Bikernet Banner

Updating the Bikernet Experience

Hey, Here’s the deal. We’ve worked and spent an entire year to move all Bikernet Free Content (16,000 articles) onto a fast-acting, mobile-friendly, google accessible, WordPress Platform. ...
Read More

June 29, 2006 Part 1

BIKERNET NEWS HEADLINES –IT BE HOT, NEW BAKER CLUTCH, WIN A REVTECH ENGINE, BILLY LANE BUILD-OFF, BIKERNET ANNIVERSARY IS REAL, BIKER POSTAL TRUCKS, NEW SPRINGERS, RUBY THURSDAY, CALIFA HELMET LAW LIMBO, STROKERS STURGIS RETURNS AND BANDIT BEDROLLS RULE,

sam d cutie behind

From Sam Dixon Photography

HEY,

Yep, it’s hot, humid, steamy and grizzly. My computer smokes as I hammer the keys drastically trying to finish the news. All the powder for my V-120-inch Sportbike Panhead is curing overnight for pick-up tomorrow.

Accurate banner

Berry Wardlaw called yesterday to give me an update on the Accurate Engineering Engine. “We were considering aluminum rods. We’re upping the compression another notch and installing pork chop flywheels,” Berry said. “Remind me never to get involved in another Build-Off.”

Let’s hit the news and I’ll fill you in on the girls and the 45 flathead with the K-model top end, later:

9-plate-logo1

THE BAKER STREET PERFORMANCE 9-PLATE CLUTCH–HASLETT, MI,For those who are looking for a great replacement to his OEM clutch. BAKER Drivetrain an improved solution. Available this summer, the BAKER Street Performance 9-Plate Clutch offers many upgrades.

9-plate-clutch2

Features:

of the new BAKER clutches is the 1-piece starter ring gear AND clutch basket – an industry first! Black phosphate-coated 8620 gear steel for smooth pinion-to-ring gear engagement and friction plate stick-slip reduction. Ring gear is 23% thicker than stock manufactured to AGMA 8 or better. Available in 66-tooth starter ring configuration.

Torque capacity (Rear wheel) up to 125ft-lbs.
Nine Kevlar friction plates for 71% more friction plate area than stock
One piece starter ring gear/basket for superior structural integrity
Clutch hub is hard anodized
Single snap ring installation: No disassembly of plates necessary
Chain sprockets are available with 35, 36, 37 or 38-teeth
Diaphragm style clutch spring makes holding the clutch open easy
Designed to fit your stock Big Twin
Basket and Pressure Plate is hard anodized laser blue

For additional information, go online to www.bakerdrivetrain.com.

baker banner

EVIDENCE THAT BIKERNET EXISTS–Mr. White here. I was perusing through my mag collection when I happened across the July 1996 Easyriders. I was reading your ‘Short strokes” section and noticed you had announced launching Bikernet only the week before. I thought that was pretty cool.

Anyways, keep up the work and I am proud to be a part of it. I knew it had been ten years, but it was cool to find the original announcement. Pretty cool. I am sure you have the issue, but I would send it to you if you wanted it.

Also, I’m waiting on a new assignment, boss. I have still heard nothing from Big Dog.

–Johnny

USPS Trucks1

CUSTOM STURGIS POSTAL DELIVERY TRUCKS–Here is a copy of the trucks the USPS will be tooling around in during the Rally. They are really quite enthusiastic about it!

See the USPS stamp story in Special Reports. You can see the bikes featured on the collectible stamps at the Sturgis Museum this August.

donald parks frontend

NEW SPRINGERS AVAILABLE–Just to let you know I have TWO new, Parks Custom Springer, models coming out. One is the all tubing front end. It does not have triple trees. I’m deputing it on John from Wicked Bros bike. The other is a retro. it has curved rear legs and I’ll be doing one for ELL form Vegas City Choppers!

— Brian
Donald Parks
parkscustomspringers@hotmail.com

Ruby for Kc1

DAVID UHL TO ENHANCE “RUBY” FOR KIDS & CHROME EVENT– June 2006 – – In 1998, David Uhl was licensed by Harley-Davidson to help capture the nostalgia and rich history of The Motor Company. The motorcycle art world has never been the same.David was the only Harley-Davidson painter to be commissioned to do two pieces to celebrate the 100th Anniversary in 2003. “The Enthusiast” was featured on the February 2003 cover of Enthusiast Magazine and quickly became the most popular and best-selling print in the history of the company’s fine art program.

David’s work resides in the homes of celebrities such as Jay Leno and in countless museums and galleries throughout the world. He has been featured on CBS Sunday Morning, which referred to him as “The Norman Rockwell of Harley-Davidson artists” and most recently on Speed Vision.

In 1998, David Uhl created “Ruby”. A masterpiece set in 1926, she immediately captured her audience with an intensity like no other work of motorcycle fine artLong sold out, the canvas and paper “Ruby” prints are still in great demand. The canvas serigraph prints, available in 1998 for $750 each, have recently been valued as high as $7,500.

David has agreed to create a one-of-a-kind canvas “Ruby” for Kids & Chrome. He will be painting over one of the last 2 remaining press proofs of Ruby, resulting in a truly unique original work. The image is 27″ x 17″ and painted over a canvas giclee. The work comes with a hand written letter of certification describing the uniqueness of this piece. “I am very honored to participate in this event, fostering such a worthwhile cause. I sincerely hope Ruby can rally her popularity here to promote a great endeavor”.

To see “Ruby” and learn more about David and his collection of artwork, visit http://www.art-inc.biz/david_gallery.html.

For more information about Kids & Chrome visit www.kidsandchrome.com

KIDS & CHROME 2006 BANNER

CALIFORNIA HELMET LAW UPDATE ON COURT RULING–Quigley had his day in court again, seeking relief from the helmet tickets he received in Santa Cruz County. The judge explained he could dismiss the tickets, and that would be the end of it. Nothing would prevent the CHP or other enforcement agencies from writing more tickets to Quig or anyone else. Quig stated he wants the law gone, For everyone. Bottom line, the judge is not sure he has authority to issue an injunction, or exactly how or what form to do it in. So he is asking for help from Quig and his legal team, and the judge will also research this. The DA objected and wanted the tickets dismissed of course, so business as usual could continue.

The judge has asked the parties to return on Bastille Day (July 17) and he will rule or issue the injunction then if he has authority. It’s mind boggling how the DA wants to proceed and ignore the injunction language in the Easyriders case, which comes up several times.

You can read the actual transcripts at www.usff.com/print and scroll down to 062306 transcript. PDF and click.

I’m going to research the Michigan case cited from 2003, which found their law unconstitutional. Quig keeps chipping away at the California law, without much outside help. Let’s hope he has time to make it fall.

–Pan

rick fairless

RICK FAIRLESS RETURNS TO STROKERS STURGIS IN ’06 WITHMORE BIKES, BABES, AND BEER–Dallas, TX (June 14, 2006)- As a follow up to last year’s success, Rick Fairless and the gang from Strokers Dallas will return to the Sturgis Motorcycle Rally for their second year at their ‘home away from home’: Strokers Sturgis. Located in the 40,000 square feet venue at Thunder Road, Strokers Sturgis is a piece of the ‘Big D’ all the way up in the Black Hills of South Dakota. This year the joint will be even bigger, with more bikes, babes, and beer than any other place in Sturgis.

As the “Custom Capitol of Sturgis,” Thunder Road is the perfect match for Strokers. Owned and managed by SBW Productions, the place has everything a true Rally go-er could ask for. With lots of cool customs on display, bikers can come in and buy a cold beer from a hot babe, order some hearty food from the bar, and chill out to some good tunes. Once again, the place will be decked out in true Rick Fairless style, with plenty of his collected memorabilia, vintage signs, and lots of posters and pictures on display. New this year, the bar will stay open until midnight all week serving beer and playing live music, allowing everyone to get the most out Strokers Sturgis.

“We’re very excited about our second year at Strokers Sturgis. Last year was a huge year and this year will be bigger and better,” Fairless said. “Sturgis is all about bikes, babes and beer, and I think we have it all. I also have several new customs I will be showcasing this year, so since we’re staying open late, I want to see people hanging out longer and having fun.”

GLENCOE BANNER
Strokers Sturgis will continue to be the Rally version of Rick Fairless’ Strokers Dallas, a multi-million dollar operation that includes a motorcycle and parts store, an on-site fabrication shop, apparel and gift shopping, and Rick’s infamous Beer Joint: Strokers’ Ice House. Strokers has been voted the best all-around biker hangout in Texas, and Fairless hopes to continue the popularity up in South Dakota.While riders are hanging out at Strokers Sturgis, they can also check out the other exhibits and bike shows in and around the Thunderdome. Attractions include Michael Lichter’s annual art exhibit, the AMD World Championship of Custom Bike Building, the Metzler Custom Bike Show, Discovery Channel’s Biker Build Off with Twisted Chopper and the Detroit Bros, the Biker-Penthouse bike show and Build-Off, and finally, the Rat’s Hole Custom Bike Show. Also, as if the beer tub babes of Strokers aren’t enough, Thunder Road will also be host to Miss Sturgis and the Texas Bikini Team.

bed roll

Click her for more info on the Day Roll and Bed Roll!

BANDIT’S BEDROLL AND DAY ROLL TESTIMONIAL–Just wanted to let you know that I used both the dayroll and bedroll for a road trip this past weekend (was headed to the Horse SO but never made it). I love them – one of the best “parts” I’ve bought for my chopper

Only have one suggestion. There should be a velcro’d flap over the zipper – that’s the only place that rain got in. I’ll just put plastic over my stuff next time

–Rich M

Hey Rick, I’ll look into more rain proof options. You too can buy a famous Bandit’s Bedroll by clicking on the Black Market banner below. Thanks, Bandit

HOT ACES REVTECH BANNER

100Polished

ON LINE, ALL CLASS GAMBLING AND YOU COULD WIN A $7000 ENGINE–A HOT new RevTech engine for $50.00!!! That’s right, Bikernet and Hot Aces Casino are sponsoring a contest to win a new $7,000 HOT ROD, REVTECH engine. Just go to www.hotacescasino.com register, make a $50.00 deposit* you will then have a chance to win this great engine. Not only that, but make your $50.00 deposit and Hot Aces Casino will add an additional $25.00 bonus. So $50.00 = $75.00=A chance to win a new engine and who knows perhaps a jackpot or royal flush or a great day at the tables!!!

Click here www.hotacescasino.com register, make your $50.00 deposit and enter the code ENGINE. You will be automatically entered into the drawing. Drawing to be held July 14, 2006.

REVTECH BANNER

*see promotion terms and conditions at www.hotacescasino.com

sam d pitbull

From Sam Dixon Photography

BIKERNET MARRIAGE ADVICE–An 80 year old woman was arrested for shop lifting. When she went before the judge he asked her, “What did you steal?” She replied: a can of peaches.

The judge asked her why she had stolen them and she replied that she was hungry.

The judge then asked her how many peaches were in the can. She replied 6.

The judge then said, “I will give you 6 days in jail.”

Before the judge could actually pronounce the punishment the woman’s husband spoke up and asked the judge if he could say something. He said, ” What is it? “

The husband said “She also stole a can of peas.”

BL wheel stop3

BILLY LANE VS. RUSSEL MITCHELL BUILD-OFF BLASTED TO AN END–Billy’s 5th Biker Build Off is now complete. He was up against Russell Mitchell from Exile Cycles in CA. For the build off Billy built an amazing hubless wheel bike. He had some special guests join him during the build that helped him to create one if his most amazing bikes to date.

Billy and Russell rode from Chicago to Laconia, NH. Along the way lots of interesting things, things you will have to see to believe happened, you won’t want to miss the show. Billy’s bike caught fire and Russell broke his ankle. Don’t miss it.

The air date has been set. Please be sure to mark your calendars and tune in. Discovery ChannelMonday, Aug. 7, @ 9 p.m. ET/PT (Billy’s episode kicks off season 3)

–Darcy

GIVEAWAY ILLO

BIKERNET.COM FREEBIES—This week we give away another ?Worlds Fastest Indian? DVD. That leaves one more to give away next week, and that?s all we got. Not to worry, we have so many other cool things that we?re gonna get rid of. Posters, Easyrider collector plates, Monster Garage Series 2 box set, OCC DVD box sets, I know you all want that, and much, much more?

Worlds Fastest Indian DVD cover

The winner of ?The Worlds Fastest Indian? DVD is:

William Moore from Greensboro
Wanted: Damn near anything, but a copy of “the Worlds Fastest Indian” will do

And from our free section we chose:

NELSON CITTA from LAKE CITY, FLORIDA
Suggestion: HOW ABOUT MAKING SOME DECALS OF THE TWO BONNEVILLE TEAM EMBLEMS FOR SALE TO RAISE THE MUCH NEEDED FUNDS ??

That is a good idea, Nelson and we are currently having some made.

