewood Avenue when his motorcycle collided with a sedan at the Beville Road intersection, authorities said.Chief Steven R. Thomas, 51, was riding north on South Ridgewood Avenue shortly after 12:30 p.m. when the crash occurred, said Sgt. Al Tolley, Daytona Beach police spokesman.

Police said that according to witnesses, Lucille Bussiere Anderson, 82, of Port Orange, who was headed east on Beville Road, failed to stop at a red light. But Anderson said later she was stopped and watched the light turn green before proceeding into the intersection.

Ejected from the bike, Thomas hit the hood of the sedan and landed on the roadway. After driving onto the sidewalk, the sedan struck two signs before coming to stop on the east side of South Ridgewood Avenue.

EVAC ambulance took Thomas, who may have suffered a broken leg, to Halifax Medical Center where he was listed in stable condition later. He was not wearing a helmet.Anderson, who was not injured, was listed as the driver at fault due to a violation of right of way, Tolley said.

Anderson denied that she was at fault. In a phone interview late Sunday, she said, “I never went through a red light. The other cars were crossing so I went with the flow.”Tolley said charges are pending. Police detoured traffic off Ridgewood Avenue until the accident scene was cleared.

TEXAS SCOOTER TIMES EVENTS–If you attend TST Motorcycle Shows and Swap Meets, you have enjoyed themusic of Mad Max and the Max Attack. Our ole buddy Max was hospitalized acouple of times in the last few months and has required massive bloodtransfusions. Scooter Times is working with Carter Blood Care to set up a blooddrive for Max to help with the cost of the blood. Carter Blood Care is bringingout their ” Bloodmobile” to take donations at the Dallas Chopper Show and SwapMeet on Sunday, January 8, at the Longhorn Ballroom in Downtown Dallas.They are scheduling donors from 10:30 a.m. to 4:00 p.m. The actual timerequired for the several steps of the donation process may require from 45minutes to 1 hour.

You can fill out their online form from the link below. Therewill also be a sign up sheet at the front gate of the swap meet.Here is the deal…. If ya give MAX some blood… We’re gonna let ya into theChopper Show for FREE!

So, roll up your sleeves for a good buddy!!!! We?ll see ya there.Check out www.texasscooter.com for more info.

BIKERNET REPORTER EMBEDDED IN DAKAR–Aussie Andy Coldecott won yesterdays stage over the whole field. Started in 25th place, overtook all bikes in front and came in 3 minutes ahead of everyone else.

Simon Pavey and Charley Boorman came up 20 postions to finish day’s stage at 154 mark.

The guy I met at bike show recently, Chris Barrire Varju went from an unbelivable 163 postion to 62.

The V-Rod guys, Scott and Duane are at the rear of the bike field and had some problem that kept them motionless for almost two hours. I was watching on the live postion feed at www.dakar.com They later went forward again and have yet to reach stage finish.

If you have broadband dial up you can pay 14 bucks usa and watch the race live on your computer 24/7 from now until it finishes by the way.It’s at the Raid Live . com site

The USA KTM guys , one is in tenth postion.

This is early stages of race, just arrived in Africa, guys will crash and have mech probs, so it’s always worth knowing that quite possibly none of these guys will be in anything like the same postion in a few days time.

The Hummer truck (USA) is in tenth place and the guy on the russian Ural seems to have stopped or disappeared completely.

That’s it from Jaq, Bikernet Paris(Lisbon) Dakar Reporter.Adieu (as us French say!)

HARLEY DEALERSHIPS RATED–Hey Bandit, I was scanning the net last month and cameacross a site or page that rates the H-D dealerships.The riders would bitch, complain or complement abouttheir experiences with the dealerships.

Well, I havebeen looking around the net for it and can no longerfind it, for a friend. Thought maybe it was on Bikernetor you knew what I was talking about and give me ahand,

–Roger
Houston,Tx

BUILDING THE ULTIMATE TACTICAL 870 SHOTGUN FOR HOME SECURITY–Turn your hundred dollar gun show special competition worthy weapon.

With over 6 million Remington standard 12-gauge shotguns sold since it?s inception in1949, they?re a natural security device. Many different products willenhance the users experience, in particular, accuracy. We?re working closely with Larry Crow of Competitive Gun Works. He has developed felt recoils, grip an trigger pulls, magazine capacity enhancers and even combat light options. In this program, master gunsmith Larry Crow details and installs all of the latest accessories you can add to your 870 shotgun to make it perform outstanding.

We?re going to sell Larry?s DVDs on how to rebuild your shotgun for less recoil and more accuracy. If there?s interest, Larry will customize a line of Shotguns called the Bandit, that we will sell on Bikernet.

.
To The Black Market

CHARITY BIKE BUILD 2006–South Side Kustoms and Club Diablo (www.clubdiablo.com) are proud to sponsor CHARITY BIKE BUILD 2006.

Bike will be raffled off at end of summer 2006 at Club Diablo. All proceeds will benefit The Western New York Food Bank and The Make A Wish Foundation ? of WNY (http://westny.wish.org).

Western New York Food Bank (www.foodbankwny.org) has been a big contributor of hurricane relief as well as a staple in the Western New York Area.

If you would like to be a part of this spectacular event by contributing motorcycle parts and/or funds for this build. Please contact one of the following.

Jason – South Side Kustoms email =
southsidekustoms@adelphia.net
Jesse – Club Diablo email = info@clubdiablo.com
Lori Stachowiak- Western New York Food Bank email =
lstachowiak@foodbankwny.org
Leslie Lewis – Make a Wish Foundation of WNY =
l_lewis@westny.wish.org

Continued On Page 4

Hey,

It’s a new year, our 10th year, a year of progress, building race bikes and launching the Girls of Bikernet. I’m running around the shop, like a meth cooker who slipped and fell in a vat.

Our first move is to clear off our two lifts and make space for the new builds. First, I need to finish my grandson’s mini-chop. The frame, bars, kickstand, etc. are baking at Foremost Powder Coating. Hope to have it running this weekend. Keep your fingers crossed. When it’s up and running and off the Kendon lift, up goes the 45 flatheat chassis. The crate was delivered yesterday to ship the engine and tranny to Lee Clemens at Departure Bike Works.

I’ve wanted to make a handful of adjustments to the Sturgis Shovel including replacing the old cranky stock Shovelheads with new and improved S&S jobs. We’re going to repair the cracking oil lines, realign the Mikuni Carb, black out the pipes and hope she keeps running while I build the John Reed designed V from CCI with a 120 Accurate Pan for another Bonneville effort.

There’s so much more to report, but let’s get to the news:

HAGSETH MAKES RETURE TO RACING–Team Fun Center Suzuki Gets Even Stronger with the Return of Brad Hagseth.Reading, PA January 3, 2006 – Mike Kidd Entertainment Group – today announces that Brad Hagseth of Team Fun Center PPG TLD Suzuki will return to racing in round seven of the K&N presents BooKoo Arenacross Championship Series Brought to you by Toyota.

“I am really excited to get back out there racing,” said Brad Hagseth. ” I have been training hard the last three weeks. I got one more week of hard training and I will probably ease up a little bit on Thursday before I fly out. Reading should be fun. You can definitely expect to see the #5 Suzuki at the front of the pack all weekend long.”

Hagseth suffered an unfortunate broken ankle during media day just before round one action in Fort Worth, TX. His injury left Team Fun Center PPG TLD Suzuki down one rider and in need of a replacement quick. Their answer was current points leader Josh Woods.

BooKoo Arenacross Championship Series round seven racing takes place January 6-8, 2006 at the Sovereign Center in Reading, PA. Doors open at 6:00 p.m. with the BooKoo Pit Party giving fans the opportunity to walk the track the pros ride and meet the racers and Miss BooKoo Arenacross Erin Normoyle. Pro Racing goes full throttle at 7:30 p.m. Sunday’s amateur racing begins at noon.

Advance Discount Tickets are available event through Ticketmaster, online at www.ticketmaster.com or by phone at 215-336-2000, Crossroad Powersports , Rossini Racing, and the Sovereign Center and Sovereign Performing Arts Center Box Office.

For more information about the BooKoo Arenacross Championship Series log on to http://www.racearenacross.com or call 817-595-5844.

NEW TRIBUTE ARTIST ON BIKERNET–I was just wondering if Bikernet would ever consider publishing the artwork I submitted here. I am the artist who did this piece as a tribute to a friend who is over in Iraq right now serving with the 419FW from Hill AFB in Utah. He’s coming back soon and looking forward to receiving the artwork I did of him. I title this piece “American Still”. This guy is very patriotic and a devoted Harley fanatic.

I realize he’s up in years but that’s because he’s in the Air Force Reserve and we’ve both spent many years serving. I recently retired with 30 years.

My interest in this is soley for his pride as he would be extremely proud to know his image would be published. Maybe there could be a place or article for military riders. It would be more than enough for me to know he could cherish the idea forever.

I’m also doing a work depicting another military member who has recently been diagnosed with stomach cancer. I am doing another duplicate of the piece submitted here but is a painting on panel. Anything you could do for this patriot would be greatly appreciated. If you want to see more of my style you can go to www.dcampsart.com

–David Camp

We’re always interested in new motorcycle art and art that respects members of the military.–Bandit

YOU ASKED, CREATIVE CYCLES DELIVERED–The latest pipe from Creative Cycles is so bitchin’, they went ahead and put the word in the name. The handmade BMF exhaust pipe (Bitchin’ Mother Fuc***) is hand-produced-to-order. Just like the trick pipe off of the incredible Creative Cycles’ Hard Rock Bike, the BMF pipe is black-wrapped with a 4-inch, chromed, claw-style outlet.

This insane pipe fits all H-D Evo and Twin Cam models as well as most American V-twin custom applications with forward controls (including right-side-drive models as long as they utilize forward controls).

For more information, contact: Creative Cycles, (732) 751-1403, http://www.creativecycles.com.

DREAMCRAFT STUDIOS IS FEATURED EXOTIC CUSTOM BIKE MANUFACTURER AT CAESARS PALACE, LAS VEGAS– Dreamcraft Studios of Ontario, CA, the industry’s newest premier custom motorcycle design company, is excited to announce that it has entered into a unique agreement with Caesars Palace, Las Vegas, one of the world’s largest and most prestigious gambling resorts attended by millions of visitors annually.

The agreement appoints Caesars Palace as the exclusive U.S. dealership for Dreamcraft custom commissioned motorcycles. Dreamcraft’s exotic high end custom bikes and an exciting new line of Dreamcraft Apparel will be featured and sold in the “Exotic Cars at Caesars Palace” showroom and dealership which beganDecember 1st, 2005. The Exotic Car showroom at Ceasars is also Nevada’s largest Ferrari automobile dealership and draws thousands of visitors daily from around the world, providing Dreamcraft unprecedented exposure to high end motorsports enthusiasts.

Dreamcraft Studios is a unique partnership between Larry Nagel, a renown motorsports fabricator for the Hollywood movie studios, and Paul Yang, an Art Center College of Design graduate who brings his own fresh ideas to the custom motorcycle scene. Their first custom bike building venture together was “Saga” which made its world premier with much media acclaim at the 2004 LA Calendar Motorcycle Show and is featured in the new 2006 Iron & Lace Calendar.

At this year’s 2005 LA Calendar Motorcycle Show, Larry and Paul returned with their newest custom “Rapture” to take home the coveted Performance Machine Best of Show Award, a big chunk of the Show’s $70,000 awards purse, and qualified for the American Motorcycle Dealer’s World Championship of Custom Bike Building held November 18-19th 2005 at the Mandelay Bay Resort, Las Vegas, NV.

