Skip to main content
Tag

wind

Savings for Dad from WindVest

By General Posts

Happy Father’s Day

WindVest Motorcycle Products wants to pass on the savings for your Dad!! Take 20% Off on all in stock items now until June 24th.

WindVest fits a variety of motorcycles from Harley to Honda and many in between.

If you don’t find what you’re looking for, give us a call.

Our email: sales@windvest.com

Visit our website www.windvest.com for these deals.

Can you Ride with a Pet on your Motorcycle?

By General Posts

ASK A TROOPER: “Motorcycle Riding Dog”
by Ryan Janke from https://kfgo.com/

Question: Can someone with a motorcycle permit have their small dog riding on the motorcycle or would that be considered a passenger? We have already purchased a helmet and leather jacket for this lucky pup! Thank you for your response.

Answer: First of all, where will this dog be seated and how? I see less issues if you are talking about a motorcycle side car or a motorcycle trailer equipped with a kennel. But if you are talking about on the actual motorcycle with you, I don’t think this would be very safe for you or your pet.

If you are going to carry a passenger, there are a few key items to keep in mind:

Equip and Adjust Your Motorcycle:

  • A passenger seat and footrests are required by law.
  • Adjust tire pressure and suspension settings for the additional weight. (Do not exceed weight limitations specified in the owner’s manual.)
  • Readjust mirrors.

Passenger Preparation:

  • Provide protective riding gear: eye protection, a DOT-approved helmet, boots, gloves, long riding pants and a high-visibility motorcycle jacket.
  • Passengers under age 18 are required by law to wear a DOT-approved helmet.
  • Small children are required by law to be able to reach both footrests with their feet while sitting on the passenger seat.

Getting On and Off the Motorcycle:

  • Start the engine before the passenger gets on.
  • Squeeze the front brake while the passenger gets on or off the bike.
  • Passengers should get off the bike before the operator.

Passenger Safety Tips:

  • Hold operator’s waist or hips, or motorcycle’s passenger hand-holds.
  • Keep feet on footrests at all times, including while stopped.
  • Keep hands and feet away from hot or moving parts.
  • When turning, look over the operator’s shoulder in the direction of the turn.
  • Avoid turning around or making sudden moves that might affect operation.
  • If crossing an obstacle, rise off the seat keeping your feet on the foot pegs with knees slightly bent and allow legs to absorb the shock upon impact.

Operator Safety Tips:

  • A passenger will affect handling due to extra weight and independent motion.
  • Braking sooner with greater pressure may be necessary.
  • Use extra caution in a corner.
  • Allow more time and space for passing.
  • Be ready to counter the effects of wind.
  • Avoid extreme speeds and dramatic lean angles.

If you have any questions concerning traffic related laws or issues in Minnesota, send your questions to Trp. Jesse Grabow – Minnesota State Patrol at 1000 Highway 10 West, Detroit Lakes, MN 56501-2205. (You can follow him on Twitter @MSPPIO_NW).

Get ready for Adventures with unique design of Bandit’s Bedroll – Weekend Rides or a whole Week – easy reach essentials & separate section for must-carry tools. You won’t find such a riding product anywhere. Old school has its perks. CLICK For New 5-Ball Racing Shop!!!

REVIEW: Tourmaster Synergy Pro-Plus Riding Apparel

By General Posts

Heated 12V Jacket & Pant liners and Glove Liners

Review & Photos by Koz Mraz

This riding apparel offers comfort against the weather conditions on the road.

The apparel wiring connectors are a standard design and will work with other brands.

The Synergy Pro-Plus line of jacket, vest, pants, and gloves all work together.

CLICK HERE To Read this Review on Bikernet.com

Check out the Cool Tech, Tips, Reviews and more in the Cantina

CLICK HERE To Subscribe for exclusive content from 25 years of reports

Royal Enfield Successfully Completes Quest For The South Pole

By General Posts

90° SOUTH – Quest For The Pole is a success! Two riders successfully trekked across Antarctica to the South Pole on Royal Enfield Himalayan motorcycles.