Remember, you can?t win if you don?t enter. You must be a Cantina member to enter for the WFI DVD, however anyone can enter in the free area. Bandit and I have been tossing around the idea of getting rid of the contest in the free area, only having the one in the Cantina as a perk for members. We send the carrier pigeon with this idea to Digital Gangster today and he makes the final decision. You’ll know what he decided if it’s gone…

Layla

Bonneville banner

Click Here To Be A Sponsor

Continued On Page 2

Read More

June 22, 2006 Part 4

BIKERNET NEWS ALERTS -NEW HOLLYWOOD BARS, TRUE-TRACK SAVES, BLIND BIKERS, FXR FOR SALE CHEAP, SCREAMIN EAGLE RACE STATS, AVON TYRE TECH QUESTION OF THE WEEK, STROKERS DALLAS AT THUNDER ROAD IN STURGIS, AND LUCKY DEVIL UPDATE

Continued From Page 3

goofy broads

ULTIMATE SERVICEMAN DEAR JOHN LETTER RESPONSE– You gotta love a man like this, Humor in the face of defeat.

A Marine was deployed to Afghanistan. While he was there he received aletter from his girlfriend. In the letter she explained that she hadslept with two guys while he was gone, and she wanted tobreak up with him. AND, she wanted pictures of herself back.

So the Marine did what any squared-away Marine would do.He went around to his buddies and collected all the unwanted photos ofwomen he could find. He then mailed about 25 pictures of women (withclothes and without) to his girlfriend with the following note:

“I don’t remember which one you are. Please remove yourpicture and send the rest back.”

–from Joe Lankau

Hollywood Bobber Bars2

HOLLYWOOD BOBBER BARS–Check out these slick new HOLLYWOOD BOBBER BARS. Manufactured by Paughco and currently available exclusively through JAMMER’S HANDBOOK, the latest trend in custom handlebars is the hot ticket for today’s HOT SCOOTERS.

Fit with a curved cross bar for added rigidity and that BOBBER effect, the bars are 1″ in diameter and have 4 1/4″ on center mounting holes.

Designed for use with Paughco and OEM springers HOLLYWOOD BOBBER BARS come finished in flawless Paughco chrome or gloss black and are designed for use with external control cables and custom headlight installations.

Call 800-729-3332 or visit http://www.customchrome.com/

Paughco Banner

BIKERNET STANDING IN LINE PHILOSOPHY–A bus carrying only ugly people crashes into an oncoming truck, and everyone inside dies. As they stand at the Pearly Gates waiting to enter Paradise and meet their maker, God decides to grant each person one wish because of the grief they have experienced.

They’re all lined up, and God asks the first one what the wish is. “I want to be gorgeous,” and so God snaps His fingers, and it is done.

The second one in line hears this and says “I want to be gorgeous too.” Another snap of His fingers and the wish is granted.

This goes on for a while with each one asking to be gorgeous, but when God is halfway down the line, the last guy in the line starts laughing.

When there are only ten people left, this guy is rolling on the floor, laughing his head off.

Finally, God reaches this last guy and asks him what his wish will be. The guy eventually calms down and says:

“Make ’em all ugly again.

NEXT TIME YOU’RE LAST IN LINE. BE HAPPY.

–From CarlR

GIVEAWAY ILLO

BIKERNET.COM ? CANTINA CONTEST WINNER!!–OK, Bikernet has two contests; one in the free area and one in the Cantina. Right now I?m giving away three copies of ?The World?s Fastest Indian? DVD in the Cantina drawing. Today I picked the first winner and the lucky duck is:

Paul Destito from Hobe Sound , Florida

I have two more copies that I?ll be giving away next week and the week after that so ENTER IN THE CANTINA!! (Must be a Cantina member to enter- duh.)

Worlds Fastest Indian DVD cover

Not to leave out those of you who don?t want to become members and support our site, (thanks to those who do), we also have the winner from the Free section.

MARTIN MATANIC (BUTCH) from MORRISTON, FLORIDA
Suggestion: THERES’ NOTHING MORE PLEASING TO THE EYES THAN BEAUTIFUL BIKES AND BEAUTIFUL NAKED WOMEN (NOT NECESARILLY IN THAT ORDER)HOW ABOUT ADDING MORE WOMEN BY HAVING YOUR OWN BEAUTY CONTEST. BASE IT ON ONE OVERALL CATEGORY OR MULTIPLE ONES, EXAMPLE TITS, ASS?
Wanted: A SET OF 3-1/2 GALLON TANKS FOR MY ’99 SOFTAIL .

Martin, congratulations on being the winner in the free section, you win a box set of Monster Garage DVD?s!!! (not what you asked for unfortunately) However, in answer to you suggestion, there are naked women and cool bikes in the CANTINA. So join if you haven?t already.

Till next week – Layla

TRUE-TRACK BANNER

TRUE-TRACK TOURING FRAME TUNER TESTIMONIAL–Just got my True Track stabilizer link and installed it on my 1999 FLHRC-I. Installation is a breeze… Takes about 15-20 minutes.Inventor is a super person to talk with and very helpful.

Now to the results…Been out riding for several hours. At slow speeds, she handles like a smaller, more nimble bike. Much more responsive than without the True-Track. At highway speeds, the bike feels tremendously more stable and responsive. Going over the edge of road patches or tar snakes doesn’t cause the rear to feel like it’s on ice.

I’m off tonight for a spin on some back roads with known bumpy curves that used to cause a really high pucker factor.

So far, I’m thoroughly impressed and it’s well worth the price. The bike no longer feels like a 1,000 lb bear……more to come after the bumpy curve ride!

Background

I first noticed my bike wobbling when banking hard (about 70MPH), getting onto the Interstate and I hit uneven pavement. For a couple of seconds I thought I was going down. It never got to a tank slapper stage, but it was oscillating so bad, I had to pull over and check my underwear. That turned out to be a bad rear tire, but after replacing the tire I began to notice that every time I went into a bumpy curve or ran over uneven pavement the rear end would give a little shimmy.

I checked everything, frame alignment, fork nut adjustment, fork oil, rear shock air pressure, motor mounts, tires, tire pressure, spokes… Nothing was wrong or out of proper adjustment. After much frustration, someone posted the reason that FLs wobble… The rubber mount system. The rear swingarm is also attached using rubber bushings which allows the swingarm to get out of verticle alignment with the frame and front tire briefly when banking or during quick corrections. Many people may never notice it, but mine apparently was amplified or I am just extra sensitive to it.

Here’s the link that I was given:http://www.bikernet.com/garage/PageViewer.asp?PageID=776

If you’re having wobbling or handling instability on your FL, it is well worth the bucks. I do suggest that you check everything that I checked to be sure that there is not another problem as well.

abate of wisconsin

WEIRD NEWS: BOLD MOTORCYCLISTS RIDING BLIND– “I live for this,” shouted VIP Charlotte Gotz over the distinctive rumble of an idling motorcycle. “I love Harleys,” she told Greater Milwaukee Today for their article “Visually Impaired Passengers Feel The Thrill Of Open Road”

The wind on their faces and scenery roaring past, VIPs (Visually Impaired Persons) rode along with members of ABATE of Wisconsin and West Bend and Hartford Harley Owners Group chapters for a BOLD (Blinded Outdoor Leisure Development) outing. The Richfield Lions Club supplies the VIP riders, and ABATE with the help of local HOG chapters, bring the bikes.

“They’re gutsy,” said Andrew Olson of the BOLD passengers he’s had over the past five or six years he has participated. “They’re getting on with somebody they don’t know, they don’t know the road, what’s around the next curve or where they’re going,” said Olson, a member of the West Bend HOG Chapter. “I would’ve thought it would be terrifying, but everyone I’ve ever taken with me knows how the bike handles, the countryside – their other senses are developed.”

When VIP and BOLD Director Marty Hutchings is asked why he enjoys the annual ride, he replied, “the feel of the wind in your hair, the open road, the freedom you have. It’s something any biker would tell you.”

–Bill Bish

full right

DEAL OF THE WEEK, FAMOUS SHRUNKEN FXR FOR SALE–That’s right the famous Bikernet Shrunken FXR, designed for the smaller rider is FOR SALE.

This bike was specifically designed for the smaller rider. It’s a rare, Bandit built, one-off custom motorcycle-all new. Only $28,000 obo, (310) 830-0630,

screamin eagle

SCREAMIN’ EAGLE RIDERS MAKE RARE EARLY EXIT AT NHRA EVENT AT OLD BRIDGE TOWNSHIP RACEWAY PARK–ENGLISHTOWN, N.J., (June 18, 2006) – Screamin’ Eagle/Vance & Hines riders Andrew Hines and GT Tonglet have each earned a trip to the final round at NHRA events at Old Bridge Township Raceway Park at one point in their careers. Sunday’s K&N Filters NHRA SuperNationals wasn’t a day for repeat performances.

For the first time this season both V-Rod entries suffered first round losses. Hines – the 2004 winner of this event – lost to Ryan Schnitz. Hines turned in a 7.173-second pass at 186.25 mph, falling to Schnitz’s 7.149 at 180.48 on the Team Muzzy Buell. Tonglet lost to Matt Guidera. Tonglet went 7.168 at 187.05 to Guidera’s 7.148 at 185.36 on the Rocklin Motorsports Buell.

HD newline racer 1

“We never want to make excuses for this team, but the weather really threw us for a loop,” Tonglet said. “During Saturday’s qualifying it was actually cool and not humid at all. We woke up Sunday and it was hot and humid. We just didn’t make enough changes to accommodate the atmospheric conditions.”

Hines qualified in the No. 7 spot, the lowest he has qualified since the final event of 2004 (12th in Pomona, Calif.). Hines recorded a best pass of 7.045 at 190.06 in qualifying. Tonglet was 11th in qualifying with a 7.085 at 189.95.

“We struggled in qualifying and that carried over to Sunday,” Harley-Davidson Racing Manager Anne Paluso said. “It’s unfortunate, but it happened and it’s over. Now we need to think about what we can do differently to produce better results next weekend.”

The next stop for the entire NHRA POWERade Series is the O’Reilly NHRA Midwest Nationals at Gateway International Raceway in Madison, Ill., just outside St. Louis. Qualifying starts Friday, which doesn’t leave much time for the team to prepare.

“I’m happy we don’t have a lot of time between races because it means we can redeem ourselves quickly,” Hines said. “Englishtown has been a bittersweet track for me. I think I used up all of my luck here in 2004 when we set the national record, took the top qualifying spot and won the race. I guess we will have to wait to come back next year and turn it around.

HD newline race2

“Thankfully, we’ve done well in St. Louis and it’s nice to know that we are going to be back on the V-Rods in a couple of days. I don’t want the team’s first round losses to linger longer than it has to.”

Matt Smith earned the event victory, beating Karen Stoffer in the final round.

BIKERNET QUOTE OF THE WEEK– “Government’s view of the economy could be summed up in a few short phrases: If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”

–Ronald Reagan, 40th President of the United States (1911-2004)

Avon Banner

AVON TYRE TECH QUESTION OF THE WEEK–How load and speed are related in the tire world?

A V rated tyre is rated to 149mph sustained speed. However, after 130mph, the load the tyre can take reduces by 5% for every 10kmh increase in speed up to 149mph.

Max Speed Max Load (%)
190kmh (118mph) 100
200 (124mph) 100
210 (130mph) 100
220 (137mph) 95
230 (143mph) 90
240 (149mph) 85

Therefore, as the speed increases above 130mph, the load reduces. These tyres are drum tested (ECE reg 75 conditions which are more severe than DOT high speed conditions) for ten minutes at each speed but with a different percentage load due to take account of the fact the tyre is running on a curved drum rather than on a flat road.

avon speed rating

This is why if you run a tire at sustained high speed with too heavy of a load you can wear out a tire quickly. It’s also important to make sure you are running the correct tire pressures.

–Sukoshi Fahey (Ms.)
Sales Manager, North America
http://www.avonmotorcycle.com/

THUNDER ROAD STURGIS BIKE WEEK LOGO

Thunder Road “The Custom Capital of Sturgis” has more Bike Shows, Babes, Beer, and Vendors Four Years Running–

Strokers2

Sturgis, S.D. – For the fourth year in a row, during 2006 Sturgis Bike Week, Thunder Road will be the custom capital of Sturgis. Thunder Road will have more bike shows, babes, and beer than anywhere else in Sturgis. This year, the 40,000 square foot Thunderdome will be host to the AMD World Championship of Custom Bike Building, three major bike shows, and Michael Lichter’s “School’s Out; Old School, New School, All(s)Kool” exhibition, which will highlight the industry’s best builders and motorcycle artists. As always there’s plenty of free motorcycle parking at Thunder Road.

Thunder Road has grown over the last four years into the custom capital of Sturgis with custom bike builders, manufacturers, and high-end parts companies on the lot. In addition to vendors, the prestigious AMD World Championship of Custom Bike Building will be held from Saturday, August 5th through Monday, August 7th. The fourth annual Metzler Custom Bike Show will be held on Tuesday, August 8th. Thursday will once again be host to the Biker/Penthouse bike show and Build-Off, an event that is sure to be a huge hit. The week will end on Friday with the ever-popular Rat’s Hole show. All these events will draw the top builders in the world, and there is no better place to showcase their world-class bikes than at Thunder Road.

“The Journey continues at Thunder Road” with Michael Lichter’s 6th annual art exhibition of custom motorcycles and wall art. This year’s exhibit includes custom bikes from over 20 of the top custom builders from around the country, and explores what is meant by the popular and often loosely used phrases “old school” and “new school.” Regardless of approach, the lines between different styles of custom bikes are blending, and “All(s)Kool”.

