Tuning

Vance & Hines’ 2022 Event Tour and Arizona Bike Week

General Posts / By

Arizona Bike Week is Next Stop on Vance & Hines’ 2022 Event Tour Company has expanded its event list as more riders plan to hit the road this year Santa Fe Springs CA – April 7, 2022 – Vance & Hines rally trucks roll again this week, continuing the company’s plans for an expanded slate of events in 2022. After a successful event in the sunshine and rain of Daytona Bike Week, the big rig and crews head to Arizona Bike Week, where they will set up at Westworld of Scottsdale for the four-day event. The 2022 Vance & Hines event schedule includes the top v-twin motorcycle rallies in the country, like Sturgis, Myrtle Beach Bike Week, Biketoberfest, Bikes, Blues & BBQ and Delmarva Bike Week. These rallies provide riders the opportunity to engage directly with factory representatives to see and hear the latest in Vance & Hines performance products. What’s more, Vance & Hines partners with local Harley-Davidson dealers and v-twin specialists, J&P Cycles, for sales and installation of Vance & Hines exhaust systems, air intakes and tuners at each venue. With the popularity of Vance & Hines mini-moto products for the Honda Grom and Monkey, Vance & Hines will also return to Barber Small Bore in June, the ultimate mini-moto festival at Barber Motorsports Park, home to the Barber Vintage Motorsports Museum in Leeds, Alabama. The expanded 2022 tour includes some new stops as well. Capitalizing on the company’s launch of exhaust systems for popular ADV bikes, Vance & Hines will display and install exhausts at the Get On! ADV Fests in both the Mojave Desert in California and the Black Hills of South Dakota. “We’re stoked about the number of events on our calendar this year and we expect to add a couple more as the year […]

Vance & Hines’ 2022 Event Tour and Arizona Bike Week Read More »

Ride to the Moon: Motorcycle Adventures in Argentina

General Posts / By

Behind the scenes in Argentina: Ride to the Moon Argentina: vast open spaces, salt flats, lunar landscapes and Andean peaks towering over 4,500 m altitude. You’ve been asking us about it since our very first tour across the Himalayas back in 2006: “Since the Himalayas, I can’t stop thinking about Argentina. When will you take us there, Vintage Rides?” Expectations are running high for this legendary destination. So, challenge accepted! 😉 Alexane and Simon: the dream team During the summer of 2021, Simon suggested entering into partnership and opening a Vintage Rides office in the heart of the Andes. “I have been riding here for more than 10 years and know the region like the back of my hand. I have hundreds of unexplored tracks under my belt, ready to design new tours. I knew it was time for me to set something up”. A friendly, enthusiastic biker, he is smitten with his adoptive country and its culture and shares many common values with us. We speak the same language. So we decided to take him up on his offer and set up Vintage Rides Argentina together with the headquarters in Salta, in the north of the country. At the mercy of nature, which reigns supreme, the tracks are constantly changing. While the borders were closed, Simon had all the time in the world to do what he loves most: criss-cross the tracks, try out all the roads and uncover the best places, which you won’t find on Google maps – believe us, we’ve tried! From the Lyon office, Alexane is on hand to help get the joint venture up and running. She’s been thrown in at the deep end: she’s only just joined us at Vintage Rides and she’s opening a new office in Argentina! That’s a big adventure

Ride to the Moon: Motorcycle Adventures in Argentina Read More »

AHDRA to Remember “Nitro Santa” with Gainesville Opener

General Posts / By

event: AHDRA Don “D.J.” Johnson Nitro Spring Nationals sponsored by MTC and Gainesville Harley-Davidson when: April 1-3, 2022 where: Gainesville Raceway, Florida, USA Only a legend like the late Don “D.J.” Johnson could bring out the Top Fuel Harley-Davidson community like what is expected at the AHDRA season opener at Gainesville Raceway. Named in honor of the man known worldwide as the “Nitro Santa,” the inaugural Don “D.J.” Johnson Nitro Spring Nationals sponsored by MTC and Gainesville Harley-Davidson will be a historic event in nitro Harley drag racing. So defending AHDRA Top Fuel champion Ryan Peery will have his hands full at this event, and the whole year as well. The thundering, flaming, nitro Top Fuel bikes are expected to flock to AHDRA races this season like never before. And when memorializing the legend that was D.J. headlines the event, you can expect racers from all over the world to come pay high-peed homage. That includes Japanese H-D dealer Tak Shigematsu—famous for his record-breaking kamikaze attacks down the quarter mile aboard D.J.’s supercharged monster. Two-time NHRA champs Randal Andras and Tii Tharpe will be there, both riding alongside their team boss Jay Turner—a multi-time, multi-sanction champion himself. 2020 AHDRA champ Rich Vreeland will be in the house, along with Bad Apple Racing’s Tracy Kile and Dr. Jimmy “Mac” McMillan. Tim Kerrigan will have some help from legendary builder/tuner/rider Mike Romine to put his and teammate Frank Velasco’s beautiful bikes in the winners circle. Chris Smith, Billy Jackson, and Dean Communal will be back on track, and Rebel Glover will again be on Jake Stordeur’s Knucklehead Racing bike. So while Peery will have to be on top of his game, he proved what he can do by winning both the AHDRA and AMRA championships last year and damn near winning the

AHDRA to Remember “Nitro Santa” with Gainesville Opener Read More »