For additional information about Dreamcraft Studios go to http://www.DreamcraftStudios.com.

FAMOUS TAPERED LEG SPRINGER– Legendary Carson City, Nevada-based manufacturer Paughco is one of the most respected designers and manufacturers of custom and OEM-style Springer front ends in the market.

The hot news is that the company has recently unveiled an entirely new collection of its trend-setting Tapered Leg Springers. The Bikernet Crew installed one on their Sturgis 2005 Chopper and rode it to Sturgis.

Featuring the company’s exclusive, tapered rear legs, they are said to be superior in strength and more closely resemble the original factory front ends than any other Springer front ends on the market.

Offered in sizes ranging from stock to 24in over in increments of 3in, lengths between 15in and 24in over are supplied with 3 degrees of additional rake only.

Dealers can order either the traditional ‘Wide’ style with or without the factory style shock, or choose Paughco’s popular ‘Narrow’ Chopper design.

Standard finish is chrome, but bare metal or powder coat are offered as options.

PAUGHCO INC.
Carson City,
Nevada, USA
Tel: 775 246 5738
Fax: 775 246 0372
E-mail: info@paughco.com
http://www.paughco.com

V-ROD NEWS FROM DAKAR–Team Hog Wild experienced mechanical problems during the Stage 3 1st Liason. Rumor has it that they had sprocket problems and recieved some mechanical assistance in temporarily rigging the damaged sprocket. Unofficial news is that they were not allowed or were unable to continue on the Special. The tracking system shows them proceeding on to the end of the stage and the bivouac, but no time is posted for the Special. More info forthcoming as it is received…

The latest speculation on Hog Wild Racing. In reading the rules, we found that a competitor arriving to the beginning of the Special more than 1 hour late is disqualified from the race and cannot continue on the course. All official equipment (electronics, road book, etc.) are supposedly surrendered to the officials. If the Iritrack system was functioning properly, there is no doubt that Scott and Duane arrived late. While we have not heard any official news, this unfortunate circumstance probably seals the deal for whether the team will be continuing. Sad news if it is all true.

Further details of the mechanical problem. Again, rumor has it that the front drive sprocket was worn completely down. The team supposedly sought out a mechanic and had one manufactured to get them back on the road. Unfortunately, this took too long.Cross posted from Sidecarcross.com website…

Chris Varju crashed badly twice in the Dakar today and is out. Broken collar bone and ribs. It looks to me on the standings page at http://www.dakar.com that half the bike field has DNF?

Scott and Duane I gather will be unable to continue because they came in late. Mossila has also disappeared, but so have many others?

My friend Chris Varju crashed twice and has broken a collarbone and three ribs, we saw him interviewed on local tv station. Now get this. His bike will shipped back to Paris…but…he has to make his OWN way back to whatever destination he chooses. We couldn’t believe it! He said live on air, if an entrant is not in a serious medical condition and needs to be transported via a hospital then said entrant must make his own way home at his own expense. Un****inbelievable!

Simon Pavey and Charley Boorman are also not on the standings list.

Good news for Aussies. Caldercott is 8th.Good news for Americans. Grider from Team Red Bull is hanging on at 32.

I don’t know where the Hummer is.Caldercot had no intention of racing the Dakar this year, a month ago a guy named Duran crashed and Andy got a phone call asking if he wanted to replace the bloke.I feel bad for Chris and your buddies on the V-Rod. It’s not called the toughest rally in the world for nothing I guess.

That’ s been my day .
–Laterz: Jaq.

AMDRAGS & TARS LAUNCHES IN 2006– AMDRAGS, a new Harley drag racing association, launches in 2006 offering Harley racers, riders, showbike owners and enthusiasts plenty of action on and off the drag strip.

Each AMDRAGS weekend will feature two days of American V-Twin drag racing, a Saturday morning all-brands Thunder Alley Race School, a two-day AIMSA custom, chopper and classic American motorcycle show, and a two-day swap meet at each track location.

According to AMDRAGS Director of Racing Matt Polito, negotiations are ongoing with additional tracks, but, as of press time AMDRAGS has already locked in race weekends at Rockingham, NC on June 3 & 4, Maple Grove, PA on July 8 & 9, and at Budds Creek, MD (MIR) on September 9 & 10.

AMDRAGS, which stands for American Motorcycle Drag Racing All Gas Series, features professional and amateur divisions with a class for most gasoline powered American V-Twin motorcycles starting with street ET and getting progressively faster and more serious.

The 2006 rules and classes are listed on the web site http://www.AMDRAGS.com.

THUNDER ALLEY DRAG RACE SCHOOL OPEN–In addition to the AMDRAGS races, there will be a Thunder Alley Race School on Saturday mornings. Run by Maura Hall, TARS is a 3 hour school to teach the fundamentals of motorcycle drag racing. Each student must supply his or her own motorcycle (and make, model or size) and riding gear. Instruction includes concepts and theory of motorcycle drag racing as well as several hours of track time under the watchful eye of the pro instructors.

Because class size is limited, preregistration is recommended. Info and registration at http://www.AMDRAGS.com

For more information on AMDRAGS or the Thunder Alley Race School please visit www.AMDRAGS.com or email to info@AMDRAGS.com.

CRAZY HORSE PAINTING HATES WINTER–Well here it is again another wonderful year here at Crazy Horse Painting. I hate winter. I used to love winter. I would paint bikes all night and ski all day. I would sleep every once in a while. But here in the high profile world of big time custom motorcycles, ya gotta win shows. So that means long nights and days almost everyday after New Years until Daytona Bike Week in March. Trying to create something that will hopefully blow everyone’s doors off. It sounds more fun than it is as the bike show deadlines ominously loom over my head like a dark cloud reminding me, “get that paint finished fast or you’re screwed! And it has to great! ”

Too bad I’m not painting this lovely lady on a bike. I painted her for an airbrush contest this fall. East Coast vs west. I went up against Deborah Bryant from Craig Fraser’s shop. The whole thing was featured in Auto Graphics magazine.

This sweet pan belongs to Bowzer from Agoura Hills, CA. (Humm?) We got a few other new rides over in the Reader Showcase so check ’em out and send yours in. Maybe I’ll get my ass and post it even.

No real news from Waxhaw Creek, NC. Nothing happened here this week. Not if you don’t count all the guns going off New Years Eve. But that was it, hicks shooting guns. And no we didn’t do any of that at the Crazy Horse farm. Nope. Not us. No, no those aren’t shells all over the front porch. They’re very narrow dixie cups with brass bottoms.

Hey! A few cars drove by this week. The mail got delivered today. But that’s they way we like it here. Boring with just gunfire and sporatic mail delivery. Maybe I’ll fire up the chopper this weekend and wake up the place. Too busy painting to ride it. Stupid winter! My baby chop don’t like to come home. Damn bike will roam all over the place for hours before it decides to come back. I didn’t ride New Years day. I cleaned out a shed. I’m such a hard ass. So hard core. Hey, I can actually sorta find things in that shed now! The bikes are still pissed at me.

Well go on over to my website and check out my real flames. Buy a book. Leave a flirty comment. http://www.crazyhorsepainting.com

And be sure to check out our blog http://www.femmefatales06.blogspot.com. We got some new stuff. New pics, new rants. And people are actually reading it! Leave a comment even.

–Crazy Horse

JANKLOW MAY GET LAW LICENSE BACK–Former U.S. Rep. and Gov. Bill Janklow’s law license will be reinstated on Feb. 15, the South Dakota Supreme Court ruled Thursday.

Janklow, a former four-term governor who resigned from Congress in the wake of a deadly traffic accident, was automatically suspended as a lawyer.

A jury found him guilty in December 2003 of second-degree manslaughter for killing Randy Scott of Hardwick, Minn.; Scott was on a motorcycle that smashed into the side of a car Janklow drove past a Moody County stop sign in August 2003.

The Republican politician spent 100 days in jail, was put on probation and cannot drive for three years.

The court’s decision agrees with a recommendation by the State Bar’s Disciplinary Board.

Circuit Judge Rodney Steele, who sentenced Janklow after his manslaughter trial, had recommended that Janklow’s law license not be returned until his probation is finished in January of 2007.

Continued On Page 2

Continued From Page 1

MC ADVANTAGES DISTRIBUTING STAINLESS CREATIONS EXHAUST–With the rollout of a new 2006 catalog, MC Advantages has announced that itwill distribute Stainless Creations handcrafted exhausts. “MC Advantageswill be carrying almost every style of Stainless Creations pipe,” notes KentReed, General Manager of MC Advantages. “These compliment the MC productlineup by offering many more striking designs. These are another premiumpipe to keep us positioned as a premier distributor of performanceaftermarket parts.”

Stainless Creations pipes are designed for almost every RSD and LSDapplication including many that fit Twin Cam and Evo applications innumerous different offsets. Each .065 thickness pipe is hand-polished to abrilliant shine and includes a sample of polish get them clean beforeburn-in and to keep them looking new. A separate spacer kit is alsoavailable for fitment of ’05-’06 Big Dog? models.

MC Advantages
1-800-726-9620
http://www.MCAdvantages.com

HARLEY’S 10 COMMANDMENTS–
I. The one true American- made motorcycle is the Harley Davidson, and thou shalt not put no other motorcycles before it.
II. Thou shalt not bow down and worship nor serve the God of Chrome; for, lo, he is a false god and will not get thy butt home.
III. Honor thy authorized dealer and the motorcycles thy sell, and that thy days may be long and fruitful in the land of Harley.
IV. Remember the weekend, and keep it open. For it is written, five days shalt thou labor, and for two days shalt thou ride thy Harley, drink beer, and have some FUN.
V. Thou shalt not covet thy neighbor’s Harley, nor her manservant, nor her maidservant, nor her ox, nor her cute little butt.
VI. From the throne of thine Harley, thou shalt not stoop to wave at sinners who ride Jap-crap, for Jap-crap is known to be the handiwork of the devil.
VII. Thou shalt not pass by nor turn away from thy brother Harley rider who is in mechanical distress.
VIII. Thou shalt not pose. Verily, I say unto you, it is easier for a poser to pass his gold Visa card through the eye of a needle than to enter into the true fellowship of Harley-Davidson heaven.
IX. When riding thy Harley on the Road of Life, thou shalt not whine nor snivel, and thou shalt not suffer to ride alongside those who do.
X. Park not thy Harley in the darkness of thine garage, that it may collect dust for want of being oft ridden. Ride thy Harley with thy Harley brethren, and rejoice in the spirit of the road .

–from Tom K.

WEST TEXAS BIKER RUNS FOR OFFICE– I just received this Press Release from one of my fellow NCOM Board members who’s in the In-Country Vets M/C and the Alabama Confederation of Clubs. Jerry Kelly is also in the ICV M/C, and has thrown his hat in the ring for Public Office. I wish him and the Texas Bikers campaigning for him the best of luck as they seek to incorporate Sputnik’s Five Steps To Freedom in TX House District 79. Guys like Jerry are an inspiration!