“We have made every effort possible to ensure that everyone who comes out to Thunder Road gets the full Sturgis experience because we’re hosting the best bike shows and exhibits, along with having the top custom bike builders on the property,” says Gary Lippold, owner of Thunder Road. “We feel like we have created an atmosphere at Thunder Road where people can come out, get a beer at Strokers, see some of the top custom bikes from around the world, and experience Sturgis Bike Week.”

Strokers

The Thunderdome will once again be host to Rick Fairless’ Strokers Sturgis. This venue will be open from 11 am until midnight Saturday August 5th through Friday August 11th. There will be food and beer available all day long from Rick’s bar and there will be free live entertainment nightly.

In conjunction Thunder Road will have the best attractions around, including Miss Sturgis, The Texas Bikini Team, and even more great entertainment. Thunder Road is a part of the Glencoe Nation and is located directly in front of the Glencoe CampResort which will be host to Rock’n The Rally, an event that will have over 20 national music acts including Big and Rich, Cheap Trick, Sammy Hagar, Steve Miller Band, Tom Petty and the Heartbreakers, and Nickelback.

Thunder Road is located 3 miles east of Sturgis on Highway 34 and is home to the premier bike builders and vendors in Sturgis.

LD seat pan

LUCKY DEVIL UPDATE–There’s this small, humble builder in Houston who builds and fabricates like a mad dog. We’re about to receive a Girl of Bikernet feature on his Shamrock bike. He’s building a shrunken Bobber for Sin Wu. He’s just built the seat pan you see here for a Shovelhead and he’s working with Victory, Cruising Rider Magazine and Bikernet on a Victory chopper. “I really like working with those guys,” Kent said.

LD tank

He works non-stop. Hell, he sold his house and moved into the shop, so he could work without the time wasted on a commute. We’ll bring you a report on the Victory shortly.


Click to see morefrom Lucky Devil

JD girl
She’s the reason I drink Jack Daniels.

HOLY SHIT, CHIP MONK–Today started late and ran afoul, amuck, and asunder. I even dueled with computer glitches and shutdowns. I received a release from Baker and it killed my e-mail system. I’ll get Tony for that.

FLAT OUT FLIPPED

If all goes well here’s how the weekend could play out. Tonight the strippers invade a local bar. Tomorrow I pick up the powdered parts for the 45, then talk the girls into attending the erotic festival with me in the evening. There’s Marco’s Birthday Party on Saturday here in Wilmas and the Rose Bowl Show on Sunday, or do I have events switched? Let’s see how it really plays out.

Oh, there’s a tattoo gig also happening and Bob Roberts is going to swing by on his way. We need to discuss another historic biker feature for the HORSE and Bandit’s Cantina Archives.

Sunday morning we hit Bandit’s Cantina Sunday Post and bring you the Sunday News from Bikernet. There’s some hot shit in the Cantina.

cowgirls
Girl shots thanks for Bikerpics.org.

In the meantime we’ve got a ton of content heading our way from a Saxon “Griffin” Road Test, a Von Dutch feature, an RS Performance bike feature, Girls of Bikernet from Jack Daniels and Deacon in Hawaii and a tech from Wolfgang publishing on soldering. There’s mo’, but wait, we have a feature brewing from LA Chop Rods and one on the ROT rally in Texas. Hang on.

Ride Forever,

–Bandit

Bonneville banner

Click Here To Be A Sponsor

Read More

June 22, 2006 Part 3

BIKERNET NEWS SPECIAL REPORTS -NEW TWISTED BOB, BILLY LANE SERVING BREAKFAST IN STURGIS, PRODUCT OF THE WEEK, MRF LEADERS, BIKERNET ARTSY NEWS, LA CALENDAR SHOW AUCTION, BONNEVILLE PRE-ENTRY DEADLINE LOOMING, ROGER GOLDHAMMER COMES TO MC ADVANTAGES AND EASYRIDERS SHOW SPONSORS

Continued From Page 2

Blood Sweat n Gears banner

BILLY LANE BUILDERS BREAKFAST OPEN TO THE PUBLIC AT BROKEN SPOKE IN STURGIS–As you can see, by reading the news each week, Billy is heavily involved in this industry and with our Veterans. He’s programmed a massive schedule for the Blood Sweat and Gears tour, and now he’s heading to Germany to visit our Armed Forces overseas.

Blood Sweat and Gears will rock Sturgis at the Chip, but Billy is taking a morning out to support Kids And Chrome, a charity devoted to the Rapid City Children’s Hospital and the Sturgis Motorcycle Museum.

Tuesday morning, the 8th of August, we will have the opportunity to have breakfast with Billy and most of the industry’s master builders. You’re invited. I’m waiting tables with Darcy Betlach’s dad, Jim, and Bikernet is a Sponsor of the event. Be there, be there, be there!

“$25 buys you breakfast with the biggest, best builders ever. All in one place, at one time. The $25 ticket charge goes straight to charity. Every penny,” said Bob Illingsworth, of Kid and Chrome.

Tuesday August 8th, 2006
Broken Spoke Saloon on Lazelle
BUY TIX ONLINE for guaranteed seat and food
TIX available ONLY at:

www.choppersinc.com/

Nicks Amsoil banner

NICK ROBERTS SPONSORS BIKERNET BONNEVILLE EFFORT-OFFERS $500 CONTINGENCY PRIZE–Here’s our new logo you can use whenever you mention my sponsorship of your bikes and/or the $500.00 prize for fastest American V-twin using Amsoil Synthetic Motorcycle Oils at Bonneville.

broken spoke logo

BRITISH COMPANY DEVELOPING COMPUTER CHIP THAT STORES MUSIC IN WOMEN’S BREASTS–This is considered a major breakthrough since women complain about men staring at their breasts and not listening to them.

from Art Friedman

josh seat n fender

BIKERNET PRODUCT OF THE WEEK–Okay, the sissy bar is almost done. I have been hand fabbing this piece out of some old fender struts. The seat is on, but I still need to rivet the front half (I had to shorten this ol ’70s choppa seat 4 inches).

The fender is a fiberglass Arlen Ness fender I picked up from Big Al In New York. I had to put a new socket in before I could install the cat eye taillight and plate mount. I think it’s a big improvement over what I started with! Still got a long ways to go, but who says ya can’t chop a jap bike!

Let me know what ya think

–Pan

MRFa

MRF LEADERS REPORT–The National Highway Traffic Safety Administration (NHTSA) has begun to finalize the details of the Motorcycle Safety Grant program set forth in the SAFETEA-LU highway legislation (PL 109-59) signed into law in August 2005.

The Motorcycle Riders Foundation (MRF) is pleased to report NHTSA has maintained the integrity of the program as drafted by the MRF in conjunction with the US House and Senate. The program description and qualifying requirements are simple and clear cut, just as the MRF and the supporting motorcycle rights organizations intended when they lobbied the Congress to include this important program.

“The grants made available through this program are a monumental step for motorcycle safety and a tremendous accomplishment for the motorcycle rights community” remarked Jeff Hennie, Vice President of Government Relations for the Motorcycle Riders Foundation.

“The MRF looks forward to working closely with motorcyclists’ rights organizations across the country to secure and implement the funds set aside by NHTSA specifically for motorcycle safety”.

The comments submitted to NHTSA by the Motorcycle Riders Foundation are included below. To view or submit comments of your own visit http://dms.dot.gov and search for Docket Number 23700. You may also mail your comments directly to the agency:

National Highway Traffic Safety Administration
400 Seventh Street S.W.
Nassif Building, Room PL – 401
Washington, D.C. 20590

whiplash sturgis

BIKERNET PHOTO ART EXHIBIT OF THE WEEK AND STURGIS TIME COUNTER–43 days till we leave for Sturgis!

Ride Hard,

Whiplash Biker Photog
mailto:soffordphotos@comcast.net

dino pet announcement

DINO PETROCELLI ART EXHIBIT–World Famous Photographer Dino Petrocelli (www.dinopetrocelli.com) will be hosting an Art Exhibit on July 29, 2006, featuring the work of Pete Fischer from Star Custom Creations(www.starcustomcreations.com) and many other motorcycle builders, as well as the bands and celebrities he has photographed through the years.

Dinos work has been in countless magazines and has worked for The Discovery Channel and the American Chopper show. The bike pictured named “Eclipse”, courtesy of Star Custom Creations will be one of the fine bikes on display.

BUB tshirt art

BUB?s T-SHIRT DESIGN–Hey Bandit, we have our design for our ’06 t-shirt and thought you might want it for your website!

Please note- they are not for sale until the event (at this stage- if that changes I will let you know)…..and the image is not to be reproduced in any way.

And your girl Valerie is one of the riders on the T-shirt!

cheers
Del

LA CALENDAR BANNER 2006

LA CALENDAR MOTORCYCLE AUCTION FOR EXOTIC BIKES COMING TO THE SHOW–The 15th annual Los Angeles Calendar Motorcycle Show Weekend, Sponsored by Bikernet.com, July 15-16th 2006 at the Queen Mary Event Park in Long Beach / Los Angeles, continues its extraordinary growth and success as the biggest Custom and Performance Streetbike Show in America and possibly the World focused on the custom, cruiser and high performance sport / streetbike markets.

Many of the world’s top Pro and Amateur Builder street bike builders will be on hand to compete in the Performance Machine Calendar Show Bike Building Championship with a record breaking purse of our $70,000 in cash and awards.

A new feature at the Show this year will be the Calendar Motorcycle Show Auction scheduled for Saturday evening at 7pm. Top motorcycle builders will have a chance to put their latest creations on the block with a Reserve Price, or move out an older Custom or Shop Rat Bike to the Best Available Bid. With Los Angeles being home to many of the most affluent bike buyers owners in America, the Calendar Motorcycle Show Auction is certain to pull some incredible bikes and bidders and will continue to grow in years to come. Among the top builder bikes up for auction at this year’s Calendar Motorcycle Show is Harold Pontarelli’s “Toxic” green chopper featured on the cover of the 2005 Iron & Lace Calendar.

Additional details for entering bikes and registering to bid at the Calendar Motorcycle Show Auction are on the FastDates.com Website at http://www.fastdates.com/BIKESHOW.09MotorcycleAuction.HTM

easyrider ad

EASYRIDERS AWARDS AND MANUFACTURER’S LICENSE ACCELERATES ALBRIGHT BIKES–Broomfield, CO , 6/18/06 – After taking home a best of show award and a best radical custom honor at this years Easyrider bike show in Denver people are starting to notice Albright Bikes as a real player in the custom V-twin industry.

This year’s winning bike is highlighted by handlebars, fuel tank, exhaust, belt drive, rear fender and battery tray all custom built for the Santee Rigid Frame. Performance Machine controls were modified to fit the look of the custom bars. The Springer Front End runs an 80 spoke DNA wheel with a 80/90/21Metzler front tire and rear fender hugs a Metzler 240/18 rear tire riding also on a DNA 80 spoke wheel. The 113″ S&S motor is mated to a Primo 6 Speed Transmission and breathes through a Goodson finned air filter.

Other key features are stainless steel hard lines and drilled heat shields for the hand made exhaust. The custom fabrication is coated with a eye-catching cobalt blue metal flaked kandy paint job with black and silver pinstriping accents. The custom seat pan was covered by Bitchin’ Stitchin’ and the gas cap is a Mark Williams filler bung modified to work for a gas cap. The custom parts, paint, chrome and stainless pieces all work to accent the flow and unique style of this timeless bike design.

Denver area riders trust Albright bikes to service and maintain their high-end custom bikes from builders such as Simms, West Coast Choppers , Bourget and Young Hot Rods And Choppers. In addition to the repair work, Scott Albright will soon release his distinct custom handlebars, belt drives, battery mounts and forward controls. These pieces will begin production this Spring and will be available to the public this fall. Albright hopes to find more time in 2006 for additional custom builds and hopefully continue his streak of Easyrider honors.

If you’re interested in a custom build, original Albright accessories or need reliable service work, you can reach Albright Bikes at 303-618-5497, info@albrightbikes.com or visit their website at www.AlbrightBikes.com.

BUBs logo

BONNEVILLE PRE-ENTRY DATE JULY 4TH–The pre-entry deadline to get your forms in to save $$$$$ is fast approaching

Your entry MUST be POSTMARKED by 4th July to be eligible for pre-entry pricing.

Pre- enter and you get $125 off the entry price and an additional savings by getting four (4) gate/pit passes (FIM?AMA entries only, Gate passes for Run watcha Brung entries).

Entry details are available on our website at http://www.speedtrialsbybub.com/2006_event/rego-06.html

If you need an entry form mailed or faxed to you call me on 530-272-4310- leave your name and address of fax number and I’ll send one out right away.

FIM PARTICIPANTS:- you must have you licensing and world record application into the AMA by the end of this week- please call Sue at the AMA if you have any questions. If you have not already sent in your entry form to us- you must do this in addition to your FIM paperwork.

