Skip to main content
Tag

essential

Can you Ride with a Pet on your Motorcycle?

By General Posts

ASK A TROOPER: “Motorcycle Riding Dog”
by Ryan Janke from https://kfgo.com/

Question: Can someone with a motorcycle permit have their small dog riding on the motorcycle or would that be considered a passenger? We have already purchased a helmet and leather jacket for this lucky pup! Thank you for your response.

Answer: First of all, where will this dog be seated and how? I see less issues if you are talking about a motorcycle side car or a motorcycle trailer equipped with a kennel. But if you are talking about on the actual motorcycle with you, I don’t think this would be very safe for you or your pet.

If you are going to carry a passenger, there are a few key items to keep in mind:

Equip and Adjust Your Motorcycle:

  • A passenger seat and footrests are required by law.
  • Adjust tire pressure and suspension settings for the additional weight. (Do not exceed weight limitations specified in the owner’s manual.)
  • Readjust mirrors.

Passenger Preparation:

  • Provide protective riding gear: eye protection, a DOT-approved helmet, boots, gloves, long riding pants and a high-visibility motorcycle jacket.
  • Passengers under age 18 are required by law to wear a DOT-approved helmet.
  • Small children are required by law to be able to reach both footrests with their feet while sitting on the passenger seat.

Getting On and Off the Motorcycle:

  • Start the engine before the passenger gets on.
  • Squeeze the front brake while the passenger gets on or off the bike.
  • Passengers should get off the bike before the operator.

Passenger Safety Tips:

  • Hold operator’s waist or hips, or motorcycle’s passenger hand-holds.
  • Keep feet on footrests at all times, including while stopped.
  • Keep hands and feet away from hot or moving parts.
  • When turning, look over the operator’s shoulder in the direction of the turn.
  • Avoid turning around or making sudden moves that might affect operation.
  • If crossing an obstacle, rise off the seat keeping your feet on the foot pegs with knees slightly bent and allow legs to absorb the shock upon impact.

Operator Safety Tips:

  • A passenger will affect handling due to extra weight and independent motion.
  • Braking sooner with greater pressure may be necessary.
  • Use extra caution in a corner.
  • Allow more time and space for passing.
  • Be ready to counter the effects of wind.
  • Avoid extreme speeds and dramatic lean angles.

If you have any questions concerning traffic related laws or issues in Minnesota, send your questions to Trp. Jesse Grabow – Minnesota State Patrol at 1000 Highway 10 West, Detroit Lakes, MN 56501-2205. (You can follow him on Twitter @MSPPIO_NW).

Get ready for Adventures with unique design of Bandit’s Bedroll – Weekend Rides or a whole Week – easy reach essentials & separate section for must-carry tools. You won’t find such a riding product anywhere. Old school has its perks. CLICK For New 5-Ball Racing Shop!!!

Different Types of Fire Extinguishers for your Workshop

By General Posts

Different types of Fire? Yes !
Know the Class Category for Fire Extinguishers

by Keith Dooley and Roger Tunsley from ehow.com

Auto garages are full of electrical equipment, gasoline, oil and chemicals, any of which can cause or make a fire worse.

For this reason, it is best that your workshop is equipped with relevant type/s of fire extinguishers to deal with different types of fire.

Fires are classified by the type of material that’s burning.

There’s a broad international agreement on fire classifications in Australia, Asia and Europe.

But the American classifications differ.

CLICK HERE To Read this key Tip for your DIY Workshop or full-fledged Garage business.

Stay updated with important motorcycle news, products, events and tech – SUBSCRIBE to
Bikernet FREE Weekly Newsletter – CLICK HERE

Eight Tools to Up Your Home Workshop

By General Posts

Queen of Brat Style working on her Panhead

Essentials to flip into high gears inside your Garage

by Kyle Smith from Hagerty.com

We all started somewhere, and for most of us garage-dwellers, it was a set of sockets and screwdrivers.

From there we progressively acquired tools to complete tasks and projects until we reached a point where there wasn’t a project to be scared of.

A big part of that is the mental toolbox, but the physical tools in your hands or on your bench can be critical in deciding if you are able to take on a project.

We took a look around the garage and rounded up these eight tools that we recommend for a budding DIY enthusiast.

CLICK HERE To Read this Tech Tip to up your DIY game

Subscribe to our Free Weekly Newsletter to stay updated on Motorcycle news, tech, market, products, reviews, events & fun

CLICK HERE and subscribe to the Newsletter – try it once, unsubscribe at anytime

Energy Clarity: Our need for cheap, plentiful, reliable energy

By General Posts

By Alex Epstein From Center for Industrial Progress

When making energy choices, there are three major criteria that need to be considered:

1. Is it cheap? Simply put, if you can’t afford energy, then you don’t have energy.

2. Is it plentiful? If energy is scarce, then many people will have little to no energy.

3. Is it reliable? If energy is unreliable, then you won’t have it when you need it.

In other words, energy is only valuable to the extent that it is cheap, plentiful, and reliable.
And to make it that way, we have to discover cheap, plentiful, reliable processes for generating energy.

Energy is a process

Energy is a process. Whether it’s coal, oil, gas, solar, wind, we describe them as materials, but they’re really processes. The materials are just one part of the process, but the whole process can include things like mining, refining, manufacturing, transportation, operation, maintenance, and disposal.

And then you have to look at how the whole process adds up. When we see something in the marketplace being cheaper or more expensive that reflects the whole process.

The general reason why certain forms of energy are not adopted is because the process to produce them is too expensive or it’s not reliable.

Let’s look at some examples of this.

Jimmy Fallon’s irrefutable case against “renewables”

For this first example, I’m going to let comedian Jimmy Fallon do the talking.

“New Scientist Magazine reported on Wednesday that in the future, cars can be powered by hazelnuts. That’s encouraging considering an eight ounce jar of hazelnuts costs about nine dollars. Yeah, I got an idea for a car that runs on bald eagle heads and Faberge eggs.”

So you may be thinking, “Isn’t hazelnut energy renewable? Doesn’t it come from the sun? Isn’t the sun free and forever? What’s going on here?” It’s all about the process.

While we don’t have to pay the sun, we do have to pay for the land, the labor, and many other inputs necessary to make hazelnut energy. And with hazelnuts, the process to produce them is very costly. The same turns out to be true for many alternatives.