90° SOUTH – QUEST FOR THE POLE, first-of-its-kind expedition on Royal Enfield Himalayans, commemorates 120 years of adventure and exploration on motorcycles.

Milwaukee, WI (Wednesday, December 22, 2021) – Royal Enfield, the world’s oldest motorcycle brand in continuous production since 1901, has tested the endurance of man and machine time and again, and last week, it made history once again by successfully completing the 90° SOUTH Expedition, the quest for the South Pole on the Royal Enfield Himalayan. This extraordinary endeavor is a tribute to the brand’s 120-year commitment to pure motorcycling, and to the courage and resilience of countless riders and explorers who have made history on two wheels.

On December 16, 2021, two riders Santhosh Vijay Kumar and Dean Coxson reached the geographic South Pole in 15 days, making the ambitious attempt a reality.

The team arrived at Novo in Antarctica from Cape Town for four days of acclimatization, loading of supplies, checking equipment and the motorcycles. From Novo, the team covered an overland distance of 3200 km (1988 miles) over the next 9 days braving extreme weather conditions with temperatures between -30° to -25°C (-22° to -13°F) and wind speed of 60 km/h (37 mph), towards Ross Ice Shelf.

The Royal Enfield Himalayans and crew arrived at the geographic South Pole on December 16, 2021. (The team is in communication via satellite phone, hence the low-resolution image.)

The Ross Ice Shelf was the designated start point for the riders, however, an unexpected blizzard forced the team to alter their course. Instead of starting the ride from 86 South, the team started the 400-km (250-mile) ride from 87 degrees South. Despite a few initial roadblocks and a slight detour, the expedition team completed the quest by reaching the South Pole on December 16, 2021.

For this expedition, two Royal Enfield Himalayan motorcycles were modified in-house, with functional upgrades to be able to navigate snow and ice, and function under extreme conditions in Antarctica. The motorcycles were ridden on a compacted snow track from the Ross Ice Shelf to the South Pole, to reduce motorcycle drag and limit emissions to an absolute minimum. Royal Enfield is consciously ensuring no footprint is left behind by the expedition team except wheel tracks that will be quickly lost to snow drift. In line with our #LeaveEveryPlaceBetter initiative, the team is ensuring all waste including human waste is brought back for appropriate disposal.

The team is currently heading towards the western part of Antarctica, Union Glacier, from where they will fly out to Punta Arenas, Chile.

Minimal changes were made to the 90° SOUTH Royal Enfield Himalayans; smaller countershaft sprockets (15- to 13-tooth) increase low-end torque and stronger alternators enable the team to run heated gear.

About Royal Enfield
The oldest motorcycle company in continuous production in the world, Royal Enfield made its first motorcycle in 1901.

Studded tires, a tubeless setup and low tire pressure will only do so much–riding in snow is no easy task.

Royal Enfield North America (RENA) is headquartered in Milwaukee, Wisconsin, and is developing a growing network of more than 140 dealers in North America, including the contiguous U.S., Canada and Puerto Rico.

RENA currently offers the all-new Meteor 350, Himalayan and the 650 Twins (INT 650 and Continental GT 650) motorcycles, along with a range of Genuine Motorcycle Accessories and apparel.

For more information on Royal Enfield North America, visit www.RoyalEnfield.com/us/en/, www.Instagram.com/RoyalEnfield_NA, www.Facebook.com/RoyalEnfieldNorthAmerica.

Energy Poverty Kills

By General Posts

From Center for Industrial Progress by Alex Epstein

Last week we looked at the need for a process of producing energy that is cheap, plentiful, and reliable—and we saw that solar and wind cannot produce cheap, reliable energy.

How Germany embraced solar and wind and ended up in energy poverty

Let’s take a look at this in practice. Germany is considered by some to be the best success story in the world of effective solar and wind use, and you’ll often hear that they get a large percentage of their energy from solar and wind.

You can see here on this chart how this claim was made and why it’s not accurate.