I will confirm- either by phone or email when I have received your entry form. If you have faxed or emailed your form and not received a confirmation please let me know. If you have posted it and not received a confirmation, it may still be in the mail- but feel free to contact me to check. Passes and event information etc, will be mailed to participants in early August.

PLEASE REMEMBER:-You need to confirm your motorcycle number or if it is already taken you will need to change it.

You have to be an AMA member. If you have applied for membership but have not got your card yet- leave it blank- you can contact me when you have your card to give me the number (we have to confirm this at the event also by seeing your card).

If you are not sure of your class, or are still deciding on your class you have a few options and can still get your entry in on time:

1) Call our Scrutineer who can assist with putting your bike in the right class- Ken @ 530-477-7490 ext 211 OR event-tech@speedtrialsbybub.com

2) leave it blank and call be PRIOR to the event to fill in the details.

Of course if you have any question please contact us we are happy to take your call!

–Delvene
Event Manager
International Motorcycle Speed Trials by BUB Information
www.speedtrialsbybub.com
PH: 530 272 4310
FAX: 530 477 7489
Email: eventinfo@speedtrialsbybub.com

A SPECIAL THANK YOU TO OUR SPONSORS-Drag Specialties, Parts Unlimited, Pingel Enterprises, BUB Enterprises, Bikernet.com, Potter Lumber, NRHS V-Twin Performance, Buell Bros Racing, Bennett’s Performance, Bakker Motorsports, Dealer-World.com, Nick’s Performance, Horsepower Marketing.

Goldammer_AirTime1

MC ADVANTAGES FIRST DISTRIBUTOR FOR WORLD CHAMPION ROGER GOLDHAMER–With the introduction of a 2006 catalog update, MC Advantages is the firstdistributor to offer parts from World Champion Roger Goldammer of GoldammerCycle Works. The first part to be offered is the distinctive Air Time AirCleaner.

This polished stainless steel breather helps to define theGoldammer look that can complement any style of bike. The Air Time isdesigned for 40mm CV carbs and Delphi? EFI units. It can also bolt onto S&S?and Mikuni? carbs with an adapter from MC Advantages. See your local MCAdvantages dealer or log on to www.MCAdvantages.comhttp://www.MCAdvantages.com today.

MC Advantages
1-800-726-9620
http://www.MCAdvantages.com

horsepower rosebowl and skull logo

MORE ON ROSE BOWL BIKE SHOW THIS WEEKEND–You already know that the Rose Bowl BikeFest (June 24th – 25th) SPONSORED BY BIKERNET.COM is going to be THE V-Twin Experience of the year, and your friends at LifeStyle Cycles are going to make it even better by having INCREDIBLE DEALS at the show! How incredible? Let’s just say we have a show special on SAXON MOTORCYCLES that’s so crazy, we can’t even print it. How about checking out the 2006 line of AMERICAN IRONHORSE bikes? They’ll be there, as well as the new line from BIG DOG MOTORCYCLES and a surprise line of motorcycles we haven’t even announced yet! The bottom line is you will not want to miss this show!

We’ll also be doing a live engine swap on stage with S&S CYCLES on Saturday, installing a ProCharger Supercharger system on a bike Sunday, and on BOTH DAYS, we’ll be having the popular LifeStyle Cycles FASHION SHOW, featuring some of the hottest girls and coolest guys around.

LIFESTYLE CYCLES BANNER

And you still have time to come into LifeStyle Cycles and get a FREE LifeStyle Cycles VIP Parking band.

SEE YOU AT THE ROSE BOWL BIKEFEST!

avon venom banner

AVON BOBBER PROJECT ROLLING–Well, my ‘bobber’ project is coming along finally.The frame showed up yesterday and the motor, transmission and ton of other stuff should be here in a few days.Once I get the build started I’ll be sure to update you with photos and all that stuff.

It should be pretty damn cool when it’s all done. The front end I’m using is super trick.It came off my old Husaberg Supermoto race bike, Marzocchi 50mm conventional with billet clamps.

Of course the lowers will be painted black.

–John Leach – Sales / Racing Support

twisted chop bike w girl

NEW FROM TWISTED CHOPPERS–check out this little sled the TC crew just finished.Too bad the girl has her clothes on….

–Ken

ILLINOIS BIKERS GO TO COURT TO PROTECT SAFETY FUNDS– Illinois motorcyclists, tipped off by state Treasurer Judy Baar Topinka, have sought to block Governor Rod Blagojevich from using biker safety funds to bolster the state budget.

An aide to Topinka, Blagojevich’s Republican challenger, acknowledged alerting ABATE of Illinois that the governor intended to transfer specially earmarked motorcycle safety money to the state’s general bank account..

ABATE went to Sangamon County Circuit Court to prevent the Democratic governor from transferring money in the funds set aside for biker safety and training. Money in those funds comes from motorcycle registration fees and other surcharges paid by bikers. The group argued the governor lacks the constitutional authority to transfer the funds.

Aides to the governor said state lawmakers approved the fund transfers, which gave Blagojevich the authority to move the money. A lawyer for the state told the court the money is needed to pay bills, and that the money transfers, totaling about $90 million from a number of specially earmarked funds, are part of the overall budget plan.

A spokeswoman from the governor’s office criticized the state Treasurer’s long-standing opposition to fund transfers; “If Treasurer Topinka had her way, special interest funds would continue to sit unused year after year, serving no purpose whatsoever.”

Recently in Ohio, the Office of Budget and Management proposed transferring $750,000 from the state’s Motorcycle Safety and Education Fund for other purposes, but motorcyclists’ rights organizations throughout Ohio successfully persuaded the Ohio Controlling Board to deny the raid on this rider-supported fund.

US Chopper banner

Continued On Page 4

Read More

June 22, 2006 Part 2

BIKERNET NEWS FLASH -LEARN HOW TO AIRBRUSH, LEARN HOW TO SUPPORT OUR FREEDOMS, CHARLIE BRECHTEL SINGS HIS HEART OUT, FLORIDA TAG LAW SUCKS, SEMINOLE HARD ROCK ROAD HOUSE HITS LACONIA AND ROT, ROSE BOWL SHOW HAPPENING, ROLLIN SIXERS GRIPS, JIMS TOOL OF THE WEEK AND AEROMACHS NEW LED MIRROR

Continued From Page 1

Pro Airbrush2

VINCE GOODEVE AIRBRUSH TECHNIQUES BY WOLFGANG PUBLICATIONS–Wolfgang Publications, Longtime publisher of how-to books, has released:Professional Airbrush Techniques with Vince Goodeve

Written by well-known Airbrush artist Vince Goodeve, this new book uses 144 pages and over 500 color images to explain a lifetime’s worth of learning. Follow Vince through multiple photo sequences that explain his choice of color, sense of design and preference for tools and materials.

Early chapters explain shop set up and preparations of the metal canvas. Ten start-to-finish sequences walk the reader through Vince’s airbrush work with both motorcycles and cars. Projects include simple graphics as well as complex and intricate designs. Accustomed to teaching, Vince’s style is easy to understand, while his enthusiasm for the airbrush makes the text easy to follow. Vince Goodeve is an artist with great how-to help for all airbrush artists – whether beginner or advanced.

WOLFGANG BANNER

Pro Airbrush Techniques, 144 pages, 100% color, $24.95Available for $24.95 + $5.50 S&H, this 144 page all-color book can be purchased from Wolfgang Publications, 217 Second Street North, Stillwater, MN 55082. Order by phone at the 24 hour order line: 651-275-9411 or on the web at www.wolfpub.com.

Join the Bikernet Free Contest/Door Prize area, quick. We’re going to be giving away several Wolfgang books including this one. I guarantee your odds are better than state lotteries.–Bandit

Bros Club

BIKERNET READER FIGHTS NOISE POLICE–Dude,I live in New Hope. PA, every week end there must be 100 bikes parked on main street . Small little artsy artsy town 1 sq mile on the Delaware river, north of Philly. Great bike riding area on a river road.

I bought a ’72 super glide new when I came home from Nam, just sold it last year. Anyway the city fathers have a noise law now because dick heads (mostly dudes on $50,000 bikes), sit on their bikes and rev their fricking straight pipe machines either parked or sitting at one of two traffic lights in town, because they think it sounds cool. That in a nut shell is the problem — dumb asses ruin it for us all.

–Michael

This is a constant dilemma, so Bikernet performed and Independent noise study to point out both sides of the issue. The completed study is available to anyone who needs to share the motorcyclists’ side of the issue with their communities. It’s available to all in our Special Reports section under political issues. Michael printed it out and took it to the city fathers. He’s currently doing life for pissing them off.–Bandit

MRFa

KEEP WRENCHIN’ TIL IT’S FIXED– At the Motorcycle Riders Foundation Best of the West Conference in Prescott Arizona this weekend a great story about maintaining our motorcycle freedoms was told that I will relay to you.

As the story goes an old time biker had as long as anyone could remember always hung around ABATE. He seldom missed a meeting, a run, or a party but never got involved in the legislative activities saying others were much better than he at doing that sort of thing. Well after years of trying they finally got him to agree to attend a letter writing party, most likely because of the free beer they figured.

He did show, surprising the others, and he did write a letter highlighting his concerns about the latest motorcycling issue and shortly thereafter got a polite response. You know the one that says thanks for your interest however you’re dead wrong. That supported his feelings that writing letters and getting involved didn’t really work for him. The local members stayed on him and after about two months he broke down and came to another letter writing party only this time he wrote it “biker style”. This shouldn’t come as a surprise that he never did get a response to his second letter, and that cemented his belief that he wasn’t cut out for this type of thing.

The old time biker then fell off the face of the earth and nobody had seen him for several months so they decided to take a ride out to his place. They found him in the garage with a few parts lying around. When he was questioned about his absence, he said he was wrenchin’ on his bike and just didn’t have time to come around anymore. After they worked on him for a while he did commit that when he got his ride fixed he would eventually come around again.

Some time passed and having still not seen the biker show someone rode out to his place again and this time he had parts absolutely everywhere and his bike completely torn down. He said he had wrenched on his bike and got it going but he wasn’t happy with it so he decided to tear it down and wrench on it some more until he got it just right.

Seeing a correlation the quick thinking local ABATE rep. took the opportunity to drive a point home. He looked at the old biker and said you know after just a few letters you gave up on the legislative process, but with your bike you’re willing to spend hundreds of hours tearing down a bike and wrenchin’ on it until it runs just right. And you’ll do it more than once. He went on to say, our freedom as a biker is just like wrenchin’ on a bike. It takes hundreds of hours. You do it several times, and won’t compromise until it is just right. It’s simply that important.

The story has a great ending. The old biker not only showed up at the next meeting but suggested they all come to his place for the next letter writing session. And to continue the story he now can be seen regularly lobbying at their State Capital and has even served as an ABATE rep. for a time.

So you see the moral of the story here is that our freedom is just like our bikes. You gotta keep wrenchin’ on it, over and over, until you get it right and sometimes it doesn’t come easy.

back

BOOTH SPACE AVAILABLE–Lucky Les here, putting the word out about The 2006 PACIFIC NORTHWEST SKIN N STEEL EXPO. This is going to be an event like the northwest has never seen. Hardcore Custom Motorcycles , Hot Ink from the industries wildest tattoo artists , and Vendors from all over the place displaying all types of Motorcycle and Body Modification merchandise.

THIS IS GOING TO BE A HUGE EVENT! CHECK OUT OUR FULL PAGE AD IN JUNE PAIN MAG

AND OUR HALF PAGE ADD IN THE JULY ISSUE OF THE NORTHWEST EDITION OFQUICKTHROTTLE MAGAZINE

CHECK OUT OUR WEBSITE. FEEL FREE TO GIVE US SOME FEEDBACK.SPONSORSHIP SPACE STILL AVAILABLE.(SEE THE WEBSITE FOR MORE INFO). OUR NEXT OUR

Skin N Steel Presents, Inc.
LUCKY LES
ROWDY RON
CHECK OUT OUR WEBSITE
www.skinnsteelexpo.com

charlie bretchel banner

BIKER FOLK HERO, CHARLIE BRECHTEL–“The soul of the American biker and the music of Charlie Brechtel are truly one and the same…”

There is a history, a legacy and a brotherhood that comprise the soul of the American biker. Those are also the elements that separate the music of Charlie Brechtel from any other musician or band who aim their talents at the motorcycling community.

bikers inner circle radio banner

With Charlie it’s all about reality. It’s about what actually goes on –and has gone on– within the inner circle of America’s last breed of folk heroes. Charlie doesn’t just play the kind of rockin’ blues that is the perfect soundtrack to this way of life; Charlie takes his listeners into a world that was begun in America’s post WWII years, screamed through the 50s and 60s and has evolved into one of the most powerful and envied sub-cultures that this country has ever produced.

His tribute tunes are becoming legendary. His music pays homage to the biker lifestyle in a way that no other musician has ever done. Charlie Brechtel weaves the personalities who pioneered this way of life into the heart of all of his songs. Men like Sonny Barger, Wino Willie Forkner, the Bravo Brothers…vintage bikes like the Indian…biker Meccas like Sturgis, Hollister and the Buffalo Chip…all supply the ever-sharp edge to the music of Charlie Brechtel.