Vance & Hines Reveals FP4, Its Next Generation Engine Control Module Tuner

General Posts / By

Upgrades include the latest Bluetooth technology, smaller size, upgraded app and tuning capability for new Harley-Davidson models Santa Fe Springs CA – February 25, 2022 – Vance & Hines today announced the FP4, the next generation of its industry-leading engine control module (ECM) flash tuning products. The FP4 features an all-new circuit board, case, firmware and mobile app, all of which were designed and manufactured in Santa Fe Springs, California. The FP4 brings greater control and optimum performance tuning to Harley-Davidson Touring and Softail models because it’s the only app-driven tuner in the market. “We know riders want the best setup for their Harley-Davidson, just like we do for our race bikes,” said Vance & Hines President Mike Kennedy. “Think about it, the bike’s stock ECM is set for a stock exhaust and factory air intake. When you make changes, like adding a different exhaust or air intake, you need the right tune to get the full performance potential out of your engine.” The heart of the Vance & Hines FP4 is the ability to dial-in the motorcycle’s ECM tune to match the performance upgrades that a rider adds to their motorcycle, such as an aftermarket exhaust system and a high flow air intake. Owners of the FP4 may choose from a vast library of Vance & Hines maps created in the company’s dyno-tuning lab in California. Vance & Hines maps are model-specific and are created using actual parts on real motorcycles, not projections made from previous tests. Owners can further develop those maps with a number of customization options found in the FP4 app. The Vance & Hines FP4 unit has a slimmer and smaller case and a longer wiring harness than its predecessor, Fuelpak FP3, allowing more options for locating the hardware on the motorcycle. It features simplified

Vance & Hines Reveals FP4, Its Next Generation Engine Control Module Tuner Read More »

Dave Currier, aged 68, on Winning Cannonball riding his 1911 Harley-Davidson

General Posts / By

by Kevin Wallevand from https://www.inforum.com Fargo man wins Motorcycle Cannonball with 1911 Harley Davidson Dave Currier turned 68 years of age on the road while racing in the Motorcycle Cannonball Earlier, Dave Currier had been a runner-up in 2018 Motorcycle Cannonball riding a 1915 Harley-Davidson His father sold Indian and Harley motorcycles in the 1940s and 50s in Fargo and also raced them Dave Currier credits John Rouland of Northern Crankshaft in Thief River Falls for doing a lot of the technical and engine work on his 1911 H-D “To start it, you have to pedal to start it, it is a belt drive. To move it forward, you have a lever which tensions the belt and the bike moves forward.” – Dave Currier Fargo man wins Motorcycle Cannonball with 1911 Harley Davidson A Fargo man has just won a cross country motorcycle run called The Motorcycle Cannonball. Dave Currier is finally getting some feeling back in his rear-end. He is back in Fargo after competing in the most difficult, antique endurance race in the world: The Motorcycle Cannonball. “I think this has been the toughest ride of my life,” Currier said. “It is a real grind, I had about eight hours in the saddle every day.” Riding his 1911 belt-driven Harley Davidson, Currier and 88 competitors crossed 11 states over 16-days straight. From Michigan to South Padre Island, Texas, they racked up just over 3,700 miles. “The bike is tall. I have short legs, so my feet don’t touch the ground,” Currier said. “To start it, you have to pedal to start it, it is a belt drive. To move it forward, you have a lever which tensions the belt and the bike moves forward.” But Currier, who had a team planning and tweaking this bike, not only competed;

Dave Currier, aged 68, on Winning Cannonball riding his 1911 Harley-Davidson Read More »

Harley-Davidson XL Sportster 1957 & the OHV Engine

General Posts / By

The XL commonly known as the Sportster. The original XL Sportster used a lot of parts from the previous K Model, but the real revelation was its new OHV engine. Harley-Davidson was aware of the interest of buyers in customizing. While the humble XL Sportster had made an impact of sorts upon its initial release in 1957, it was the continual evolution of this lighter-weight V-twin engine that cemented it as a staple in the Harley-Davidson range. It has truly helped instill the Harley-Davidson name in motorcycle history. Click Here to Read this Feature Article on Bikernet.com Join the Cantina for more – Subscribe Today. https://www.bikernet.com/pages/custom/subscription.aspx

Harley-Davidson XL Sportster 1957 & the OHV Engine Read More »

Pandemic Panhead Project: Part 3 Tuning

General Posts / By

It was a lesson in Frustration on Several Fronts I’ve built a number of bikes and maybe I was just lucky. With the Pandemic not so lucky. Trouble getting it started in Sturgis, so we brought it home and sent the Morris Magneto back to Deadwood Custom Cycles for a check-over. Click Here to read this Tech Article on Bikernet. Join the Cantina – Subscribe Today. https://www.bikernet.com/pages/custom/subscription.aspx  

Pandemic Panhead Project: Part 3 Tuning Read More »

Screamin’ Eagle Pro Street Tuner and Automatic Tuning Model

General Posts / By

Tuning Done The Right Way by Dale Your average biker that has a Harley usually adds some customization to the bike not leaving it stock very long. And if they are a gear head, usually the first thing they do is take off the stock exhaust and upgrade to something that is louder and throatier. With fuel injection you can make some minor changes to the exhaust or air cleaner but not both at the same time without the need for re-tuning the motorcycle. There are plenty of aftermarket solutions for this but if you’re like me riding a new motorcycle you will void your warranty if you do. CLICK HERE TO READ THIS TECH ARTICLE

Screamin’ Eagle Pro Street Tuner and Automatic Tuning Model Read More »

Scroll to Top