In Liberty,

Tiger Mike,
ABATE of OK; OKCOC

Texas Motorcycle Rights Association II Coordinator and Vietnam War combat veteran filed for Texas House District 79 in El Paso El Paso, Texas – Jerry Kelly, Texas Motorcycle Rights Association II (TMRA-II) coordinator, Vice Chairman of the West Texas Confederation of Clubs and a Vietnam War combat veteran, filed for State Representative of Texas House District 79 in El Paso.”The Texas motorcycling community has consistently advocated the involvement of citizens in the political process; it has successfully supported many candidates for public office, testified at public hearings issues important to average working families, while also fighting to preserve the Rights of all Texans. We are now taking the initiative to run for various seats across the state.” Kelly said.

“District 79 is growing and deserves to have the representation to match that growth. I have filed for State Representative of House District 79, in order to ensure equal representation for all Texans,” Kelly said.

–from Rogue
Motorcycle Hall Of Fame Member 2005

ANOTHER EXCLUSIVE BIKERNET ART EXHIBIT–This montage was originated from Sturgis 2004 photography.

Ride Hard,
Whiplash Biker Photog
mailto: soffordphotos@comcast.net

BIKERNET DEFINITIONS–We’ve all heard about people having guts or balls. But do you really know the difference between them? In an effort to keep you informed, the definition for each is listed below.

GUTS – is arriving home late after a night out with the guys, being assaulted by your old lady with a broom, and having the guts to ask, “Are you still cleaning, or are you flying somewhere?”

BALLS – is coming home late after a night out with the guys, smelling of perfume and beer, lipstick on your collar, slapping your old lady on the ass and having the balls to say, “You’re next.”

I hope this clears up any confusion on the subject.

-Biscuit

AMERICAN IRON & ROADBIKE MAGAZINES ARE NEW ASSOCIATE SPONSORS OF THE LA CALENDAR MOTORCYCLE SHOW SPONSORED BY BIKERNET.COM–The Los Angeles Calendar Motorcycle Show sponsored by Bikernet.com, welcomes two of America’s leading streetbike magazines, American Iron and RoadBike, as Associate Magazine Sponsors of the Show beginning this year 2006 under a newly signed 5-year agreement. Published by Tam Communications, American Iron Magazine is one of the biggest selling titles in the American V-Twin market, while RoadBike Magazine is the biggest print magazine in the fast growing Metric cruiser and streetbike market. The Los Angeles Calendar Motorcycle Show is the biggest custom and performance streetbike show in America, and this new partnership brings together these respective market leaders to continue to grow and expand, both for the benefit of the motorcycle industry involved with both, and for their fan base of readers and attendees.

Buzz Kanter, Publisher of Tam Communications said “We are excited to have American Iron & RoadBike become involved as multi-year Associate Sponsor and Partner in the LA Calendar Motorcycle Show, one of America’s premier street motorcycle events. And certainly the most recognized and popular streetbike event on the West Coast. It will help to give our magazines a closer tie-in to our readers and advertisers located there, add more balanced coverage of West Coast bikes, builders and product companies. And it will help our continued growth as America’s favorite American V-twin and Metric Street Bike magazines. We will have special American Iron and Road Bike Readers Trophies to award in the Bike Contest, and Road Bike magazine will be title sponsor of the new RoadBike Metric Custom Class to help promote the biggest growing motorcycle segment in America.”

Jim Gianatsis of Gianatsis Design Associates, producers of the LA Calendar Motorcycle Show, as well as the popular FastDates.com Calendars and Website, had this to say about the new partnership, “I am really excited to have both American Iron and RoadBike Magazines join us to share with us their readership, and to help us expand the audience and market base of our Calendar Motorcycle ShowThe 15th annual Los Angeles Calendar Motorcycle Show Weekend takes place July 15-16th 2006 at the Queen Mary Event Park in Long Beach / Los Angeles, as it continues its extraordinary growth and success having become the biggest Custom and Performance Streetbike Show in America (and possibly the World) focused on the custom, cruiser and high performance sport / streetbike markets.

Spectator attendance reaches close to 20,000 hard core motorcycle enthusiasts at the exciting 2-day weekend. Exhibitors include 195 major motorcycle and parts manufacturers, with selected product and apparel venders added into the mix to keep it fun for the entire family. Spectators have a chance to meet top celebrity custom bike builders and attend free Iron & Lace Calendar Bike Builder Seminars, watch the the excitement of the Jardine World Record Horsepower Dyno Shoot Out, see the world’s top custom bikes in the Performance Machine Calendar Show Bike Building Championship featuring the new RoadBike Magazine Metric Class, enjoy the exciting new Metric Midway featuring Japanese Cruisers, European and Japanese Sportbikes.

SAMPLE EPA LETTER-DON’T FORGET TO WRITE– I am writing this letter with regard to the enforcement of new motorcycle emissions laws regarding custom built motorcycles.

I believe in the EPA and it’s purpose, however occasionally I do not understand the methodology employed by the agency.

By the EPA’s own studies motorcycle pollutants are accountable for less than one percent of all mobile source emissions. With this in mind, the EPA has put forth guidelines which are so stringent that it will (through enforcement) virtually eliminate an entire sub-sector of our economy if implemented. That is, the small sized motorcycle builder and hobbyist.

Considering the net pollutants produced by on-highway motorcycles, the net effect of enforcing such a law is negligible at best; perhaps not having any effect at all.

Harley Davidson maintains the largest market share in our category. If these laws go through, the EPA will have direct influence in forming a monopoly out of Harley- Davidson which is in direct conflict with the Sherman Antitrust Act. I cannot find a reason other than of a political nature to implement this law.

I feel that a feasibility study should ensue entailing cost figures to implement versus other category pollutants which have a much more severe impact on our environment. Do we have a comparative analysis to justify these new standards and the cost to implement them, compared to say, pollution credits for large factories, where we are talking in terms of TONS OF EMISSIONS per year for each factory in comparison to what a few custom motorcycles put out.

Also I would like to hear an explanation on the constitutional nature of an environmental agency determining what type and quantity of motorcycle an individual can own. I do not understand how an agency of our Government can enforce a law which has a provision where a husband dies shortly after buying his one “lifetime exempt” motorcycle that his spouse cannot sell it for five years to settle her estate! Considering a custom motorcycle sells for anywhere between $20,000 and $250,000, I would suspect that the proceeds from this might help the bereaved spouse. Furthermore is there a marketplace for this motorcycle anymore considering the strict guidelines associated with it? Thus it creates even more economic hardship.

Americans ride Harley-Davidsons and custom bikes for sport more than transportation. We can relate to the American heritage behind Harleys and the freedom that they represent. This is an icon of American culture not merely a mode of transportation. When a governmental agency steps in to take away a piece of our freedom and liberty for no known positive net effect other than to strip our freedom and cost us more tax payer dollars, we will all lose.

A more direct approach would be welcomed in the custom bike community. For example EPA approved motors. The consumers and industry would gladly floor the cost of a compliant motor standard. If the motors are compliant (and not needing periodic compliance tests (no different than current law)), then I see no need for any further interpretation of the law with regards to any other components on the motorcycle or different registration or ownership guidelines or infringements to ownership.

Very Respectfully

— Joseph Savino,
Engineer and custom motorcycle hobbyist

THE MISSING LINK–Thanks for the mention in the Sunday post but something is missing from my listing. I am grateful that you decided to include a hot link to me but the link is incomplete because it drops my dealer number.

Here’s the correct link http://www.synthetic-oil-tech.com/1124190 , notice the numbers /1124190/ after the name these are what identifies my site with Amsoil and credits me with if there is a purchase.

Bob T from, Chop and Grind, has also contacted me and it appears he will be using my Amsoil too so a big THANK YOU!!!!!! to Bandit and you for hooking us up. I have every intention of being in Bonneville with some other gear heads to see how you guys do.

–Nick
Me somewhere in Utah 2006.

Continued On Page 3

Continued From Page 1

SCOTT JACOBS PRINT TO BE PART OF MUSEUM RAFFLE– December 2005 – Once again, the Sturgis Motorcycle Museum & Hall of Fame will benefit from the talent and generosity of famed motorcycle artist Scott Jacobs, who is donating one of his most popular pieces, “Pushing the Limit” for the 2006 raffle.

Andrew Hines, who has just won his second consecutive NHRA Powerade Pro Stock Motorcycle Championship, is the racer portrayed in the painting. “Because of all the recode breaking that Andrew continues to do, Scott thought that “Pushing the Limit” would be a great piece for the Museum,” said Sharon Jacobs.

“Last year Scott donated a print for the Museum raffle,” remarked Museum Director Pepper Massey-Swan. “It was so well received we knew we had to ask him for another print this year. Everyone wants to brag that they have a ‘Scott Jacobs’ print in their home. Our raffle can help make that a reality for a lucky winner.”

The framed print, number 35 of 50, will be signed and authenticated by Scott Jacobs, and signed by racer extraordinaire Andrew Hines.

The Sturgis Motorcycle Museum, a non-profit 501 (c) 3 organization, holds an annual raffle, one of its largest fund raisers. Three prizes are offered on each $10.00 ticket. The 2006 prizes are: a 2006 Harley-Davidson FLHX Street Glide; Scott Jacob’s signed print “Pushing the Limit”; and a one of a kind commemorative Henry 44-40 rifle. Tickets will be available for purchase on Monday 9 January 2006 on the Museum web site http://www.sturgismuseum.com, by telephone 605.347.2001 or at the Museum.

The Sturgis Motorcycle Museum & Hall of Fame is open year round.

A COP’S WORST NIGHTMARE–Anyone who has ever been in law enforcement praysthat they will never get a call like this on their watch.WARNING – The attached photo is very graphic.

–from Bob T.

NEW BIKER SERVICE–Hello, we would like to tell you about a new service that is available toresidents of Az, Ca, Nv, Ut NM Co. We are Steelhorse Hearse LLC. We arelocated in the Phoenix, AZ area.

We provide a dignified way to give yourloved ones a memorable last ride. Are web site is located at http://www.steelhorsehearse.com.

Thanks for taking a look at our site.

— LaVerneand Stewart McGee

RARE JAPANESE HARDCORE CHOPPER RAGS FOR SALE ON BIKERNET–This Japanese mag, not distributed in the U.S. is rare. They ship us one box of 40 copies each issue and were almost out. You can’t read it, but just the perfect bound package, the quality of the paper and the photography of old school rides built here and in Japan make each page worth while.This monthly publication just goes to show, the Japanese truly do love American Iron as much as the rest of us.

The mag might read from right to left, but the bikes inside are definetly headed in the right direction.

So come see what’s going on across the sea. You won’t be disappointed.Price includes shipping and handling. JUST CLICK ON THE BLACK MARKET BANNER BELOW.

YEAR’S BEST HEADLINES– CRACK FOUND ON GOVERNOR’S DAUGHTER
[Imagine that!]

Something Went Wrong in Jet Crash, Expert Says
[No, really?]

Police Begin Campaign to Run Down Jaywalkers
[ That’ll stop ’em. ]

Is There a Ring of Debris around Uranus?
[Not if I wipe thoroughly!]

Panda Mating Fails; Veterinarian Takes Over
[What a guy!]

Miners Refuse to Work after Death
[No-good-for-nothing lazy so-and-sos!]

Juvenile Court to Try Shooting Defendant
[See if that works any better than a fair trial!]

War Dims Hope for Peace
[I can see where it might have that effect!]

If Strike Isn’t Settled Quickly, It May Last Awhile
[You think?]

Cold Wave Linked to Temperatures [Who would have thought!]

Enfield (London) Couple Slain; Police Suspect Homicide
[They may be on to something!]

Red Tape Holds Up New Bridges !
[You mean there’s something stronger than duct tape?]