Charlie’s roots extend back to his hometown of New Orleans…the tradition of that town…the power…the feel…it’s all there…it’s deep within the blood. He’s played with Gregg Allman and John Lee Hooker and a host of others…his CDs feature some of the best musicians in blues and rock ‘n roll today…he’s played Sturgis, Love Ride 21, Easyriders, Las Vegas Bikefest and countless other major biker events and venues…The soul of the American biker and the music of Charlie Brechtel are truly one and the same…

check out charlie’s music at http://www.big7productions.com/soundclips.htm

Oldd BSA ad

NEW FLORIDA MOTORCYCLE TAG LAW–This Florida Tag law does nothing for motorcyclist. Making Rider Education Mandatory is a money-making adventure for those looking to gain from the popularity of motorcycles.

Though I am In Favor or Motorcycle Rider Education I Am Against Making It Mandatory.LOOK at the prices that are being charged for classes. What Has Happened to the MONEY That is added to every License Fee that is suppose to Go To Education.These Courses Should Be Free To Who Ever Wants To Take Them

Those That Say They Are For Safety Should NOT BE MAKING MONEY FROM IT!!!!!!MOTORCYCLIST NEED TO CONTACT THEIR ELECTED OFFICIALS and Let Them Know If They Vote For This They Will NOT GET THE BIKER VOTE.

Florida — A new piece of legislation will be law by the time this article goes to press. Motorcycle riders in the state of Florida between the ages of 16 and 21, will be required to purchase a tag for the motorcycles they own, that is a different color from the rest of the motorcycle population. This tag would make underage riders easily identified by local law enforcement.

Aside from the obvious issues concerning the processing, cost and inconvenience of changing tags, is one of law enforcement being able to match underage riders with helmet usage, or the lack thereof, at a glance. (Profiling?) The rationale for introducing separate tags for the 16 to 21 year old, motorcycle rider is a direct result of the number of underage riders who died in crashes over the past few years, who were not wearing the required helmet. Although these individuals were riding illegally, there is no data indicating if age or experience level was a factor in those crashes or if the usage of a regulation helmet would have had any impact on the eventual outcome.

The case against a separate tag, for motorcycles registered by riders under twenty-one, is the ease by which the rule can be circumvented. The registered owner of a motorcycle and the person riding the bike are not necessarily the same person. A motorcycle, owned by a person over twenty-one, could easily be ridden by an underage rider. The tag would not alert anyone to the matter and there does not appear to be anything illegal with this scenario. The current rules for underage riders would remain in place.

On the surface, this doesn’t appear to be a big deal. Ok, underage riders have to wear helmets, so now they have a tag identifying their age. If you obey the laws there is no problem. What’s one more law? But, who are the kids who will follow the rules? Probably the same ones who followed the rules before the change! Who will circumvent the regulations? More than likely, the same ones who broke the laws that caused the change in the first place. So, what has been accomplished, besides another paper chase and a bit of profiling? Stay tuned?

Another piece of legislation that is likely to be signed into law deals with rider training. There are a number of questions on how this one will work and what will be entailed in fulfillment of the requirements. At first glance, this bill would require all new riders, regardless of age, to complete a basic rider training course before they would be eligible for their motorcycle endorsement. Currently, the course is only mandatory for those under eighteen. It appears those riders who already have the “motorcycle also” endorsement on their operator license would be grand fathered into the system. The bill has also been tied to the registration of new motorcycles. Before registering a newly purchased motorcycle, the rider would be required to show proof of the successful completion of a basic rider course.

The rationale from lawmakers is wrapped up in the number of riders killed on Florida roads. Without specific numbers sited, the mandated rider training supports the idea that many of the riders have been killed or injured riding motorcycles are inexperienced or lack proper training. Tying this basic rider training to endorsements and motorcycle registrations would bring dealers into the accountability loop for rider training. At the very least it would make all parties more conscious of a riders ability to handle a particular machine, before they take to the streets.

In a recent survey, conducted by ABATE of Florida, Inc., the vast majority of experienced riders expressed a desire to see new riders complete basic rider training before getting on a motorcycle. However, there are several issues involved in this new legislation that should send red flags up for all of us. If basic rider training is required for everyone who applies for a motorcycle endorsement or to purchase a motorcycle, everyone will eventually need to take the coarse, regardless of how long they have been riding. No such training is required for a new car driver to obtain a drivers license and you need not be a licensed driver to buy a car.

If a basic rider class is required for motorcycle endorsement eligibility or to purchase a motorcycle, and this class continues to be given by private businesses, without a cap on the provider charge for the class, what is to keep the cost from being driven by supply and demand? Classes currently cost between $180, to over $300. The training centers process around 33,000 riders per year. With the training becoming mandatory, those sites would be processing over 100,000 riders per year just for new endorsements. With 6 to 8 week wait times currently experienced in some metropolitan areas, the demand for the classes could send the enrolment fees through the roof, making them unattainable for the average person.

By accepting these mandates from our state government, what is to keep them from requiring basic rider classes to obtain a motorcycle, learning permit, advanced training for an endorsement and a masters riding class to purchase a motorcycle over 1000cc’s? The precedent has already been established. Each of these classes could have mandated waiting periods of 12 to 18 months and cost upwards of $1,500, as is currently the case in much of Europe.

Do we apply freedom of choice only to helmet issues? Are we willing to let our government take over when personal responsibility is ignored by some, ignorance practiced by others and disregard for public safety becomes common place? We can stand back and watch our motorcycles and our life style, legislated into nonexistence? Or, we can vote out the lawmakers who have no regard for personal freedoms and educate our people and the public on motorcycle related issues.

We’ve fought the helmet issues for so long. Now, when it looks like we might have gotten a few to understand that it is not the helmet, but the right to make personal choices that is at stake, our government throws out another mandate that appears to be “FOR OUR OWN GOOD”. What may appear to be a move toward making motorcycle riding safer could be the open door for the restrictions and control we have fought so long to prevent. The proverbial “wolf in sheep’s clothing” is again knocking at our door. We can open the door or choose to regard these pieces of legislation as the threat they are while we still can.

–ABATE of Florida, Inc.
P.O. Box 2520
DeLand, FL 32172
–Cyndi von Bulow
Public Relations Office
mailto:abateflpr@yahoo.com
386.760.6610

RH home page banner

SEMINOLE HARDROCK ROAD HOUSE ALIVE AND WELL–Our next Roadhouse isn’t until BiketoberFest at Destination Daytona; thenthe Christmas Toys in the Sun Run in Ft. Lauderdale where we’ll fly in thefive semi-finalists and give one of the bikes away. Our builders will leadthe 60,000 + bike parade down 25 miles of highway!

People have got to enter to win on the website at hrroadhouse.com! Only wayto win is enter.

–Carrie Repp

R&R Promotions

lifestyle rosebowl ride

LIFESTYLE CYCLES RIDES TO ROSE BOWL SHOW–It’s finally here! The ride of the year! This Saturday, June 24th, join us for LifeStyle Cycles Ride to the Rose Bowl BikeFest! Your friends from American IronHorse and the AIR (American IronHorse Riders) Group will be sponsoring a huge free breakfast and giving away some cool T-shirts. We’ll have music, raffles, giveaways and much more! Don’t miss out … this will be the ride of the year to the event of the year!

It all happens at LifeStyle Cycles at 8:00AM that morning for free registration and the IronHorse-sponsored breakfast! The store will be open too, so you can get that last minute riding gear or cool accessory for the trek over to Pasadena for the motorcycle experience of a lifetime … the Rose Bowl BikeFest!

If you haven’t done so already, please RSVP to let us know if you and a passenger will attend (we gotta make those last minute plans for breakfast, you know). This is going to be a GREAT ride!

Here’s the date and times:
Saturday, June 24th
8AM: LifeStyle Cycles store opens, Free Ride
Registration and American IronHorse breakfast begins.
9:59AM: KICKSTANDS UP!

rolling six grips

ROLLIN SIXES CUSTOM CHOPPERS COMES TO BIKERNET–I’m Ellis owner of Rollin’ Sixes Choppers North. Jerry told me he talked to you the other day about the parts. He told me to send you a part a week for the Bikernet News. I’m not the best on a computer so I hope if what I send is wrong just let me know. I don’t know how to size the pics he said you need jpeg 1meg.

Not sure if they are 1meg or not. I’ll have one of my buddies stop by and set me straight on how to change the pic sizes, if they are wrong and send it over again. Just wanted to get on this and send it over to you.

Rollin Sixes Grips — Grab hold of sensational style for your bike with show polished CNC machinedbillet grips from Rollin? Sixes Choppers. It’s like having four grips in one. Our gripsfeature interchangeable end caps. Choose from four designs: Maltese-Cross, Ace ofSpades, Nautical Star and Dome Style.

Our grips fit models from 1973 to present withsingle or dual throttle cable. Grips for internal throttles are also available.

–Ellis
rollinsixescustomchoppers@yahoo.com

We welcome news, new bikes and new products from shops all over the world. We post two Bikernet news columns a week, so the world will see the shit weekly. –Bandit

987

BIKERNET JIMS TOOL OF THE WEEK-DYNA MAIN TRANS CASE BEARING TOOL No. 987– Use on all 2006 to present Dyna Trans.Use this tool to safely install a new main trans case bearing by using hand tools. Tool will hold bearing square to its bore, eliminating any marring of the bearing bore. This tool is used in the same manner as JIMS Tool No.35316-80 that you’ve been using for years.

Jims Banner

FROM THE BIKERNET MONASTERY–Lost on a rainy night, a nun stumbles across a monastery and requests shelter there. Fortunately, she’s just in time for dinner and was treated to the best fish and chips she’s ever had.

After dinner, she goes into the kitchen to thank the chefs.

She is met by two brothers, “Hello, I’m Brother Michael and this is Brother Charles.”

“I’m very pleased to meet you. I just wanted to thank you for a wonderful dinner. The fish and chips were the best I’ve ever tasted. Out of curiosity, who cooked what”?

Brother Charles replied, “Well, I’m the fish friar.”

She turns to the other brother and says, “Then you must be”?

“Yes, I’m the chip monk.”

–from CarlR

aeromach flamed led mirror

FLAMED LED MIRROR ASSEMBLIES–Adding to their rapidly growing line of crowd stopping custom accessories, Aeromach recently introduced these wayyyyy different Oval Mirrors set on Flamed LED stems. Cool or what!

Mirror and flamed stem assemblies are CNC machined from 6061-T6 extruded billet aluminum which is fully polished and flawlessly chrome plated. Flamed stems are fit with an amber LED board and 25 amber lights designed to wire into your bike’s running and turn signal circuits. Wires are run through the stem so they can be routed inside handlebars.

Sold in pairs, these awesome LED MIRROR assemblies are available with OVAL and FLAMED OVAL head units and can be purchased to fit directly to stock Harleys, American Iron Horse and American Customs as well as aftermarket levers from PM, Ness and Jay Brake.

Mirror head dimensions are 2.5″ H x 5.25″ L and the stems are 3.5″ H x 5″ L. For complete details contact Aeromach Manufacturing at 800-990-9392 or catch them on the Web at

Aeromach Banner

Continued On Page 3

Read More

June 22, 2006 Part 1

BIKERNET NEWS HEADLINES -400 TIRE HERE! GAMBLING ON BIKERNET AND WIN A REV TECH ENGINE, BILLY LANE CATCHES FIRE, KUSTOM FAB COMING TO LA, DETROIT SURVEY, BIG MIKE GIVES ROLLER AWAY, BUELL DOMINATES, AND MIKE LICHTER ROCKS THUNDER ROAD IN STURGIS

Build trophy girl

Hey,

We’re scrambling through the news. It’s a good one and it’s been a strange day. We tried to dodge the phones, but no luck. Several important calls came it regarding Bonneville and bike projects. Some of our powder work will be completed tomorrow. I’m anxious to work on these bastards. Shit, we’re burnin’ daylight.

So let’s jump directly into the news. By the end, maybe I’ll calm down some and have something wild, wicked, or wanton to add. Let’s hope so:

syd fat tire

BUNT’S GOES 400- BIG–Wellings Engineering, the Birmingham (United Kingdom) based prototype shop has released details of it’s latest project.the widest motorcycle rear tyre in the world! Measuring a massive 400mm the tyre incorporates the Wellings bike relatedtradename of Bunt’s as the tread pattern.

syd 400 side

Not intended for production, the tyre is the latest example of the company’scapabilities to produce ultra realistic concept models. Says owner Syd Wellings, “Normally I produce working prototypes and concept models for the trade, but I had the urge to produce this item to demonstrate one of the wide range of materials I work with”. Although the tyre couldn’t be used on the street, it looks and feels like a real tyre. This particular tyre is destined for a Bunt’s concept bike wrapped around a trick, three-piece, carbon fibre/cast aluminium wheel.

Syd Wellings
Wellings Engineering
18 Wainwright Street
Aston
Birmingham
B6 5TJ
United Kingdom
tel : +44 (0)121 328 4400
fax : +44 (0)121 328 4433
e-mail : syd@wellings-eng.demon.co.uk

BL wheel stop3

BILLY LANE VISITS TROOPS IN GERMANY–ARLINGTON, Va. – Custom bike builder Billy Lane will depart on his first USO tour to Germany June 30. During the six-day tour, Lane will spend time with service members and their families at Vogelweh Military Complex as well as participate in July 4th celebrations at Spangdahlem Air Force Base, Baumholder Army Base and Ramstein Air Base. This tour is co-sponsored by Armed Forces Entertainment.