First of all, this is just a chart of electricity. Solar and wind are only producing electricity and half of Germany’s energy needs also include fuel and heating. So solar and wind never contribute half as much to Germany’s energy needs as this chart would imply.

But that’s not the biggest problem. What you notice here is that there’s certain days and times where there are large spikes, but there are also periods where there’s relatively little. What that means is that you can’t rely on solar and wind ever. You always have to have an infrastructure that can produce all of your electricity independent of the solar and wind because you can always go a long period with very little solar and wind.

So then why are the solar and wind necessary? Well, you could argue that they’re not and that adding them onto the grid will impose a lot of costs.

In Germany, electricity prices have more than doubled since 2000 when solar and wind started receiving massive subsidies and favorable regulations, and their electricity prices are three to four times what we would pay in the U.S. (Because of its low reliability, solar, and wind energy options require an alternative backup—one that’s cheap, plentiful, and reliable—to make it work, thus creating a more expensive and inefficient process.)

Nuclear and hydro

Fossil fuels are not the only reliable sources. There are two others that don’t generate CO2 that are significant and are more limited, but still significant contributors. Those are hydroelectric energy and nuclear energy.

Hydroelectric energy can be quite affordable over time, but it’s limited to locations where you have the right physical situation to produce hydroelectric power.

Nuclear is more interesting because nuclear doesn’t have the problems of hydro but it’s been very restricted throughout history so today in the vast majority of cases it’s considerably more expensive than say electricity from natural gas. This may change in the future and one thing we’ll discuss under policy is how we need to have the right policies so that all energy technologies can grow and flourish, if indeed the creators of those technologies can do it.

The reality of energy poverty: a story

To illustrate just how important it is to have cheap, plentiful, and reliable energy, I want to share a story I came across while doing research for my book, The Moral Case for Fossil Fuels. This is a story about a baby born in the very poor country of Gambia.

The baby was born underweight and premature, but not in such a way that would be a big problem in say, the United States. In the United States, the solution would have been obvious: incubation. This technology would almost certainly bring this baby up to be completely healthy, and if you met the baby later in life you would never know that there had ever been a problem.

Unfortunately, in the Gambia, in this particular hospital, they needed something that billions of people in the world do not have, and that is reliable electricity.

Without reliable electricity, the hospital didn’t even contemplate owning an incubator, the one thing this baby desperately needed to survive.

Without access to this technology, the baby could not survive on her own, and sadly, she died. I think this story reminds us of what it means to have access to cheap, plentiful, and reliable energy, and how having more energy gives us the ability to improve our lives.

To summarize what we discussed, if you can’t afford energy you don’t have energy, and if energy is scarce or unreliable, then you don’t have energy when you need it. It’s not just enough to have energy, the energy and the process to create it has to be cheap, plentiful, and reliable.

Energy Clarity: Our need for cheap, plentiful, reliable energy

By General Posts

By Alex Epstein From Center for Industrial Progress

When making energy choices, there are three major criteria that need to be considered:

1. Is it cheap? Simply put, if you can’t afford energy, then you don’t have energy.

2. Is it plentiful? If energy is scarce, then many people will have little to no energy.

3. Is it reliable? If energy is unreliable, then you won’t have it when you need it.

In other words, energy is only valuable to the extent that it is cheap, plentiful, and reliable.
And to make it that way, we have to discover cheap, plentiful, reliable processes for generating energy.

Energy is a process

Energy is a process. Whether it’s coal, oil, gas, solar, wind, we describe them as materials, but they’re really processes. The materials are just one part of the process, but the whole process can include things like mining, refining, manufacturing, transportation, operation, maintenance, and disposal.

And then you have to look at how the whole process adds up. When we see something in the marketplace being cheaper or more expensive that reflects the whole process.

The general reason why certain forms of energy are not adopted is because the process to produce them is too expensive or it’s not reliable.

Let’s look at some examples of this.

Jimmy Fallon’s irrefutable case against “renewables”

For this first example, I’m going to let comedian Jimmy Fallon do the talking.