Man Struck By Lightning: Faces Battery Charge
[he probably IS the battery charge!]

New Study of Obesity Looks for Larger Test Group
[Weren’t they fat enough?!]

Astronaut Takes Blame for Gas in Spacecraft
[That’s what he gets for eating those beans!]

Kids Make Nutritious Snacks
[Taste like chicken?]

Local High School Dropouts Cut In Half
[Chainsaw Massacre all over again!]

Hospitals are Sued by 7 Foot Doctors
[Boy, are they tall!]

And the winner is….

Typhoon Rips Through Cemetery; Hundreds Dead

–from RFR

HIGH SCHOOL TEACHER MAKES SEAT PAN–Here is a new steel seat pan design Iam selling..Available in the raw finish or the blasted

Respects
–TEACH

Kevin Baas

BAAS METAL CRAFT

Custom made steel signs, art, furniture and fabricated parts.
http://www.baasmetalcraft.com
952-215-1252
“When in doubt, burn out!”

BIKERNET BONNEVILLE OR BUST FOR 2006- – Chop N Grind Racing So. Cal. TeamWe are a small crew here in the High Desert in Southern California. So far we have no sponsors or big cash. Our Bonneville bike project is being done by “The seat of our pants”. We have a small budget, four man crew and big dreams.

Our goal is for the 1350 Class “Altered,Pushrod,Gas”, (APG Class). The record is held by Vance Breeze for the national record at 163.854 mph, set in 1997. We aim to beat it.

We are going “Come Hell or High Water”. Which is common here in the High Desert.

I have not been back to Bonneville Salt Flats since 1976. As part of the Jammer Crew sponsored by Easyriders. Our crew put Dave Campos in the 200 mph club on a water cooled dual engine Harley-Davidson Shovelhead, designed by Bob George. I was proud to be part of that crew.

Larry is a 10 year plus veteran Harley Davidson mechanic. He ran at Bonneville Speed Week 2003 on a Ironhead in the APBG (Altered,Pushrod,Blown,Gas) class.

We both got the bug again, once you get the taste, smell and speed of Bonneville it`s something you never forget.

Jim Leinweber will be supplying our cams and technical support. Jim is a local here in our town. He has been grinding cams and racing since the 1950`s.

Race date is September 3rd – 7th 2006 at the BUB 3rd International Motorcycle Speed Trails at the Bonneville Salt Flats.

Our plan is to meet up with Bandit’s Bikernet 5-Ball team and all ride to Bonneville. This will be better than the ride to Sturgis. Everyone is welcome to meet up with us on the road and ride out together. This is going to be a great year in Bonneville especially with the movie “The Worlds Fastest Indian” coming out. We have 8 months to do all this. The clock is ticking.

Any support you can throw our way will be great. All sponsors will be advertised on the “Chop N Grind” Bonneville bike. Plus monthly up-dates will be posted on Bikernet and Emails sent out.

Thanks for Your Support
–Bob Tronolone & Larry Petirie
Chop N Grind Racing Team

BIKERNET SHOP PHILOSOPHY, WATCH OUT–When his printer’s type began to grow faint, a man called a local repair shop.

The friendly person who answered the phone said the printer probably only needed to be cleaned. Because the store charged $50 for such cleanings, he advised the caller that he might be better off reading the printer’s manual and trying the job himself.

Pleasantly surprised by his candor, the caller asked, “Does your boss know that you discourage business?”

“Actually it’s my boss’s idea,” the employee replied sheepishly. “He says we usually make more money on repairs if we let people try to fix things themselves first.”

–from CarlR

TEXAS ATTORNEY GENERAL RULES POKER RUNS VIOLATE THE TEXAS PENAL CODE–We will have to get together and plan a way around this Bull Shit. This isjust another justification for Rick Perry’s agenda of no gambling (unlessthe State is running it.)

It is a simple thrust against our lifestyle and a challenge we can notafford to let stand without a fight. Watch for more from your state chairin a few days after some discussion with attorneys and legislators.Sputnik

–Rogue

NEW YEAR’S EVE@SKOOTERZINMONTICELLO, MISSISSIPPI– DOORS OPEN @ 10:00 A.M. FOR OUR 1st DAY OF BUSINESS.

POKER RUN WILL BEGIN @ 1:00 WEATHER PERMITTING(BEST HAND AND WORSE HAND WINS MERCHANDISE FROM STORE)AMOUNTS TO BE ANNOUNCED ON SATURDAY

IN THE EVENT OF INCLEMENT WEATHER THIS POKER RUN WILL BE DONE IN HOUSE ALL THRU THE DAY

LIVE BAND WILL KICK OFF AROUND DARK:30 AND BRING US INTO THE NEW YEAR!

SKOOTERZ……… IS THE NEWEST ATTRACTION TO MONTICELLO. WE WILL BE CARRYING MOTORCYCLE APPAREL, ACCESSORIES AND MORE. SOME ITEMS ARE NOT YET IN STOCK BUT DUE TO THE HOLIDAYS IT MADE GETTING SOME OF MY STOCK A LITTLE HECTIC. BUT WE ARE LOOKING FOR A LARGE SHIPMENT IN BEFORE SATURDAY. WE ALSO HAVE NASCAR ITEMS AND SOME OF YOUR FAVORITE COLLEGE SPORTS MERCHANDISE. ALSO WE WILL BE DOING CONSIGNMENT OF MOTORCYCLE RELATED ITEMS, ANYTHING FROM YOUR OLD LEATHER JACKET THAT NO LONGER FITS TO HELMETS YOU’VE DONE SCUFFED OR OLD PARTS TO YOUR BIKE…OR YOUR BIKE, IF IT’S TIME TO GET RID OF THE OLD AND GET SOMETHING NEW COME IN AND WE WILL HELP GET IT GONE! WE WILL SET ANY OF THESE ITEMS UP FOR YOU ON CONSIGNMENT. THERE WILL BE MORE DETAILS ON THIS LATER.

THIS IS SOMETHING NEW FOR CRAIG AND MYSELF SO BEAR WITH US AS WE GET SKOOTERZ OFF THE GROUND. FOR THOSE INTERESTED WE HAVE A POOL TABLE IN THE BACK AND A FEW MORE GAMES ON THE WAY. HOPE TO SEE YOU ALL ON SATURDAY AND IF NOT SATURDAY STOP IN NEXT WEEK AND CHECK US OUT!

NOT FAMILIAR WITH THE AREA WE ARE LOCATED ON HWY 84 WEST JUST EAST OF WARD’S, WE ARE IN THE STRIP OF BUILDINGS IN FRONT OF SUPER VALU GROCERY STORE. ANYONE NEEDING MORE INFO CAN CALL SKOOTERZ @ 601-587-0055 OR CALL ME @ HOME 601-587-4870. .

HAPPY NEW YEAR’S
–CRAIG & LEIGH ANN NEAL

IN THE WIND MAGAZINE–In The Wind March 2006 issue Number 124 is on the newsstands now. Charlie Brechtel is on page 36. Hall Of Fame induction on page 37 and Wind and Fire on 38&39 with Wild Bill Plus a bunch of other good articles.

–Rogue

BIKERNET PHOTO ART EXHIBIT–I shot this at Bikeweek in Datona ’05…the man (Indian Larry) knew his metal didn’t he?

Ride Hard,
Whiplash Biker Photog
soffordphotos@comcast.net

STEALTH YEAR END REPORT–I hope all of you made it through Christmas, and I hope you all had a very good Christmas! We closed STEALTH BIKE WORKS for a couple of days and we are back at it today.

As we get ready to close out 2005, I would like to take a little time to reflect on the past year. For me the big thing was opening STEALTH BIKE WORKS. We have come a long way since May when we opened. It has been up and down like a roller coaster and it has been a great adventure so far.

We have had a lot of help along the way and a lot of support. I would like to thank everyone at Bikernet and all the readers for their encouragement. A special thanks to Mr. Bandit for his advice and for always listening, when I have had to ask him for his advice.

Thanks to the crew at SBW, Max and Chopper John, without you guys a lot of what we do would not be possible. Last but not least, Thanks to “THE MEANEST,” for all you do and all of your encouragement. You always pick us up when we need it the most and when things have been slow and when doubt has started to creep in, you always keep us going in the right direction. Thanks to all of our customers who have supported SBW.

So we look forward to 2006 with anticipation and excitement. We hope to see SBW grow as we approach our one year anniversary. We look forward to new customers as well as continuing to serve our current customers. We have a few things planned for the upcoming year so stay tuned!

We would like to wish everyone at Bikernet headquarters and all the readers a ‘Happy New Year!”

Until next week, RIDE!
–STEALTHMAN

NEEDS CUSTOM PIPES BUILT–I sent you a pic of the style I’m lookin for, pretty much the same style except with a black finish. I want to run it on my ’06 Softail deluxe, taking off the floor boards and running forward controls. I haven’t done anything to the motor yet, but I plan on an S&S air cleaner with a hi flo filter and that type of exhaust to start. That’s has to last for 5yrs cause when I bought the bike new with a 5yr. xtended warr. the clown that sold it to me didn’t tell me that I would void the warr. if I do any major motor work after 60 days of the purchase…new Harley rule!

Anyway do you see any problem with the set up I have in mind?

–Steve
StFer

NEW YEARS NEWS ENDING– The rant continues. I want to thank my old team and the new growing team of Bikernet staff, contributors and sponsors. I can’t thank anyone enough for his or her contributions and support. Nyla Olsen, is the best partner a man can have at his side. Jason Douglass is the best Biker Webmaster on the Planet. Contributors include: Roque, Johnny White, Paul Garson, Don Rogers, Curt Lout, Markus Cuff, Michael Lichter, Pepper, Art Parry, Hiway, Tom Kellerstrauss, Wrench, Snake, Renegade, Wilburn Roach, Jaqhama, Glen Priddle, Tim Conder, Kent Weeks, Spanky, RFR, TBear, Stroker, Layla, Sin Wu, Coral, Rick Raus, Ken Conti, Bob Clark, Jeff Najar, Frank Kaisler, John Van Trump and the list goes on.

I want to thank the companies that believe in us, some for five years or more. We’re pumped about our future and what we can deliver to our readers and sponsors. We plan to give back to our industry by sponsoring the LA Calendar Show, Billy Lane’s Blood Sweat And Gears tours, the Seminole Hard Rock Road House Tours, the Sturgis Museum, The Texas National Bike show, The Wheels Through Time Museum and Steel Dreams Television.

We will update Bikernet on a daily basis and bring you event coverage before the event is over. We have no limitations to deliver the finest content on the planet, only financial borders and time constraints. We’ll work around them as best we can, as the year progress, and deliver tech, events, bike builds and fun constantly.

Finally my goals for 2006, as long as the chrome gods support our efforts. We are building four bikes, 1929 Peashooter (maybe Bonneville 2007), 1940 WLD, 45 cu. In. (Bonneville effort 2006), The First Panhead Sportbike (Bonneville 2006), and a Texas bobber for Nyla, by Kent Weeks. I will publish the first book in a series, based on the biker bastard Chance Hogan. I will continue to write for American Big Twin dealer, American Iron and we’re negotiating with the HORSE. Oh, and finally we’re scrambling to rebuild our 1925 headquarters. We’ll bring you regular reports on our progress on all fronts.

May your 2006 be filled with dreams, hopes, goals, beautiful women, fast motorcycles and fun. Let’s hit it.