Lane has a long-standing respect for the armed forces. During a recent tour of bike rallies across the country, documented in the recently released DVD “Blood Sweat & Gears,” Lane gave custom bikes to four service members. In addition, he has written two books, “Chop Fiction” and “How to Build Old School Choppers and Bobbers.”

uso patch

After graduating from college with a degree in mechanical engineering, Lane started working on motorcycles and making custom bike parts for his friends as gifts. The demand for Lane’s specialty parts led to the formation of Choppers Inc. in 1995. Lane’s bikes and parts also have been featured in numerous magazines and have won several awards. Lane holds 7 patents in the US.

Since 1941, USO celebrity entertainment has played an essential role in boosting troop morale. With a handshake, signed autograph or simple conversation, entertainers are conveying the thanks of a grateful nation. Some performers who have participated in recent USO tours include Master P and Lil’ Romeo, Toby Keith, Gary Sinise, Chely Wright, Montgomery Gentry and La Mafia. Tours are sponsored by AT&T, Inc., the official telecommunications sponsor of USO entertainment tours.

Q3

BILL WALL LEATHER NEW WEB SITE–Somehow you ended up on our VIP email list. This is the first time we have used it.We just launched a new website update that includes over 50 new items. Check it out at http://www.billwallleather.com… or not.

Cheers!

-Keith
BILL WALL LEATHER, INC.

bandit - nights out

PENCIL BANDIT ART FROM ENGLAND–Please find attached a pencil drawing of Mr K Randall “Bandit” Ball, taken from an image in an earlier Easy Rider magazine. Hope he likes my work ! If you want to view other pieces of my art please go to http://www.lazylivingstudios.com

I work hand in hand with Aardvark Choppers and we are both based in Northamptonshire, England. Fantastic magazine, easily the best on the market.

Keep up the good work

Regards – Kevin Ash

Billy-Lane_flames-11

BILLY LANE RUMOR CONTROL–Bandit- Got any news on Billy Lane’s 3rd hublesschopper going up in flames at Laconia? Hope he wasn’thurt! That would suck!

Thanks man, and as always keepup the good work!

–Steve

We immediately contacted our East Coast Bikernet correspondent, TBear. Here’s his report. “Yes indeed-de-do.Seems that a weld on the gas tank may have cracked.I’ll be with Billy this weekend and I’ll try to get the true skinny.At lease no one was hurt, except maybe their pride.Such is life in the “Fast Lane”.

–Bandit

kfab

HAWAIIAN KUSTOM FAB REPORT–Wasn’t to sure if you were going to be in town, during the July 2nd show.Roger and I wanted to invite you and Nyla to our get together at theShop on Saturday July 1st. It will start around 6:00 PM. Just let us know ifyou will be able to make it, we are trying to put together a head count.

Also while I have you attention, we didn’t want to inconvenience you, butRoger and myself are planning to take the Fusion bike to the LA Calendarshow, and was wondering if we could stop over on that Saturday night beforethe show, and crash at shop.

P.S check out the newest, it not done in photo but it will be by the July2nd show.

–Darren

The Fusion bike, featured on Bikernet, will be housed at the Bikernet headquarters previous to the LA Calendar show. The crew from Kustom Fab will be trapped inside.–Bandit

american rider

DETROIT BIKER SURVEY–Hey Freedom Fighters…We are winning the Detroit News poll! Vote now! And call the Guv: 517-373-3400 Please respond to this Det. News survey at the web site below
www.detnews.com

And send the article from the News to all your friends who have open minds and ask them to vote too!Thanks Jim Rhoades for all your hard work. ABATE members be proud!

–Al (hawgman) Salmi
Legislative Officer, Region 17, ABATE of MI
Rapid River, MI

BMC bobber frame

PARADISEBIKEFEST BIG MIKE GIVE-AWAY– Big Mike of BMC Choppers will give a away a custom built BMC rolling bobber chassis at Hawaiian Chopper Magazine’s Paradise BIkefest on Sunday, July 2nd. “Hawaii has a special place in my heart, so when Steve [Kalnasy] asked me to be a sponsor, giving away a rolling chassis seemed like a good way to get involved,” said Big Mike. Joining sponsors like Pasha Hawaii, Budweiser, Pacific Rim Cycle, Avon Tyres, all of Oahu’s Harley dealers, and a host of other local and national sponsors, Big Mike will be on hand for Hawaii’s largest bike rally.

Along with Big Mike, Discovery Channel’s Biker Build-Off winner Harold Pontarelli will be on hand for the weekend’s activities, and other well known celebrities, such as Monster Garage’s Big Schwag, The legendary Sugar Bear, the Chopper Freak Jose De Miguel, and Great Hawaiian Biker Build-Off competitors Roger Kuwahara of Hawaii’s Kustom Fab Choppers and Shannon Aikau of Las Vegas’ Count’s Kustoms will be on hand to show their bikes, and hang out.

Before the gates open at Kapiolani Community College at 12:00pm, a memorial ride will be held in honor of Johnny “Chop” Vasko, and Jimmy Aikau of Count’s Kustoms. Registration for the ride will begin at 7:30am on Sunday, July 2nd, and leave Cycle City Harley-Davidson at 9:00am for surfing legend Eddie Aikau’s memorial at Waimea Bay. After a brief ceremony (est. 10:00am), riders will head to KCC for a biker party that few will be able to forget.

A $15.00 entry fee ($10.00 advance) will be charged at the door, and anyone wishing to join either the ride-in bike show/contest, or tattoo contest can do so for a registration fee of $25.00 (includes entry into the event). Cool prizes wll be given away for the contests. We will also feature a bikini model search showing off some of the finest women in Hawaii, and live musical entertainment featuring the hard rockin rythyms of Hawaii’s own Big Dawg, and Big Head/Warner Bros. Records artist Kevin McKay of the Warren Commission will display some of the best harmonica every displayed.

If you are interested in registering for any of the contests, or you just want more info on the event, visit www.paradisebikefest.com, or call 808-780-2998.

Tickets are on sale at Pacific Rim Cycle, South Seas Harley-Davidson, Cycle City, Grumpy’s Kustoms, Kustom Fab Choppers, Rosa’s Ice Tee, Mikey’s Speed Shop, Military ticket outlets (Marine Corps Base Hawaii, Pearl Harbor, Schofield Army Base), by phone at 808-550-TIKS (8457), or at www.honoluluboxoffice.com.

Hope to see you there!!!

Steve Kalnasy
Editor/Publisher
Hawaiian Chopper Magazine

vice

BIKERNET DEVELOPS SPECIAL WELDING BENCH VISE–Sculpture Master, Jeff Decker, came by the shop and snooped in all the drawers. He nodded at a few things, with acceptance in his eyes, but when he saw the tilting vice on my welding table he stopped. “That’s a nice piece,” Jeff said. “It shouldn’t be used there or under a torch.”

That stuck in my mind, besides it was too small to handle most heavy jobs. So last weekend we built this job out of Donnie’s old lathe and milling machine brackets and another vice. It works even better, tilts and turns in any direction.-Bandit.


ESTOK AND BUELL DOMINATE ASRA THUNDERBIKE RACE AT TOPEKA– TOPEKA, Kan. (June 18, 2006) – Veatch Motorsports rider Dave Estok rode a Buell Firebolt XB12R to set the pole position, lead every lap and win the American SportBike Racing Association (ASRA) Thunderbike National at the Heartland Park Topeka road course. Ed Key finished second on a Suzuki, followed by Blue Springs H-D/Buell rider Walt Sipp, also aboard a Buell Firebolt.

Estok, the defending National Thunderbike champion, was top qualifier for the event with a lap of 1:48.335 on the newly repaved 2.5-mile Heartland Park Topeka Grand Prix Course. At the start of the 10-lap Thunderbike National, BMW rider Nate Kern grabbed the lead with Estok in pursuit. Estok passed Kern to lead the first lap and then rode away from the field.

Behind Estok, however, a fierce battle was waged by Hal’s H-D/Buell-Hal’s Speed Shop rider Dan Bilansky and H-D/Buell of Frederick rider Bryan Bemisderfer, both on Buell Firebolts, plus Kern and Key, as the four riders swapped positions for seven laps. Bemisderfer overcooked the entrance to Turn 1 on the second lap, rolling onto the paved run-off area, and then battled back through the field to rejoin the group racing for second position. Bilansky dropped out on lap seven with a mechanical problem, and Kern left the race on lap eight, also with a mechanical problem. On the ninth lap, while in second place, Bemisderfer crashed and fell at the entrance of the backstretch chicane. He managed to pick up and ride his Buell out of the muddy infield and get back on the track to finish the race in fifth.

“All the action was behind me today,” said Estok. “After the first lap, I just put my head down, and when I finally looked back, nobody was there. I really want to win this championship for Veatch Motorsports. And I feel like we’ve got some momentum going into VIR.”

Hal’s Speed Shop/Spyder Leatherworks.com rider Paul James rode a Buell Firebolt to fourth. Buell riders Greg Avello (Badger Motorsports/Hal’s Speed Shop), Sam Rozynski (Sound Waves/Hal’s Speed Shop) and David Myers (Delta Dist./Wynn’s Pro Products) finished sixth, seventh and tenth respectively.

Buell racers also took four wins and 8 podium finishes during the Championship Cup Series support races at Heartland Park. Estok nabbed a win in CCS Expert Thunderbike, while Bemisderfer won in CCS Expert SuperTwins. Racine Harley-Davidson/Buell rider Thomas Michels won the CCS Amateur Lightweight F40 and Amateur SuperTwins classes with his Buell Cyclone M2. And on Friday, in the ASRA Team Challenge endurance event, Team Fat Boy riders James and Avello won the GT Lights class and finished seventh overall on a Firebolt XB9R.

With his fifth-place finish, Bemisderfer takes over the lead in Thunderbike season points from Kern. After four of eight races, Bemisderfer has 100 points, followed by Kern with 95, Estok with 94, and Bilansky with 85. The next race on the eight-round ASRA Thunderbike National schedule is June 24-25 at Virginia International Raceway near Alton, Va.

THUNDER ROAD BANNER

wil5

THE JOURNEY CONTINUES WITH “SCHOOLS OUT; OLD SKOOL, NEW SCHOOL, ALL(s)KOOL” MOTORCYCLE THEMED EXHIBIT TO BE HELD AT THUNDER ROAD, COINCIDING WITH STURGIS BIKE WEEK 2006–STURGIS, S.D.- The journey continues with Michael Lichter’s motorcycle themed art exhibition at Thunder Road in Sturgis S.D., coinciding with Sturgis Bike Week 2006, a gathering of several hundred thousand bikers in the Black Hills region of South Dakota each August. In the five previous years the exhibition has been held at the Journey Museum in Rapid City; the change of venues to Thunder Road will allow access to more motorcycle enthusiasts.

mike lichter

“School’s Out; Old Skool, New School, All(s)Kool,” will examine the often over-used terms “Old Skool” and “New School” with an art exhibit featuring custom motorcycles, as well as motorcycle themed photography and painting. 24 of the most widely recognized motorcycle builders in the industry will display bikes showcasing their individual approaches and innovative design ideas, which encompass both new and old school styling. The art on the walls will feature four artists closely tied to the motorcycle world. Timothy White will be exhibiting photography from his recent book on Indian Larry, art that reflects on their years of friendship, shared times in New York, and many road trips. Joe Richardson, who has painted many of Billy Lane’s customs, will be debuting a 15′ wide interactive sculpture along with some traditionally striped panels. Robert Pradke, who is known for the “chemical skin art” he has applied to many of Indian Larry’s bikes, will display pinstriping, flames, flakes, and candies applied to everything from metal to organic surfaces. Michael Lichter, who has been documenting the “biker lifestyle” in the pages of Easyriders magazine since the 1970’s will display photographic prints from his archive. Together, the bikes, photography, and painting in “School’s Out” will explore whether “Old Skool” and “New School” are still appropriate terms, or if the world of custom bike building has moved to a point where these styles have blended together, and the new mix is “All Kool”.

Mike early

Motorcycle builders in the exhibit include, Aaron Greene (Paramount Customs,) Arlen Ness (Arlen Ness Enterprises, CA,) Bill Dodge (Blings Cycles, NJ,) Billy Lane (Choppers Inc., FL,) Brian Klock (Klockworks, SD,) Cory Ness (Arlen Ness Enterprises, CA,) Dave Perewitz (Cycle Fab, MA,) Donnie Smith (Donnie Smith Custom Cycles, MN,) Eddie Trotta (Thunder Cycles, FL,) Hank Young (Young Choppers and Hotrods, GA,) Indian Larry (an original Indian Larry custom, NY,) Indian Larry Legacy (Paul Cox & Keino Sasaki, NY,) Jerry Covington (Covington’s Cycle City, OK,) Kendall Johnson (Kendall Johnson Customs, NC,) Kim Suter (K. C. Creations, KS,) Kirk Taylor (Custom Design Studios, CA,) Mark Warrick (Soncy Road Speed & Custom, TX,) Michael Prugh (Independent Cycle Inc., SD,) Paul Yaffe (Paul Yaffe Originals, AZ,) Roland Sands (Roland Sands Design Inc., CA,) Steve Broyles (Stevenson’s Cycle, MI,) Twisted Choppers (Jason Kangas & Kai Morrison, SD,) Vince Doll (Redneck Engineering, SC,) and Warren Lane (The Neighborhood King, FL.)

