Tech

Departure Bike Works on Hull Street in Richmond, Virginia recently celebrated their 33rd birthday. Lee and Brenda Clemens have lived by the Code of The West (so they're in the South), and the Chopper code for over three decades. They’ve built a family within the shop, a family of customers on the outside and a […]

This is how you can finish a seat using one of my PANS FOR LIFE pans (PFL) First Thing is to cut the center out to fit the inner edge of a PFL pan. Tracing:Next step is to lay the leather on the PFL and tape it in place. Next step is to trace the

Can I get you a beer before you start reading?Bandit,Been reading your shit almost as long as you have beenwriting it. Decided to build another bike, so Idismantled my daily commuter. It’s a '97 Buell M/2cyclone, probably one of the most RIDEABLE cycles to reside in my garage in 40 years of riding. I guess

Built and photographed by Cyril Huze. One of the Ten Commandments of custom bike building is “Keep it Clean,” an overall philosophy that also figures into the design concept that greatness is in the details. Another commandment is “Keep it Functional.” Both concepts are well apparent in the internal handlebar controls offered by Custom Cycle

This is the Big One, my first tech tip on Bikernet. In the process we got to add more chrome to Bandit’s Road King, that he’s worked so hard to blackout. This product was so straight forword, I’ll just jump into what you need to get the job done. Dish Soap Needle Nose Pliers 13/32

Click to see morefrom Lucky Devil Pay attention, guys.Recently we received the following letter and immediately followed up. “We have developed a Gerotor oil pump that bolts right onto evolution engines,” Bret Barker said, “to give them twin cam style oiling. We have just run it on our test bench atthe shop. We are getting

The Halibrand Special by Conder CustomIt started life as a 2006 Softail Springer with the 200mm back tire, provided by House of Thunder Harley-Davidson in Morgan Hill CA. Outfitted with the first set of Conder/Halibrand Hot Rod wheel adapter hubs and Halibrand Sprint wheels.17×6 rear and 17×5 front, chevy bolt pattern. Sheetmetal, bracketry, overall modification,

Just before rolling out and leaving for Sturgis I check my plugs in the only stock item left on the 93-inch House of Horsepower/S&S hot rod Shovelhead—the early heads. Unfortunately every time I attempted to unscrew the short reach plugs the threads and heli-coil came with them. I rode to Sturgis without ever checking the

I just finished recording some snap shots of the “57 Tracker” tanks that belong to the bike you are sponsoring.We're stoked to have you on board, and look forward to taking some snaps of you throwing roost on your sponsor bike.Sometimes I just feel like doing something, anything, just not the same thing. Just something

Hey Man, Just thought I would let you know, my web store is now open ! I have attached Lone Star article # 2 with photos, the K & P oil filter, a bad ass oil filter that I will be selling. The filter will be in the store by this Sunday. I will be