“New Scientist Magazine reported on Wednesday that in the future, cars can be powered by hazelnuts. That’s encouraging considering an eight ounce jar of hazelnuts costs about nine dollars. Yeah, I got an idea for a car that runs on bald eagle heads and Faberge eggs.”

So you may be thinking, “Isn’t hazelnut energy renewable? Doesn’t it come from the sun? Isn’t the sun free and forever? What’s going on here?” It’s all about the process.

While we don’t have to pay the sun, we do have to pay for the land, the labor, and many other inputs necessary to make hazelnut energy. And with hazelnuts, the process to produce them is very costly. The same turns out to be true for many alternatives.

Airlite Lowers – form & function & durable

By General Posts

Soft Lower Leg Warmers? It’s not the ’80s anymore
Story & Photos by Koz Mraz
https://www.kozmoto.com/

Engine Guard Lowers, Engine Chaps, Rain Guards, Soft Farings…Leg Warmers? Whatever you want to call those things that go on engine guards to stop the rain, cold air, wind, and flapping pant legs from sanding the hair off your calves.

Sometimes you want the airflow, sometimes you don’t. There are a plethora of options and they all come in two parts, left side, right side, just like those 80’s leg warmers—except one. Airlite’s one-piece, full cover soft lowers can be installed and removed quickly.

There are many reasons riders need soft lowers. They cut down the cold wind and rain, keeping boots and legs dry. They can extend your riding season so you can cruise earlier – cruise later – cruise longer – cruise safer.

Because of its one-piece design, Airlite claims that air is captured, screened, and directed exactly where it belongs; into the radiator and/or cooling fins. They also claim that wind buffeting around your upper body is reduced. They’re efficient and form-fitting in the highway bar cover with no gaps, so there’s no cold and wet wind slapping onto the rider.

The soft lowers are constructed with vinyl used on car bras which means they can be in the sun and wind 24/7 and don’t harden and crack like upholstery vinyl. The soft woven fabric backing material makes it impossible to tear or rip.

The screen is made of a heavy-duty mesh for bug and rock chip protection. It’s the same material that dump trucks use to cover loads. Poly webbing that snugly surrounds the bars is also used in seat belts. Airlite uses the same nylon thread employed in aircraft upholstery and a computerized long arm sewing machine allows for topstitching.

With a background in aviation, owner Bob Morris has designed his soft lowers to be extremely durable and uses all U.S materials. These things seem indestructible and he claims to have never had a defective or damaged lower returned.

Optional storage pouches are available on one or both sides. As stated, fitment is a snap. There are in fact no snaps, clips, or zippers, just Velcro where you need it and it comes with a stowaway bag.

In the real world, Soft Lowers are leg warmers. The radiant engine heat reflecting off the back of the soft lowers creates warm air vortices noticeably increasing the ambient air temperature behind them.

The Airlite soft lowers look and function flawlessly. It’s easy to install, will stop the rain, bugs, and rocks and stows easily away when unused.

Airlite has a soft lower that’s specifically made for almost every bike and year.

Price Range: $94.95 to $126.95

https://www.airlite.ca/

Check out their website for choices and options.

Indian Motorcycle introduces 2022 Lineup

By General Posts

  • Indian Motorcycle introduces 2022 Lineup featuring Updated Technology.
  • New Ride Command Update, Adaptive Headlight for Scout.
  • All-New Accessories for Cruiser, Bagger & Touring.
  • Prices, Paint and Specs announced.

“Rider feedback continues to be at the forefront of what drives refinements and enhancements for our model year offerings, and that is once again the case for 2022. With the help of customer feedback, we aim to consistently enhance and improve the lineup with new technology and wider-ranging accessory options like these for 2022.” – Mike Dougherty, President for Indian Motorcycle

CLICK HERE To See the Full 2022 Indian Motorcycle Lineup Info and Photos.

Join the Cantina for more – Subscribe Today.

https://www.bikernet.com/pages/custom/subscription.aspx