Mike

Michael Lichter’s past exhibitions like Kick Start (’03,) Bob’s Back (’04,) and Speed Demons (’05,) at the Journey Museum, were very successful and covered by many US motorcycle publications including Easyriders, American Iron, V-Twin, Thunder Press, many foreign publications and newspapers. Past exhibits were also featured on television on the Discovery Channel, Speed Channel, OLN, Travel Channel, and local area TV stations. The move to Thunder Road in Sturgis this year is expected to attract even more visitors than in the past.

The “School’s Out” exhibition, which has been made possible by the generous support of Danny Gray Seats, Metzeler Tires and Sturgis Bike Week Productions, will be open to the public on Saturday, August 5th and remain open through Saturday, August 12th from 11 a.m. until midnight. Admission to the Thunderdome will be $10 during the AMD World Championship of Bike Building show August 5-7, $5 during the Rats Hole show August 11th, and FREE August 8-10 and August 12. The public is invited to meet many of the artists and motorcycle builders who will be present on Tuesday, August 8th from 4:00 – 6:00pm.

Mikeparamount

Metzeler Tires, a “Schools Out” exhibition sponsor, has organized its fourth annual Custom Bike Competition all day Tuesday, August 8th inside the Thunderdome. Custom motorcycles using any of Metzeler’s tires, from standard sizes to their super wide 300, will be welcome to enter. Following the competition an awards presentation will take place at which the best of show winner will be awarded an advertising campaign featuring the winning custom bike builder.

Also taking place at Thunder Road will be Rick Fairless’s Strokers Sturgis, The Biker/Penthouse bike show, the AMD World Championship of Bike Building, Miss Sturgis, The Texas Bikini Team, outside vendors, and more. Thunder Road is a part of the Glencoe Nation and is located directly in front of the Glencoe campground, which will be host to Rock’n The Rally, an event that will have over 20 national music acts including Big and Rich, Cheap Trick, Sammy Hagar, The Steve Miller Band, and Nickelback.

Thunder Road is located 3 miles east of Sturgis on Highway 34, and is home to the premier bike builders and vendors During Sturgis Bike Week. Additional information is available at www.thunderroadsturgis.com

GLENCOE LOGO

HOT ACES REVTECH BANNER

100Polished

ON LINE, ALL CLASS GAMBLING AND YOU COULD WIN A $7000 ENGINE–A HOT new RevTech engine for $50.00!!! That’s right, Bikernet and Hot Aces Casino are sponsoring a contest to win a new $7,000 HOT ROD, REVTECH engine. Just click on the link belowr, make a $50.00 deposit* you will then have a chance to win this great engine. Not only that, but make your $50.00 deposit and Hot Aces Casino will add an additional $25.00 bonus. So $50.00 = $75.00=A chance to win a new engine and who knows perhaps a jackpot or royal flush or a great day at the tables!!!

Click here www.hotacescasino.com register, make your $50.00 deposit and enter the code ENGINE. You will be automatically entered into the drawing. Drawing to be held July 14, 2006.

REVTECH BANNER

*see promotion terms and conditions at www.hotacescasino.com

Continued On Page 2

Read More

June 15, 2006 Part 4

BIKERNET NEWS FINAL ALERTS–HAWAIIAN SHOWFEST, H-D V-ROD KIT, STURGIS MUSEUM ADDITIONS, BOB MUSSO GETS JOB, WIN A 100 INCH REVTECH ENGINE, ANOTHER DEAL OF THE WEEK AND JIMS TOOL OF THE WEEK AND I’M OUTTA HERE

Continued From Page 1

PARAdise2

PARADISE BIKEFEST&BIKE BUILD-OFF–Join Pasha Hawaii, Budweiser, Pacific Rim Cycle, BMC Choppers, South Seas Harley-Davidson, Cycle City, Domenico’s, Mikey’s Speed Shop, Carr’s Insurance Agency, Big Fat Tatts, Rosa’s Ice Tee, and Island Tattoo on Sunday, July 2nd at Kapaiolani Community College for Hawaii’s biggest motorcycle rally ever.

Beginning with a press conference at 3:00pm on Friday, June 30th, at Honolulu’s Hard Rock Cafe motorcycle enthusiasts and fans of Discovery Channel’s “Great Biker Build-Off” series will join “The Big Schwag” from Discovery Channel’s Monster Garage, and Internationally celebrated motorcycle builders such as, Big Mike of BMC Choppers, the legendary Sugar Bear, Shannon Aikau of Count’s Kustoms, Puerto Rico’s Jose De Miguel of Caribbean Custom Cycles, and Shannon Aikau of Las Vegas’ Count’s Kustoms.

The Paradise Bikefest & Bike Build-Off will be held on Sunday, July 2nd, at Kapiolani Community College (KCC).

Sunday’s rally will begin with a memorial ride paying tribute to Jimmy Aikau (father of custom builder Shannon Aikau and cousin of legendary surfer Eddie Aikau), and custom builder phenomenon Johnny Chop who passed away earlier this year.

Beginning at 9:00am at Cycle City Harley-Davidson (600 Puuloa Rd), motorcyclists will ride to Waimea Bay for a short ceremony paying respect to two of the motorcycle cultures greatest motorcycle builders.

There will be no charge for the ride, but those wishing to enter the festivities at KCC will be required to pay an entry fee of $15.00 ($10.00 advance) at the end of the ride.

Once inside KCC, spectators and participants will be treated to Hawaii’s biggest motorcycle event ever! Along with some of the World’s top motorcycle builders and their bikes made famous on television and numerous motorcycle magazines, visitors to this year’s event will actively engage in the festivities by voting on the build-off bikes from Oahu’s own Nui Kauhane of Grumpy’s Customs and Noah O’Geen of Maui’s Hot Rod Alley.

These two builders have had just eight weeks to build their versions of the “Hawaii’s coolest” bike. Nui’s reputation as one of the top builders of the “Local Boy” style will be on the line when he takes on Noah O’Geen. One of Hawaii’s best up and coming motorcycle craftsmen, O’Geen’s creations has been featured on the cover of Hawaiian Chopper Magazine.

In addition to the featured bike build-off, a “ride-in” motorcycle contest offers local builders, owners, and businesses the opportunity to enter their bikes into the various categories offered for a chance to take home specially made, one-of-a-kind trophies, as well as other prizes to be announced.

Categories for the ride in show are, vintage (1936 & below), classic (1937-1965), shovelhead era (1966-1983), EVO era (1984-present), Custom Class (modified), Radical Custom Class (heavily modified), Rat Bike Class, Custom Metric Class, Street Bike Class, and Trailer Queen Class (bikes trailored into the event).

A bikini contest featuring some of Hawaii’s most beautiful women will be held on the main stage, with cash prizes being given to the top three. A registration party will be held at Panama Hatties (above Dixie Grill in Aiea) on Thursday, 29 June (7-10pm). In addition to registration party, Sensually Yours will put on a lingerie show, which is open to the public, and Bo Irvine’s Sharky’s Comedy Club will have great stand up comedy being performed.

For more information on the schedule of event, or how to register for one of the events, visit, or call 808-780-2998.

VROD WIDE TIRE KIT

NEW WIDE REAR TIRE KIT FOR HARLEY-DAVIDSON V-ROD–MILWAUKEE (May 29, 2006) – The new V-Rod Wide Rear Tire Kit ($3,495.95) from Harley-Davidson Genuine Motor Accessories gives many 2005-06 Harley-Davidson VRSC V-Rod models the same menacing, full-fender look first offered on the 2006 Screamin’ Eagle V-Rod model. The kit includes a Dunlop D419 240R/18 rear tire to replace the standard Dunlop 180/55ZR18 74W tire, plus an 18-inch Reactor five-spoke custom rear wheel and matching Reactor sprocket, a chrome wide-tire swingarm, a chrome sprocket compensator bowl, chrome upper and lower belt guards, 38mm-stroke shock absorbers, and a primed rear fender.

No frame or powertrain alterations are required for installation. Rear fender color-matched painting service may be arranged through the Harley-Davidson Spectrum Paint Program. Add a matching Reactor 19-inch front wheel (sold separately) for a complete custom conversion.

A V-Rod Wide Rear Tire Kit is available to fit 2006 VRSCA and VRSCD models (P/N 43687-06), and 2005 VRSCA and VRSCB models (P/N 43820-05). A new Fender Base Plate Kit (P/N 51098-06, $129.95) fits the wider fender and provides the attachment point for upright and luggage rack options. See dealer for ordering and fitment details.

For additional information on Harley-Davidson Genuine Motor Accessories, see your local Harley-Davidson dealer or visit the Harley-Davidson Web site at www.harley-davidson.com. To find a dealer near you, call toll free 1-800-443-2153 in the U.S.A. or Canada.

STURGIS MM NEW LOGO

NEW ARRIVALS EXPAND STURGIS MOTORCYCLE MUSEUM COLLECTION– June 2006 – – The Sturgis Motorcycle Museum & Hall of Fame is revving up for the summer season with the arrival of seven incredible new motorcycles on loan from Kenny Price, owner of Samson Motorcycle Products, as well as a new exhibit.

STURGIS MM INDIAN

The Museum has just opened its newest exhibit entitled the British Invasion, showcasing giants such as Triumph, BSA and Norton. “Late last year Kenny Price loaned us two bikes rarely seen in this country, a 1928 Calthorpe and a 1926 Levis. That led me to think we should build an exhibit around the profound impact British bikes have had on motorcycling history,” states Executive Director Pepper Massey-Swan. “We’ve just received two more prime examples from Price, a 1949 HRD with an immaculate Garrard sidecar and a Matchless with an unusual two person, tandem sidecar.”

STURGIS MM INDIANS

In addition to the new British bikes, Kenny Price has loaned a prewar BMW, a 1947 Indian with sidecar, a 1923 Indian Chief (introduction of the 1200cc Big Chief), a 1927 Indian Scout (introduction of the 750cc 45ci Scout), and an exceptional 1918 Indian model O.

“I’ve settled on so many Indian motorcycles because they are significant not only to motorcycling in general, but more specifically to the history of Sturgis,” said Massey-Swan. Pappy Hoel, founder of the Sturgis Motorcycle Rally and Races, sold Indian motorcycles from 1936 until 1953, much of that time at his shop on Lazelle Street. He was very successful at making the brand a household name in Sturgis and the surrounding area, even earning top dealer in the nation in 1947.

TC88 TOOLS

GEORGE’S TC88 SPECIALTY TOOLS–This latest selection of H-D dedicated specialty tools from GEORGE’S GARAGE were developed specifically to make wrenching on TC88 engines smooth and hassle free. A must for both professional and amateur mechanics these finely crafted tools feature the materials friendly to the tools application and hands on testing for precise function. Pictured here clockwise starting from top left are: TC88 Camshaft Remover and Installer ($102.95), TC88 Cam-Crank Gear Locker ($30.95), and Cam Chain Tension Unloader ($28.95). The Cam Remover/Installer allows you to remove and install front and rear cams.

At the same time it aligns the cams for a smooth press in and out of the support plate. Made of Delron to eliminate any chance of damage to gears George’s TC88 Cam-Crank Gear Locker secures the gears in place while removing or installing the nut.

Made of hardened steel and anodized black the Cam Chain Tension Unloader allows you to quickly and simply relax tension on the chain and then hold the assembly in that position by inserting the supplied pins from the front and rear.

For complete details call 909-843-7043. On the Web at www.georges-garage.com.

PRO ONE MUSSO

BOB MUSSO APPOINTED DIRECTOR OF DEALER DEVELOPMENT AND MOTORCYCLE SALES AT PRO-ONE– Strategically timed to coincide with the introduction of their exclusive line of OEM custom motorcycles, PRO-ONE is pleased to announce the appointment of Bob Musso as Director of Dealer Development and Motorcycle Sales.

Having spent the last two decades involved in virtually every aspect of the industry, from enthusiast and builder to manufacturer, shop owner, and most recently Director of Product Development and Marketing strategist, Musso possesses all the credentials PRO-ONE could ask for in an individual filling such a specialized and complex position.

Initially Musso will be cultivating a select number of highly qualified dealers throughout the U.S. Once established this network of PRO-ONE dealers will provide enthusiasts with easy access to all the latest models and customers with the high level of service and satisfaction PRO-ONE has built its reputation on.

Additionally, Musso will provide new dealers with flooring assistance, guidelines for service and sales integrity and insight into financing OEM customs.

Musso’s thorough understanding and involvement in both the OEM and aftermarket is certain to provide PRO-ONE with smooth sailing as they expand their OEM Custom Motorcycle manufacturing and sales efforts world wide.