Happy goddamn New Year,

–Bandit

Happy Goddamn New Years,

I mean it. I want the entire world to experience the year of a lifetime. Okay, so it’s ambitious, but what the hell. I think we’ll see Iraq stand on its own. Terrorism gangs will loose their momentum and be treated like the punk thugs they are. I believe we’ll witness new insight into the survival of the planet. New fuel options will avail themselves. People will finally discover that money ain’t everything and we can adjust our lives for freedom and happiness, for our families and children and away from the all-mighty dollar chase.

Closer to home, I believe that our industry will come to a meeting of the minds with the EPA and we’ll be free, once more, to build as many bikes as we like and ride forever. I think it will be a helluva year for our industry, with more TV presence, Biker movies and recognition than ever before.

Okay, okay. I’ll drop the rantings and hit the news. I’ll wrap it up at the end. Let’s Party:

HARLEY-DAVIDSON ANNOUNCES SAFETY RECALL AND RELATED CUSTOMER CARE PLAN– Harley-Davidson Motor Company has issued a voluntary safety recall on 2006 model year Dyna series motorcycles built between June 9 and October 19, 2005. Approximately 13,400 motorcycles are included in the recall. The transmissions in the affected motorcycles have a defect which under certain circumstances may allow them to go into a false neutral position even though the neutral indicator light is illuminated.

As part of its Initial Care Program for 2006 Dyna motorcycles, the Company will provide owners with free pick-up and delivery, if desired. This service will commence and recall kits will be available at dealerships beginning the week of December 12, 2005.

The Company estimates that the costs associated with this voluntary recall will be less than$5.0 million and it will reserve these costs in the fourth quarter of this year. The Company also expects to meet its previously-announced wholesale shipment target for 2005.

BIKERNET USED BIKE LOT OPEN FOR BUSINESS–

’97 custom fatboy,loaded w/ chrome,extended fork andraked,about 6k miles custom paint.

’03 fatboy anniversary,luggage rack, tank bib,and VanceHines pipes.

’02 883 Sportster

E-mail me for other info:jw3112000@yahoo.com

–JW

DEMON’S CYCLE ORIGINAL AIR CLEANER ASSEMBLY– Demon’s Cycle Inc. is proud to present a complete air cleaner assembly of our own design!

This air cleaner is CNC-machined from aluminum and then chrome-plated for great looks. The outer cover features a 3-D flames design and can be easily removed for easy access to the filter element or be replaced with another face plate design that we offer.This air cleaner assembly, Includes filter element comes equipped with carburetor adopter.

Custom slick curves of this chrome air cleaner cover pick up the lines of stretched tanks,creating flowing custom and well thought out look for any bike.

15-7/8″ long
4.5″ tall
2-3/8″ wide

Can be used to customize any bike, including Harley-Davidson?,Custom Chopper, etc.

Available EXCLUSIVELY fromDemon’s Cycle South, Inc.

R-MAX BY ROADMAX TRANSMISSIONS WIN PRO-ONE MOTORCYCLE CONTRACT–December 26, 2005: Ontario, CA – R-Max USA by Roadmax Transmissions isawarded the contract to supply right side transmissions for the new line ofmotorcycles manufactured by PRO-ONE.

PRO-ONE is gearing up production and delivering ten custom motorcycles a month,which includes two choppers and two pro-street bikes. These custom bikes sport250 and 300 rear meats and range from $32,000 to $37,000 retail.

PRO-ONE is filling the niche for high quality custom motorcycles at lower pricepoints. They can fulfill this promise because they build 90% of the bike inhouse – including frame, sheet metal, accessories, front end, brakes, forwardcontrols, and headlights.

Each bike comes equipped with an R-Max USA by Roadmax right side drive six speedtransmission and utilizes a 2.94:1 1st gear ratio,
2.21:1 2nd gear,
1.60:1 3rdgear,
1.23:1 4th gear,
1.00:1 5th gear,
and .86:1 overdrive gear ratio for 6thgear.

Internals consist of SAE8620H precision cut full width gears withincreased dog area. They are back cut and diamond media blasted for a verysmooth and quiet operation.

The shift forks are made from heat treated ALBC3alloy because this gives the forks superior strength. Used in combination withthe R-Max USA by Roadmax proprietary shift drum it offers enthusiasts smoothpositive shifting and longer reliability.

The R-Max USA transmissions are dependable, the fit and finish are superb andthey come with a good warranty,” said Josh Siedner, Operations Manager,PRO-ONE. Not only do they look good, the shifting is smooth and theperformance is outstanding.”

R-Max USA by Roadmax High-Tech 3 three inch open primary is used on the PRO-ONEcustom motorcycles. Each High-Tech 3 comes with a polished solid billet motorplate, outside splinted clutch plates for more surface area and a truly quietclutch along with the diaphragm clutch spring for easier clutch leveroperation, polished pulley covers, and a polished belt guard.

STURGIS MUSEUM TO RAFFLE NEW HARLEY-DAVIDSON FLHX– December 2005 – Sturgis Harley-Davidson and Black Hills Harley-Davidson will show their support for the Sturgis Motorcycle Museum & Hall of Fame again this year by donating Harley’s exciting new model, the FLHX Street Glide, for the 2006 Museum raffle.

“When I contacted Jim Burgess at Black Hills Harley-Davidson to ask if we could count on their support again in 2006, I already knew the answer.” said Museum Director Pepper Massey-Swan. “The people at our local Harley shops believe strongly our mission, ‘to preserve the great history of motorcycling’, and understand the importance of having a motorcycle museum in Sturgis. Their continued support helps us to succeed in ways we never imagined possible.”

The Sturgis Motorcycle Museum, a non-profit 501 (c) 3 organization, holds an annual raffle and offers three prizes on each $10.00 ticket. This year’s prizes are: a 2006 Harley-Davidson FLHX Street Glide; a Scott Jacobs signed print entitled “Pushing the Limit”; and a one of a kind commemorative Henry 44-40 rifle. Tickets will be available for purchase on Monday 9 January 2006 on the Museum web site www.sturgismuseum.com, by telephone 605.347.2001 or at the Museum.

The Sturgis Motorcycle Museum & Hall of Fame is open year round.

LAWSUIT FILED OVER CYCLIST’S DEATH–SIOUX FALLS (AP) – A Texas family has filed a lawsuit over a fatal traffic accident that happened when a portable toilet fell off a truck at Custer.

Michael Johnson, 34, of Grand Saline, Texas, was riding his motorcycle along Highway 16 when a portable toilet fell from a Sander Sanitation Service truck. The toilet struck Johnson as he tried to pass the truck, sending him sliding into the path of three cars, according to the accident report.

Johnson died in the Aug. 9 accident.It happened during the Sturgis motorcycle rally.The plaintiffs contend that the toilet was improperly secured, and that Sander and the truck driver are responsible for Johnson’s death.

The defendants have yet to file a response to the complaint.

–from Rogue

BIKERNET BONNEVILLE RUN FOR 2006–It’s in the planning stages with three teams heading out so far. There’s the wild 5-Ball Racing Team with shapely women at the helm, against the Chop ‘n’ Grind Racing Team out of 29 Palms, CA, Then the Custom Performance Renegades out of Phoenix. So far the 5-ball team is headed out to the salt flats with a 120-inch Panhead Sportbike, built by Bikernet, with a Custom Chrome V-Frame rolling chassis designed by John Reed, an Accurate Engineering 120-inch Panhead Engine and a Baker performance 6-speed transmission. What’s our goal? Join the 200 mph club, and if we install a Custom Performance Turbo, who knows?

We are also working with Departure Bike Works on a 1940 WLD, 45 Cubic Inch flathead. Rumor has it that the record is 126 mph.

So far our esteemed Sponsors include: Custom Chrome, Accurate Engineering, Baker Transmission and Custom Performance. Valerie Thompson is our hot shoe rider. I told you the girls are running the show, against those sand-snorting bastards in the desert.

We’re all riding out together in September with anyone who wants to tag along and maybe dodge Sturgis. We’ll bring you periodic reports as we move ahead.

Bulletpr?f Puts “The Fix” On Grinding Starter Engagement–Grinding starter engagement now gets the kiss of death thanks to the innovative Bulletpr?f Belt Drive Fix available only from MC Advantages. This replacement for one-piece or solid jackshafts has ramped teeth and an engineered spring to help integrate the jackshaft easily and quietly before starting. It fits all belt drives with one-piece or rigid jackshaft belt drive setups. Best of all, the price won’t break the bank at only $99.99 MSRP.

Remember, MC Advantages is the only distributor on the market to offer this part. Contact your local MC Advantages dealer for more details and to order yours today!

MC Advantages is a distributor of high-performance V-Twin parts based in Grimes, Iowa, serving dealers in the U.S. and abroad. MC Advantages distributes many brands including: S&S Cycle, Martin Bros., Spyke, Stampede, Prowler, Bulletpr?f, D&M Custom Cycle, TFI, Primo Belt Drives, Platinum Air Suspension, Tauer Machine and many more.

MC Advantages
1-800-726-9620
www.MCAdvantages.com

BIKERNET CAPTURES LETTERS TO SANTA–Dear Santa, You must be surprised that I’m writing you today, the 26th of December.

Well, I would very much like to clear up certain things that have occurred since the beginning of the month! While filled with illusion I wrote you a letter and I asked for a bicycle, an electric train set, a pair of rollerblades, and a football uniform.

I destroyed my brain studying the whole year! Not only was I the first in my class, but I had the best grades in the whole school. I’m not going to lie to you, Santa, there was no one in my entire neighborhood that behaved better than me. With my parents, my brothers, my friends and with my neighbors, I would go on errands and even help the elderly cross the street.

There was virtually nothing I wouldn’t do for humanity!

YO SANTA,

WHAT BALLS YOU HAVE LEAVING ME A FUCKING YO-YO, A STUPID ASS WHISTLE, AND A PAIR OF SOCKS! WHAT THE FUCK WERE YOU THINKING, YOU FAT SON OF A BITCH? YOU’VE TAKEN ME FOR A SUCKER THE WHOLE FUCKING YEAR, TO COME OUT WITH SOME SHIT LIKE THIS UNDER THE DAMN TREE.

AS IF YOU HADN’T FUCKED ME ENOUGH, YOU GAVE THAT LITTLE FAGGOT ACROSS THE STREET SO MANY FUCKING TOYS, THAT HE CAN’T EVEN FUCKING WALK INTO HIS DAMN HOUSE!

PLEASE DON’T LET ME SEE YOU TRYING TO FIT YOUR BIG FAT ASS DOWN MY CHIMNEY NEXT YEAR! I’LL FUCK YOU UP! I’LL THROW ROCKS AT THOSE STUPID ASS REINDEERS OF YOURS, AND SCARE THEM THE FUCK AWAY, SO YOU’LL HAVE TO WALK YOUR BIG FAT ASS BACK TO THE NORTHPOLE, JUST LIKE I HAVE TO DO, SINCE YOU DIDN’T GET ME THAT FUCKING BIKE, YOU PUNK BITCH!!

YOU KNOW WHAT SANTA, FUCK YOU!! NEXT YEAR YOU’LL FIND OUT HOW BAD I CAN REALLY FUCKING BE…YOU’VE BEEN SLIPPING LIKE A MOTHERFUCKER FAR TOO LONG! SO WATCH YOUR BACK NEXT YEAR, YOU FAT BITCH! I’LL KILL YOU!

Sincerely, Johnny

–from Bob T.

