Tech

Once upon a time SoCal bike fan and design guru Jim Grove was looking for an easier way to find his Harley from amongst a parking lot full of look-a-like Softails. He also didn’t want to spend weeks waiting for the transformation. Call it instant gratification. He set about designing components that would both transform […]

Just a quick note to anybody who might find themselves in this spot. This is a problem I have never heard of before, and everybody who wrenches on EFI models, just goes, “Hmmm, haven’t heard that one before.” So, here is the fix, if it happens to you. I have a 2002 FLHT Fuel injected

Before buying a new Master Cylinder from Performance Machine and plumbing it to the stock factory Caliper from that 1996 Sportster you have to consider the hydraulic ratio between the two components.To explain hydraulic ratios we have to re-visit high school physics. It all comes down to one formula: Pressure = Force/Area. So if you

Check Them Out. Question of the week with Ross Racing Pistons One of the most frequently asked question we get, is. How do you install ring properly.So here goes. Top Rings :Molybdenum faced, barrel lapped, ductile spheroidal graphite iron. Phosphate coated, or gas nitrite steel barrel faced. Second Rings :Grey cast iron, reverse torsional twist,

This article doesn’t have a damn thing to do with the machine shop, but this illo sure helps. Just about the two top things on my “to-do” list are ride motorcycles and listen to music that rocks. Beth Orliss’s company, Hearing Dynamics, had me in mind when they developed custom radio headphones exclusively for motorcycle

Editor’s note- This is from a long time reader and contributor to Bikernet, Anson Alexander, also one of our friends. He is a regular family man like many of us out there who enjoy riding when we can and always appreciate a little more power. He is a former Buell rider who has upgraded to

The photography in this tech sucks, so I thought I’d start it off with a bang from RFR, a hot Texas photog.In the fall of 2004 I semi-retired from racing drag bikes and needed a two-wheeled fix. I found a sweet ‘80 Shovelhead rigid on an EBAY ad but was beat out of it by

You guys know that the ol' TBear is always on the look out for fresh young talent. I like up and coming craftsmen who haven't yet been corrupted by the glamour of the Discovery Channel or the high dollar bling-bling that festoons every bike lined up at Stoogis. Just regular guys, who do what they

Our finished wheels, after lacing, with the “new” powder coated rims. Note the nice finish on the powder coating. Editor’s Note: Here’s another tech from the expert tech books publishing empire of the Wolfgang. The following, Chapter 4, tech about lacing bobber powder-coated wheels came directly from the Publisher’s new book, “How To Hop Up

Here's a rare shot of the house where the Devil was born in Transylvania. Today we’re hanging out at Lucky Devil Metalworks in Houston, Texas where the Devil, Kent Weeks, is chopping a stock Harley-Davidson Dyna. To add the necessary heft to the rear of this custom, the D is using Big Boar Products’ new