MAN WOUND TOO TIGHT– Dr. Art Ting has to be the coolest surgeon in the world. Seven days ago I had a load of operations on both arms. I was worried about a couple on my left one because he had to go through my tattoo, check it out. He went round the outline, so it wouldn’t be screwed up, and he did really small stitches so you won?t be able to see the scar when it heals.

–John Reed
Master Designer
Custom Chrome

HAWAIIAN EDITION OF WINDOWS 98–Windows “Puka” 2005.It has come to our attention that a few copies of the Hawaiian Edition of Windows 98 may have accidentally been shipped outside of Hawaii. If you have one of the Hawaiian Editions you may need some help understanding the commands. The Hawaiian Edition may be recognized by looking at the opening screen. It reads Puka 2005 with a background picture of Iolani Palace superimposed on the Hawaiian Flag. It is shipped with a free Gabby Pahinui screen saver. Also note: The recyle bin is labeled “opala.” My computer is called “dis gun fun ting.” The keyboard is known as “da kine.” CDs are “da ting fo inside da kine.” The mouse is called “da clicka.”
Inside of Error Message you get one small kini opala covered with a poi bag and duct tape.

Terminology:

ok…………………..ah dats awright
Cancel……………oops
Reset…………….gunfunit
Yes……………….no matta
No………………..naaaah
Find……………..wea da heck
Go to……………ovah deah
Back…………….ovah heah
Help…………….oh oh
Stop……………oh no
Pause…………..wait wait wait
Start………….shoots
Programs…….da kine fo dat
documents…..stuffs
Thesuarus…..how you say….
Indent,,,,,,,,,,,move em in
Flush right….stat da oddah side
Center………..stat in da middo
Exit……………neva mine
Graphics…….pichahs
Save…………..good good good
Reveal codes..wat da hell

Also note that Puka 2005 does not recognize capital letters or punctuation marks. We regret any inconvenience it may have caused if you received a copy of the Hawaiian Edition. You may return it to Microsoft for a replacement version.

–from Chris T.

SAMSON EXHAUST ADVICE–Sounds like some cool project bikes for the salt. I talked to Ray Price thedrag racing legend we sponsor and asked him why he doesn’t use a 2 into 1system on the drag bike, and he says they don’t have any benefit for top end.By the way we set a world record in October for the 1/4 mile on our bike.6.256 seconds and 222.54 mph. He just uses step headers.

–Kenny Price
Founder/CEO
Samson Motorcycle Products, Inc.

Continued On Page 2

The bus was a Long Beach, California city bus that was given to Dutch by awoman in the early ’60s. for payment of some work he had done for her.He set up living quarters at the rear, the remainder of the vehicle wasa machine shop, including a bluing tank and an old metal lathe coveredwith Dutch’s pinstriping. The floor was covered with cigarette buts, beercans, and metal shavings. VonDutch was at best, a terrible housekeeper.

Back in the slleping quarters was a TV and about150 manuals on all sorts of machinery, motorcycles, and guns. He had aphotographic mind, so all the words in these books, were in his head. Hecould dictate verbatim, paragraph by paragraph, any part on any subjectin these manuals…..and give you the page number, too. I asked him onvewhy he bothered to keep the books, since he had them all memorized wordfor word. He said “I like to look at the pictures!”

Meet The Author
Bob Burns shared a 38 year friendship with Von Dutch that began in 1954 andended with his death in 1992. Today Bob lives with his wife Dawn in Prescott,Arizona where they own and operate Bob Burns Signs & Pinstriping. Stayedtuned for a future LetterheadProfile on Bob, his family and his work.

In the meantime, drop by hiswebsite. You may also want todrop Bob some e-mail to let himknow how much we all enjoyed sharing his memories and photos of the lifeand times of Von Dutch.

Continued From Page 2

S&S CYCLE ANNOUNCES NHRA AND AHDRA SEASON RECAPS–LA CROSSE , WI (December 19 2005) S&S Cycle recounts highlights of the 2005 NHRA and AHDRA season.

Having built an almost 50 year reputation on racing success, S&S Proven Performance engines and components played a huge part in the 2005 drag racing season. In the NHRA Pro Stock Motorcycle series, six teams contested the class with S&S 160ci billet, Pro Stock engines. Week after week, at least five of the S&S powered teams would make it into the Sunday elimination rounds. In eight of the 15 races this season, an S&S powered Pro Stock bike was in the final round, leading to five wins total for the season! One third of the entire season was won by S&S powered bikes, two races for went to Chip Ellis and the G-Squared Team and three races to Ryan Schnitz and the Muzzy Racing Team. Additionally, Matt Smith, on the G-Squared/MAC Tools S&S powered bike went 7.00 at 189.82 mph, recording the third quickest NHRA Pro Stock Motorcycle run ever. G-Squared is the exclusive US Distributor of Race Parts for S&S Cycle.

Moving over to the AHDRA, S&S sponsors the Pro Gas, Pro Stock, Super Sport and 124 Challenge classes. This diverse group of events and riders saw excitement at every level. Julia Holiday won the Super Stock championship while Michael Ray impressed everyone with his S&S 124 Challenge Class run of 9.336 seconds at 143.22 mph. Dale Raudenbush set a Pro Stock record pass with a 7.399 pass while Dave Feazel set the same class mph record with his 180.72 run. Another highlight came from Ryan Schnitz on his S&S powered 160ci billet Pro Stock bike running a 7.065 at 188.40 mph.

BIKERNET ERRORS BIG TIME–Just checked your site to see if the bar I submitted, “The Brick” in Jonesville, Indiana had made it up yet, and I gotta ask, what the fuck are you guys doing? For description you guys are calling it a gay bar. So, again…what the fuck? Not only is that NOT the description I sent, but you’re insulting one of the coolest little hole-in-the-wall joints in Southern Indiana.

This little greasy spoon is a blue collar hang out on the weekend, gravel parking lot, bikes all over the grass kinda spot. Most people who discover it consider themselves lucky to sit down to a few cold ones and one of the best cheeseburgers you’re gonna find anywhere. It then becomes their favorite destination when they’re looking to rack up a few miles on the weekend.

So, I obviously don’t appreciate the description one of the assholes working for you saw fit to include. If it’s a joke, I sure don’t get it.

The Brick’s phone number is 812-522-8636, why don’t you give ’em a call and see if you can do a little better, or take that blasphemy down altogether. Do the right thing, Bandit.

— Harley Guy

If two groups are posting hangouts at the same time they can overlap. We’ll correct it and kick the Digital guys ass.

HARLEY DRAG RACING & SHOWBIKE EVENT Maryland International Raceway (MIR) is the latest addition to the growing list of 2006 events to run the AMDRAGS Harley drag race and AIMSA showbike series.

Scheduled for September 9 and 10, 2006, this two-day event at MIR offers something for every Harley rider and enthusiast. The AMDRAGS racing for seasoned drag racers, the all-brands the all-brands Thunder Alley Race School for anyone wanting to learn the basics of drag racing, and grudge racing for street riders.

In addition, there is the AIMSA custom and classic bike show, a huge Crossbow Productions swapmeet and dozens of vendors in the midway. Plus there is plenty of parking and only one admission ticket per day.

Here is your chance to meet the famous racers and showbike builders, or to try your hand at drag racing on a world class drag strip.

Maryland International Raceway is located in Mechanicsville, less than 2 hours from Washington DC and Baltimore.

PAGAN CASE OVERTURNED–Stafford County residents Joseph Wayne Eastridge and Joseph Nick Sousa are breathing easier these days.The two men, former members of the Pagans motorcycle gang who spent more than 20 years in jail for a crime they didn’t commit, found out Monday that their legal troubles are behind them. The government has dismissed an appeal that would have reversed their exonerations.

“The truth has finally prevailed,” Eastridge told The Free Lance-Star yesterday afternoon. “Tuesday morning, I just broke down and started crying. It was like my soul was weeping.”

Tomorrow, they will meet with their lawyers to discuss how the government can give them back the years they lost.Channing Phillips, a spokesman for the U.S. attorney’s office in Washington, did not return phone calls seeking comment yesterday.

In a highly publicized 1976 trial that became known as the Pagans murder case, Eastridge and Sousa were convicted of the first-degree murder of a 26-year-old man, Johnnie Battle in Washington.

The men were sentenced to 20 years to life in the death of Battle, who died after being stabbed numerous times on Nov. 1, 1974. His killing followed an argument at the Godfather Restaurant in Washington.

Eastridge, who is now 59, served 29 years in prison before being released on parole in March. Sousa, 57, served 20 years.

Both men found out on May 26 that U.S. District Judge Rosemary M. Collyer had cleared them by granting a petition for habeas corpus, meaning the constitutional legality of their convictions had been overturned.

Fellow Pagans member Michael Diamen was also convicted, but died in prison of a massive heart attack in December 2002.

Although testimony varied during the 1976 trial, most witnesses agreed that events started with an exchange of words between Battle and his friends and members of the motorcycle group. They said Battle returned to his car and fired a handgun that wounded a Pagan’s member. Battle was then chased down and stabbed 17 times.

Sousa and Eastridge admit they were both with the group when the altercation began, but said they returned to their car before Battle was killed.

Another Pagans member, Stephen C. Jones was sentenced under the District of Columbia’s youthful-offender act and served just a few years in jail. He later admitted to being present during the murder and testified that neither Eastridge, Sousa or Diamen were involved.

Eastridge said he has no hard feelings toward Jones, who could have saved them from jail had he told the truth at the 1976 trial.”It took a long time, but he came forward and told the truth,” he said. “I thank him.”

According to court documents, Collyer found that the evidence in the 1976 trial was flawed.

The Free Lance-Star, VA
–from Rogue

MICHIGAN: Branch County motorcycle riders will get a ticket if riding without a helmet–Motorcycle riders without helmets will be ticketed and can be convicted in Branch County again after the City of Coldwater won an appeal of a District Court decision.Branch County Circuit Court Judge Michael Cherry ruled on Thursday the state legislature is clear and unambiguous in its statute that requires those riding cycles to wear helmets.”We will leave to another day the issue of what helmets might comply with the law,” Cherry said from the bench.

Coldwater Daily Reporter, MI – COLDWATER
–Rogue
Motorcycle Hall Of Fame Member 2005

BIKE CLIENTS VENT FRUSTRATIONS–A dozen angry customers got the chance Friday to personally ask former Mid-West Choppers owner Chip Miyler the two questions that have been on their minds for months: Where are our bikes and where’s our money?

Customers of the now bankrupt motorcycle shop filled a courtroom in the Knox County Courthouse during two bankruptcy hearings for Miyler and his wife, Chrissy.

Nearly 40 people from across the United States and some from Germany and New Zealand have filed complaints against the shop, claiming they were asked to pay large amounts of money shortly before it went bankrupt in October.

Galesburg police said Friday the total amount of the complaints is about $1.2 million.”Where’s the money?” asked Michigan resident Rick Klepek, who said he paid Miyler $33,000 for a custom chopper he never received.

“It’s expensive doing business,” Miyler said after a moment of searching for an answer.

Miyler cited buying parts, salaries for his employees and $80,000 per year for insurance. “That eats it up pretty quick.”Miyler filed for bankruptcy on the business on Oct. 14, while he and his wife filed for personal bankruptcy the next day.The business had $2,315,325 in liabilities and $635,382 in assets, while the couple had $1,633,221 in liabilities and $354,287 in assets, according to bankruptcy filings.

Since the hearings were being taped by a single audio recorder on the table in front of Miyler, complainants were forced to sit directly next to Miyler as they asked their questions, making for several awkward moments with no eye contact.

“I guess if I was a very good business man, I wouldn’t be in bankruptcy court,” Miyler said in response to Klepek’s questions regarding financial record keeping.

Miyler previously said the bankruptcies were caused by hard economic times and a downturn in business, but Klepek disagreed, saying the money for the bikes and parts was paid upfront.

An FBI agent interviewed each customer as they exited the courtroom, trying to determine if Miyler ever intended to finish the motorcycles when he accepted the money.If police find Miyler took the money without plans to finish the motorcycles, he could face federal fraud charges.FBI agents and police have focused heavily on one such case they believe proves fraud more than any other.Virginia resident Tye Himmler said he met with Miyler at the shop on Oct. 5 and gave him a $14,000 check to begin work on a custom chopper.

Himmler said the check was deposited on Oct. 7 and cleared his bank account on Oct. 11, just three days before Miyler filed bankruptcy.

Miyler said he used $10,000 of that money to pay off an existing debt and not to buy parts for Himmler’s bike.Miyler also said he first contacted an attorney about filing bankruptcy on Oct. 8, three days after Himmler said he wrote the check.

While the couple had several different bank accounts, the main focus was on an account at First Bank in Galesburg. Miyler said he was required to submit a monthly statement of financial standing to the bank, but many questioned how a bank would continue to loan him money if he was so far in debt.

FBI agents are likely to investigate the transactions at the bank for any wrongdoing, police said. That investigation also would be handled at the federal level because banks are federally insured.

Miyler said he was making about $2,000 a week during the year before filing bankruptcy, but now he and his wife are living on $756 a week unemployment.”We live about as meek as you can get it,” Miyler said, because the two now drive two used cars and have no cable television.

But Mark Adamczak of Centralia didn’t shed any tears for the Miylers.Adamczak said he gave Miyler a 2001 Dodge truck, a 1998 Harley-Davidson and $21,900 in cash for a chopper that was never built.

“All I have is a bike payment of $700 (per month) for nothing,” he said.While the personal bankruptcy hearing was concluded Friday, the hearing for the business was stopped and will be scheduled for another date because so many people wanted to make a statement.

Peoria attorney Sumner Bourne represents 11 people, including those out of the country, and didn’t have enough time during the hour-long hearing to present his information.

Peoria Journal Star, IL – GALESBURG

–from Rogue

WILD CUSTOM FOR SALE–Here’s the bike from Demon’s South. If interested give them a call and be sure to tell them that Bikernet sent ya.

DEMONS SOUTH
378 SW 14 TH AVE
POMPANO BEACH
3 3 0 6 9 FLORIDA
954 629 1039
http://www.DEMONSCYCLE.COM

CHRISTMAS LUGGAGE RACKS– I sell Nelson-Rigg cruiser luggage and the Road King has an enormous back pad. the CTB 950 is made to accommodate the big backrest of the Road King and several other models, including the Yamaha Road Stars..

–Joe

The Harley-Davidson Road King? model is known for its distinctive styling and great looks. It also comes equipped with a huge passenger backrest. Now there is a sissy bar mounted luggage system specifically designed for the large backrests seen on some of big today’s cruisers.

This is the RiggPaks CTB-950 King Tourer
The CTB-950 has a larger mounting system to accommodate wider backrests as found on the H-D Road King)
Included roll bag can be mounted separately
Integrated pocket conceals straps turning your bag into a backpack
Four large easily accessible side pockets (2-expandable)
Detailed office organizer and envelope-sized pocket
Security loops under bag allow a cable lock to be installed (cable not included)
Dimensions: 14″L x 18 _”H x 8″W Unexpanded, 14″L x 18 _”H x 10″W Expanded.
MSRP $179.95
Available online at: http://www.amspecialtiesusa.com

BIKER INTERNET RADIO–It’s called the The Bikers Inner Circle and stars Bikernet’s correspondent, Rogue, Berry Wardlaw of Accurate Engineering and Charlie Brechtel, the music man.http://www.big7productions.com/

Coming soon on the internet.

–Rogue

HIGH DESERT TOY RUN FOR CHILDREN OF PRISONERS– Well our first toy run came off with out a hitch. We met at Hi Desert Performance, where the secret Bonneville bike is being built. Did our blast thru town. Then went to an old church and drop off our gifts to the kids. They did a short play and sang Christmas songs. They were all very grateful. It was a great turn out, more than Larry and I thought.

Then off to “The HandleBars” a local drinking hole down it the lower desert where it was a bit warmer.

Merry Christmas To All

–Bob T

HARDBIKES ANNOUNCES MOVE TO LONG TERM PRODUCTION FACILITY–MASURY, OHIO – December 17, 2005 — Hardbikes is pleased to announce their plans to move into a 35,000 square foot, long term facility in Hermitage, PA as of December 16, 2005. Hardbikes currently occupies an Innovation Center in Masury, Ohio where prototypes and assembly procedures have been developed. The move to Pennsylvania keeps Hardbikes growing and provides a long term home that can be expanded as needed.

Orders are inline with controlled growth plans. Hardbikes’ seasoned management team and recent successful milestones were the icing that sold the state of Pennsylvania.

“Pennsylvania’s business friendly policy and Penn Ventures’ investment into Hardbikes was a big confidence builder for the entire team and Hardbikes’ supply chain. By adding venture capital to the existing investors in Hardbikes we now have the mechanics to fuel our growth. The new investors and new plant is ahead of plan and has created some short term operational pains but we now have a good “HARD” foundation,” says Gene Kirila, president of Hardbikes.

The new facility is located at 2600 Kirila Drive, Hermitage PA and has 30,000 square feet of production space and 5,000 square feet of office space. The property has expansion capability to satisfy the needs of Hardbikes way into the future. It will house their innovation center and production facility under one roof. The increased space will also accommodate a dyno room testing lab, fully equipped prototyping facility as well as an increased inventory storage area to ensure the right parts are there at the right time. Hardbikes will be ready to start taking orders for their new custom bikes built to customer specifications after the first of the year. Hardbikes is looking to expand its dealers because of the new capacities.

Hardbikes’ customers design the custom bike of their dreams by using the online web-based Configurator that resides at www.hardbikes.com. Hardbikes’ design wizard helps the customer customize by leveraging the Hardbikes network of dealer and factory support expertise by being connected to the intelligent web-centric system. Customers are encouraged to experiment with their designs, budgets and unique look all from the privacy and comfort of their desktop. Then their designs are finalized by the Hardbikes network of dealers, designers, suppliers and quality engineers that provide years and years of proven knowledge.

Once customers design the bike of their dreams, Hardbikes builds motorcycles that fit each customer perfectly. Its patent-pending Hardrider system ensures each customer gets a bike built to their exact specifications. All Hardbikes dealers will have a Hardbikes Design Center on their showroom floor featuring a computer-aided design station, a Chopper fitment fixture, and a Pro-Street fitment fixture.

Hardbikes is committed to building a manufacturing process and selling system that will support the unique culture of the American V-Twin rider. The firm’s tagline is “Work hard, play harder.”

NEW MUSTACHE ENGINE GUARD FROM HARLEY-DAVIDSON–Curved Guard Incorporates Highway Pegs for Long-Haul Comfort.

MILWAUKEE (Nov. 30, 2005) – The new Mustache Engine Guard (P/N 49155-05, $239.95) from Harley-Davidson Genuine Motor Accessories offers a new twist on engine protection. The bend of this one-piece, chrome-plated engine guard complements the traditional style of Harley-Davidson Touring models. Its curved upper section incorporates a set of highway pegs with integrated rubber pads that offer a slip-resistant cushion while traveling the open road. The kit includes all required mounting hardware.

Fits 1997-later Touring models except FLTR and models equipped with Fairing Lowers.

For additional information on Harley-Davidson Genuine Motor Accessories, see your local Harley-Davidson dealer or visit the Harley-Davidson Web site at www.harley-davidson.com. To find a dealer near you, call toll free 1-800-443-2153 in the U.S.A. or Canada.

THAT’S A CHRISTMAS WRAPPING–Yesterday Steel Dreams sent a crew out to interview me and discuss our Bikernet Dreams for 2006. Shows are strange. Everything must be kept short and to the point. No long-winded stories allowed. I wanted to discuss our Bonneville efforts more, but supposedly they’ll be back for more updates as the bikes are built. Bikernet will be working hand in hand with Steel Dreams this year.

We are working with Custom Chrome, Accurate Engineering and Baker Transmission on the first Panhead Sport Bike designed by John Reed and myself for the Sturgis Run then speed runs at Bonneville during Bubs Salt Flats week. We’re also working on a 45 WLD bobber Bonneville racer with Lee Clemens and the Departure Bike Works crew. There’s also a V-Rod with Custom Performance in Phoenix and our own 1929 Peashooter, 500 cc single hanging fire for the next move. We’ll bring you progress reports.

I sincerely hope that every Bikernet reader has a helluva Christmas. Christmas means so many things to each of us. But from my heart and the hearts of our staff, Nyla, Karley, The Tronolone Brothers, Jason, John Gilbert, John Van (the kid downstairs), Rogue and the rest of the crew we hope your Christmas is fulla love, bling, giving, sharing and good times.

Ride Forever,

–Bandit

Continued From Page 1

CRAZYHORSE IS BACK ON BIKERNET– Just in case anyone thought I was gone for good, guess again. I’m still here, and so far I’m kicking. The above guitar was a tribute to legendary bike racer Jay Springsteen that I painted this fall. It’s been a long, crazy year. The traveling was brutal. As always the best traveling I did was on my bikes. Took a wild ride up to the Georgia Mts aboard my old sporty. Hooked up with a wild rider named Barb and proceeded to tear up a little road they call the Dragon’s Tail. Of course it took us all day to get there as we took the twistiest roads and finally got there just as the sun was setting.

After riding the Dragan twice, we poured on the throttle and hunched over the bars trying to get back to our motel, a 2 1/2 hour ride that we did in less than 2. It was so cold, at one point, going down the side of a mountain, I couldn’t even open my hand to grab the brake and had to shout at Barb to get out of the way as we pulled over.

Two weeks later we did it again, only we got lost going back to my house. Again hunched over the bars, trying to keep warm, in the pouring rain, in the dark, no tailight, large dead creature in the road comes out of the darkness. I had no choice but to pull up on the bars and ride over it.

Then came Sturgis and I hooked up with several friends, one of whom used to race, and I had way too much fun seeing just how far I could lean that gooseneck chopper over in the turns. Those were the bests parts of the year. Riding with friends. The rest was work and drama. The drama I can do without. The work, well, work is work.

All I know is that today I went into my paint booth for the first time in over a month and painted. Sure it was car parts, but soon I’ll be back to painting bikes and my world will be normal again. Well, as normal as a bike painter’s life can get. But it sure felt good today. being at my paint bench, mixing paint, cleaning guns.

My newest book is out. And people actually like it. I really tried to put 26 years experience in painting-hell into this book. Actually much of the bodywork hints came from a long dead friend who passed on his skills to me. Now I’m passing them on complete with photos. The basics from bare-metal to bodywork to trick basecoats. It’s has a heavy focus on bodywork and proper preparation for stress-free paint jobs.

One chapter covers molding a frame from start to finish. It even shows the process one bike takes from being a pile of fabricated bare metal through all the bodywork, base-paint, and artwork to become an award winning custom bike– soon to be featured in American Iron.

This book is an encyclopedia of how to prep and paint any kind of motorcycle part. Beginners can learn the right and easy way to get great results the first time.

Experienced painters can pick up a few new tricks to maybe make bodywork and painting a tad easier. There’s even a chapter that runs down, in great detail, the different kinds of paint, their pros and cons, and how to apply them from polyester to candy apple urethane. This is the only book out there that completely details how to mold a frame. Check it out at http://www.crazyhorsepainting.com/book.htm .

Meanwhile, Sara Liberte and I have started a blog. Look behind the scenes at the real world of bike painting and custom bikes. And it’s not just girly stuff although we have a female slant on it. Hey we are girls after all. Honest, funny, and real. http://femmefatales06.blogspot.com

And be sure to wander on over to Reader’s Showcase. Oh we got some killer Shovels this month. This very sweet chop belongs to CJ Brooks and it is a work of art. This little chop hails from Texas. And we got more. Must be Shovelhead month.

Ok, right now I’m finishing off my third book, “How to Custom Paint Cars.” Doing this book was brutal. I didn’t want it to be a copy of the custom bike painting book. And it is not. All three books feature different step by steps, different techniques. More about Book 3 in the coming weeks. Hope all you Horse readers liked my Sturgis story. I love riding out there. For me it’s about the riding, seeing my friends. Bike shows yeah, it’s cool to see killer bikes, but nothing beats laying that bike into the wind, feeling the rush as the pegs scrape the pavement. Coming up over the mountain and seeing the hills all lit up golden from the setting sun. Makes life worth living. Then getting silly with friends at night and riding by starlight.

Ya’ll have a great Christmas out there. Hope Santa brings you what ever you want.

300mm SOFTAIL KIT fromBIG BOAR PRODUCTS–Top quality components, economically priced, and available in a standard left side drive or right side drive, makes our kits stand out above the rest. This comprehensive kit includes a strut-less steel fender, super-wide swingarm , new left rear frame member, 300mm tire, and all the offset parts needed (some welding required). Price: $3395, less wheel of your choice. The right side drive kit includes a new polished 6-speed right side drive transmission, strutless steel fender, super-wide swingarm and 300mm tire. Price:$4995, complete kit less wheel of your choice.

Big Boar Products
http://www.bigboarproducts.com
6289 Corporate Park Drive
Loudon, TN 37774
Phone 865-458-8640

SANTA GIVES NOTICE–I regret to inform you that, effective immediately, I will no longer serve Georgia, Florida, West Virginia, Virginia, North and South Carolina, Tennessee, Mississippi, Texas, Ohio, Louisiana or Alabama on Christmas Eve. Due to the overwhelming current population of the earth, my contract was renegotiated by North American Fairies and Elves Local 209. As part of the new and better contract, I also get longer breaks for milk and cookies so keep that in mind. However, I’m certain that your children will be in good hands with your local replacement, who happens to be my third cousin, Bubba Claus. His side of the family is from the South Pole. He shares my goal of delivering toys to all the good boys and girls; however, there are a few differences between us.

Differences such as:

1. There is no danger of the Grinch stealing your presents from Bubba Claus. He has a gun rack on his sleigh and a bumper sticker that reads: “These toys insured by Smith and Wesson.”

2. Instead of milk and cookies, Bubba Claus prefers that children leave RC cola and pork rinds (or a moon pie) on the fireplace. And Bubba doesn’t smoke a pipe. He dips a little snuff, so please have an empty spit can handy.

3. Bubba Claus’ sleigh is pulled by floppy-eared, flyin’ coon dogs instead of reindeer. I made the mistake of loaning him a couple of my reindeer one time, and Blitzen’s head now overlooks Bubba’s fireplace.

4. You won’t hear “On Comet, on Cupid, on Donner, and Blitzen…” when Bubba Claus arrives. Instead, you’ll hear, “On Earnhardt, on Andretti, on Elliott and Petty.”

5. “Ho, Ho, Ho” has been replaced by “Yee Haw” And you also are likely to hear Bubba’s elves respond, “I her’d dat”.

6. As required by Southern highway laws, Bubba Claus’ sleigh does have a Yosemite Sam safety triangle on the back with the words “Back Off.”

7. The usual Christmas movie classics such as “Miracle on 34th Street” and “It’s a Wonderful Life” will not be shown in your negotiated viewing area. Instead, you’ll see “Boss Hogg Saves Christmas” and “Smokey and the Bandit IV” featuring Burt Reynolds as Bubba Claus and dozens of state patrol cars crashing into each other.

And finally,

8. Bubba Claus doesn’t wear a belt. If I were you, I’d make sure you, the wife, and the kids turn the other way when he bends over to put presents under the tree.

Sincerely Yours,

–Santa Claus

–From Phat98

BIKERNET READER REVIEW–Just had to say that Bikernet kicks ass. I can’t tell ya the amount of time I spend there. I’ve been w/bikernet for some time, but just wanted to say thanks for the good work. Don’t leave the girls alone too long. I always look forward to Thursday News and Sunday’s Post.

Oh merry x-mas,

–DjM

GREAT HAWAIINA BIKER BUILD-OFF-KUSTOM FAB TOOK THE HONORS–Hawaii’s first biker build off ended on Saturday December 17th at Honolulu’s Kapiolani Community College with Roger Kuwahara of Kustom Fab being crowned “The Big Kahuna”.

Beginning their builds in early September, Kuwahara and Las Vegas builder Shannon Aikau of Count’s Kustoms worked countless hours creating their contest submissions.

Along with their teams of competent, creative mechanics, the two motorcycle artisans employed every skill in their arsenals to produce bikes that would not only highlight the styles they are known for, but also to disrupt the very foundations of two-wheeled creation.

Shannon, armed with Count’s Kustoms trademark Sugar Bear Springer front end, and an uncharacteristic “big” 280 rear tire, complemented the 124″ S&S engine, and traditional flame paint job, which made the nearly 11′ long chopper awe inspiring, and undoubtedly the dream of thousands of Hawaii’s motorcycle enthusiasts.

Assembled in merely three days at Pacific Rim Cycle in Waipahu, Shannon’s build-off bike exemplifies raw power and classic lines. It wasn’t until Aikau broke the bike in on Oahu’s roads that everyone knew a beast had been unleashed in paradise.

In contrast to Shannon’s monster, Roger’s bike took the science of motorcycle building in a radical new direction. Known for his attention to detail, and theme building, Kuwahara went to the far reaches of his mind to create the “Fusion” bike.

Taking on the role of mad scientist, he employed a 92″ S&S Shovelhead to accompany 280 fat tire for stability, and one of the most radical paint jobs (by Cosmic Airbrushes Dennis Mathewson) to ever adorn a custom motorcycle. The motorcycle actually evokes thought and wonder. Why would someone go through all this trouble? Only Roger Kuwahara knows the answer to that question.

When the day of reckoning finally came last Saturday, over 1000 people voted on the two radical customs, and in the end, Kuwahara was presented the victor’s trophy.

Although only one builder can be crowned champion, there were actually three winners. Roger, Shannon, and Hawaii’s motorcycle enthusiasts.

The day was filled with great music, good food, cold beer, beautiful women, and some awesome motorcycles, and the thrill of being a part of Hawaii’s first biker build-off will be on the minds the throngs of spectators who came out for the days event. Like me, they are no doubt waiting on the next big show, but they (like me) will never forget the experience.

In early January, Hawaiian Chopper magazine will feature; in detail the builds of Roger Kuwahara and Shannon Aikau, and spectacle of The Great Hawaiian Biker Build-Off will live on in its pages. There will also be a DVD of the event released in February 2006, showcasing, in detail the builds and motorcycle event.

When all is said and done, The Great Hawaiian Biker Build-Off successfully highlighted two of the best up and coming names in the business of motorcycle building. The experience of friendly competition proved once and for all that motorcycles are art, and the builders behind the creations are genius.

To obtain a copy of Hawaiian Chopper magazine, or to purchase a DVD of the event, email Hawaiian Chopper at alohasports@hawaii.rr.com, or call 808-780-2998. You can also watch http://www.hawaiibuildoff.com for updates.

Aloha,

–Steve Kalnasy
Editor/Publisher
Hawaiian Chopper

MERRY CHRISTMAS FROM PAT SAVAGE BAND–From Pat Savage, Baukje Westerlaken and Petar Bashir collectively known as The Pat Savage Band, from our families to you & yours, we wish you a very happy and safe holiday season. The holidays are a time away from our daily grind, to hang out with family and good friends. A great time for reflection, and for giving thanks for all our personal blessings. We’ve had a very good year and we hope you had one too with all its ups and downs. Here comes 2006 and a whole new ball game!

Please come by for a scoot to the website and see and hear our music, read the latest news and say hey in our guestbook! You are our family, friends, fans and associates. Lets all have a great New Year! And to you who ride H-Ds… Keep On Rollin!

Happy Holidays and the best New Year!

–Pat Savage, Baukje Westerlaken, Peter Bashir
http://www.patsavage.net

Savageworks International
Ura 9 4056
Tananger Norway
Ph: +47 97 53 91 34
Fax: +47 51 82 95 45

NORTON MOTORSPORTS NOW TAKING ORDERS FOR PRODUCTION COMMANDO 961–Norton Motorsports Now Taking Orders for Production Commando 961Happy Holidays from all of us here at Norton Motorsports! What could say Merry Christmas better than a new Commando 961?

A letter from Norton President & CEO Bruce MurdockNorton Motorsports is taking deposits for the 2007 production Commando.

For over two years, Norton Motorcycles has been focused on the design and development of a great new Commando. We have struggled as we continue to fight the battle between financial pressures and building new Nortons that stay true to the brand.

Our current focus is execution of our test plan and the initiation of production processes.

In parallel, we are building a great business that can manufacture, sell and support at a level equal to the motorcycles themselves. One crucial component to our business planning is an accurate forecast of demand. To facilitate this, we are taking reservations for all 2007 production models including the Commando Signature Series, the Commando 961S and 961.

This is a great opportunity to become a partner in the rebirth of the Commando, as your reservation will help us take the next steps into the future of Norton Motorcycles.

Bruce Murdock
President and CEO
Norton Motorsports Inc.
http://www.nortonmotorcycles.com

Order Process and Details

We know you’ll have lots of questions so we put up a short list of FAQ’s to help you out. Please don’t hesitate to contact us directly with any questions.

How do I get one?
Place your deposit with Norton either online (click the link below) or by sending a request for a deposit agreement to rob@nortonmotorcycles.com. Print, sign and send it in to Norton at 17835 SE 82nd Dr. Gladstone, OR 97027 with your check for $500.

I sent in my check and signed agreement. Now what? Keep your eye on the mail. Norton will be sending you a commemorative hat, sweatshirt and plaque to keep you looking good until your bike arrives.

Norton will then contact you prior to the delivery of your bike and finalize your commitment with a sales agreement and down-payment. From there the bike will be delivered as production is allocated.

When will the bikes be available?
Production is scheduled to begin in mid 2007. Norton will build the 100 Signature Series bikes first followed by the Commando 961 and 961 S models.

How can I see one?
All current bikes are committed to testing and design validation. Check out our website for photos of the bike as well as the press section to read up on what the motorcycle media thinks.

How much will they cost?
The Commando 961 will sell for $10,995
The Commando 961 S will sell for $13,195
Complete spec’s are available on our website.

What happens to my money?
All deposits will be held in an escrow account. Should
you choose to cancel your deposit will be refunded in full.

Continued On Page 3