Potential dealers should contact Bob Musso direct on the PRO ONE DEALER DEVELOPMENT LINE at 1-800-605-9935 or

HOT ACES REVTECH BANNER

100Polished

ON LINE, ALL CLASS GAMBLING AND YOU COULD WIN A $7000 ENGINE–A HOT new RevTech engine for $50.00!!! That’s right, Bikernet and Hot Aces Casino are sponsoring a contest to win a new $7,000 HOT ROD, REVTECH engine. Just go to www.hotacescasino.com register, make a $50.00 deposit* you will then have a chance to win this great engine. Not only that, but make your $50.00 deposit and Hot Aces Casino will add an additional $25.00 bonus. So $50.00 = $75.00=A chance to win a new engine and who knows perhaps a jackpot or royal flush or a great day at the tables!!!

Click here www.hotacescasino.com register, make your $50.00 deposit and enter the code ENGINE. You will be automatically entered into the drawing. Drawing to be held July 14, 2006.

REVTECH BANNER

*see promotion terms and conditions at www.hotacescasino.com

full right

DEAL OF THE WEEK, FAMOUS SHRUNKEN FXR FOR SALE–That’s right the famous Bikernet Shrunken FXR, designed for the smaller rider is FOR SALE.

This bike was specifically designed for the smaller rider. It’s a rare, Bandit built, one-off custom motorcycle-all new. Only $28,000 obo, (310) 830-0630,

JIMS995

BIKERNET JIMS TOOL OF THE WEEK–No. 995 – Use on all 2006 to present Dyna Engines. Use this tool to “break” the case sealant by pushing apart both case halves. Bolt (with supplied hardware) this tool to the primary mounting holes, hand thread-in pushing screw (do not use impact tools). Flywheels will be pushed from the left case.

2006 Dyna Case Splitter Tool

Jims Banner

BIKERNET READER REVIEW OF BASSANI DUALS–Just put Bassani true duals & slant cut mufflers on my 103″ Road Glide….WOW !

–Dusty

Indian scout

ANOTHER DEADLINE DOWN–I hit the news way too early and I’m slammed, but it’s a fantastic day outside and I just timed and tuned my ’48 Pan. But first, above is a shot of an Indian Scout shooting for a record at El Mirage recently. He’s running in the same class (except open) that I’m running our Bonne Belle, 45 H-D Flathead at Bonneville in September. It’s going to be a happening event.

pan carb

Back to the Pan. It’s been running rough for a while, since the airing of the Steel Dreams Show. Just before taping we tore into the Mikuni carbs. They’d been sitting around too long and I needed a fuel filter.

pan right

Since the Bonneville bikes are out to Foremost Powder Coating, in Gardena, I’ve had a few moments to tinker. I pulled the distributor and installed an auto-advance unit. I carefully static timed the beast, then tore into the carbs again. One accelerator pump was clogged. I adjusted the valves and she’s running better than ever. I even replaced my modified muffler with a complete retro Paughco job.

Dressed final

I believe that’s all I know. Even more coffee won’t help. You’re not going to believe this shit. I’m going to launch an article on winter riding apparel. I know, it’s the goddamn summer, except in Australia. That’s where the article originated.

Next, I’m trying like hell to launch new chapters of my second Chance Hogan book. Check ’em in the Cantina. By tonight I hope to have four chapters up and sizzling. Enjoy. More Bonneville Techs this weekend.

buttshot
There’s a soft ending for ya.

Ride Forever,

–Bandit

BUBs banner

Read More

June 15, 2006 Part 3

BIKERNET NEWS SPECIAL REPORTS -DISCOVERY BUILD-OFF REPORT, BASSANI 2 INTO 1, HINES HIT FIFTH, STURGIS GUIDE, NFL HALL OF FAME BIKE, MURDER TRIAL, DIRTY JOES CHROME SHOP, KIDS AND CHROME WINS, SENATOR ZEIN AT HALS, RUCKER BUILDS HOT RODS AND BAD JOKES

Continued From Page 2

BASSANI EXH

PRO RSD 2 INTO 1–All you lucky enough to be running a Right Side Drive setup really need to check out this latest header system from BASSANI. Dubbed the PRO RSD 2 INTO 1 this thing is as BAD as it looks. The layout features 1 3?4″ head pipes merging into a single 2 1?2″ True Reverse Cone Megaphone. The strictly business appearance is accented with a removable baffle element, brilliant show quality chrome, fully polished, billet aluminum end cap and an exhaust note that says it all.

The PRO RSD 2 INTO 1 is designed for use with a variety of RSD transmissions but you’ll want to call for details before ordering.

Retail for the new system is $680.00 and you can get all the fitment information by calling 866-439-4287 or visit them on the Web at www.bassanipipes.com

screamin eagle

HINES RIDES INTO FIFTH CONSECUTIVE SEMIFINAL ON BOARD SCREAMIN’ EAGLE V-RODHines Cuts Points Deficit in NHRA POWERade Championship Chase– JOLIET, Ill. (June 12, 2006) – Not only did Andrew Hines ride his Harley-Davidson Screamin’ Eagle/Vance & Hines V-Rod into the semifinal round for the fifth consecutive Pro Stock Motorcycle race, but he made the rounds count. The two-time defending NHRA series champion didn’t win the race on Sunday at the CARQUEST Auto Parts NHRA Nationals at Route 66 Raceway, but he sliced the points lead down from 36 to just 14 points behind class leader Angelle Sampey.

Hines beat teammate GT Tonglet for the third consecutive race, turning in a 7.125-second pass at 190.24 mph over Tonglet’s 7.163 at 185.54 in the first round of competition. He went on to beat Antron Brown in Round Two. Hines recorded a 7.081 pass at 188.73 while Brown fouled at the starting line on his U.S. Army Suzuki. Hines lost to Ryan Schnitz in the semifinal. Hines fouled at the starting line while Schnitz rode his Team Muzzy Buell to a 7.132 at 182.90. Schnitz went on to beat Matt Guidera in the final round for his fourth career NHRA National victory.

“It was good to make up a little ground in the championship chase,” Hines said. “We’ve been consistent on race day and have been to the semifinals every event, but we have a few things that we need to work out before we finish this three-race swing. We are making more horsepower, but we lost a little of our launch power and we need to figure that out again.”

The two-bike team is staying in Joliet an extra day just to do some testing before resuming the second of three consecutive races. The team heads to Englishtown, N.J., for the K&N Filters NHRA SuperNationals at Old Bridge Township Raceway Park this weekend before the O’Reilly NHRA Midwest Nationals kicks off at Gateway International Raceway in Madison, Ill., just outside of St. Louis, on June 23-25.

Team owner Byron Hines said the team needs to figure out a few things before resuming the current set of races.

“Overall the weekend wasn’t too bad, we just came up with the short end of the stick at the end of the day,” Hines said. “We only had three rounds of qualifying and that fourth round could have changed the complexion of the race, at least for our team anyway.”

Because of poor weather conditions, the team had just three rounds of qualifying this weekend instead of the four they normally have to prepare for eliminations day. Hines qualified third with a 7.029 pass at 190.48 while Tonglet was 14th with a 7.115 at 187.68.

“We might have been able to shake up the qualifying order and avoid racing each other in the first round, but it’s hard to say what would have happened for sure if we would have had another qualifying pass,” Harley-Davidson Racing Manager Anne Paluso said. “Our riders have faced each other in the past three events and unfortunately it’s been in the early rounds on race day. We want to see both bikes going rounds on eliminations day.”

Visit www.harley-davidson.com for more information.

MONSTER BASH FLYER

BIKERNET MEDICAL OFFICE PRODICAL–An attractive young girl, chaperoned by an ugly old lady, entered the doctor’s office.

“We have come for an examination,” said the young girl.

“Alright,” said the doctor. “Go behind that curtain and take your clothes off.”

“No, not me,” said the girl, “It’s for my auntie here.”

“Very well,” said the doctor, turning to address the aunt. “Madam, stick out your tongue.”

–from Art Friedman

AL ZAQ ILLO

FOUR GREAT RELIGIOUS TRUTHS–It is important for those of all faiths to recognize four religious truths:

1. Muslims do not recognize Jews as God’s chosen people

2. Jews do not recognize Jesus as the Messiah.

3. Protestants do not recognize the Pope as the leader of the ChristianWorld.

4. Baptists do not recognize each other at Hooters

–Terry M Leebove

THUNDER ROAD STURGIS BIKE WEEK LOGO

BIKERNET PHILISOPHY CLASS– * Accept that some days you’re the pigeon, and some days you’re the statue.

* Always keep your words soft and sweet, just in case you have to eat them

* Drive carefully. It’s not only cars that can be recalled by their maker.

* If you can’t be kind, at least have the decency to be vague.

* If you lend someone $20 and never see that person again, it was probablyworth it.

* It may be that your sole purpose in life is simply to serve as a warningto others.

* Never put both feet in your mouth at the same time, because then you won’thave a leg to stand on.

* Nobody cares if you can’t dance well. Just get up and dance.

* Since it’s the early worm that gets eaten by the bird, sleep late.

* The second mouse gets the cheese.

* When everything’s coming your way, you’re in the wrong lane.

* Birthdays are good for you. The more you have, the longer you live.

* You may be only one person in the world to some people, but to one person,you may be the world.

* Some mistakes are too much fun to only make once.

* We could learn a lot from crayons. Some are sharp, some are pretty andsome are dull. Some have weird names, and all are different colors, but theyall have to live in the same box.

* A truly happy person is one who can enjoy the scenery on a detour.

–Ramon

STURGIS GUIDE BANNER

THE STURGIS GUIDE– This year, American Big Twin will be distributing the mostsought-after guide to the Sturgis/Black Hills Rally.

The Guide is more than just great coverage of Sturgis, It also covers events all over region, and enthusiasts will refer to it again and again.

AD CLOSING: June 23

MATERIALS DUE: July 5

CALL BECKY DEMMERLE FOR DETAILS!
800-225-4569 ext. 3163
mailto:bdemmerle@advanstar.com

Levis ad

HALL OF FAME BIKE UNVEILED–Last Sunday OCC showed up at RALPH WILSON stadium in Orchard Park NY. The reason, to unveil the “HALL OF FAME “BIKE. The bike will be signed by players of the hall during NFL festivities and auctioned off later. The proceeds to benefit HUNTERS HOPE, a charity started by JIM KELLY .

JIM’S son HUNTER was afflicted by this rare disease and has since passed away..RIP HUNTER.

Now back to the event, The weather was foul early that morning but clear skies rolled in around noon. Attendance was fare. A lot of speechmaking and back slapping for Kelly and Paul Teutel, OCC’s only attendee.

Also attending were members of the USMC PURPLE HEART SOCIETY, while the bike was a disappointment the overall event was not.

GOD BLESS THE TROOPS THAT SERVE THIS COUNTRY …

–TOMBSTONE

guilty

BIKERNET STAFFER ON TRIAL-THE OUTCOME–A defendant was on trial for murder. There was strong evidenceindicating guilt, but there was no corpse. In the defense’s closingstatement the lawyer, knowing that his client would probably beconvicted, resorted to a trick.

“Ladies and gentlemen of the jury, I have a surprise for you all,” thelawyer said as he looked at his watch. “Within one minute, the personpresumed dead in this case will walk into this courtroom.” He lookedtoward the courtroom door. The jurors, somewhat stunned, all looked oneagerly. A minute passed. Nothing happened.

Finally the lawyer said, “Actually, I made up the previous statement.Butyou all looked on in anticipation. I, therefore, put it to you that youhave a “reasonable doubt” in this case as to whether anyone was actuallykilled, and I insist that you return a verdict of not guilty.”

The jury, obviously deep in thought, retired to deliberate. After ashort while, the jury returned, and pronounced their verdict of”guilty”.

“But how?” inquired the lawyer. “You were proven to have had some doubt.I watched all of you as you stared at the door in anticipation.”

The jury foreman replied: “Yes, you are absolutely correct, we did lookin the direction of the door… but your client didn’t.”

–from Ray Russell

DIRTY JOES CHROME SHOP BANNER

CHROME SHOP GETS NEW OWNER, CLEANS UP WITH NEW NAME, DIRTY JOE’S–Dallas entrepreneur Joseph Mauro has purchased one of the industry’s longest-running chrome and powder coating shops at 11702 Plano Road in Dallas. Mauro has renamed the company to Dirty Joe’s Chrome Shop and has immediately expanded the business with more than $100,000 in technology and other improvements.

“In the 25 years this shop has been serving motorcycle and hot rod customizes, never has there been an owner on-site managing the company day-to-day,” said Mauro. “I decided to buy the shop because being a longtime chrome enthusiast myself I knew the company had a strong following. I also believed there was enormous potential for an owner with a hands-on leadership style to grow this business on a much larger scale.”

In the last few months, Mauro says Dirty Joe’s has tackled everything from chroming a stovetop and barbecue utensils to jet packs and high-end airplane components. The shop also chromes for a list of celebrity customers, including stuntman Dan Schlund, better known as the “Rocketman” of the Superbowl games, fitness guru Larry North, and TV motorcycle personalities around the world.

KIDS & CHROME 2006 BANNER

Kids & Chrome ’06: THE WOW FACTOR!–People who missed the boat for last year’s inaugural Kids & Chrome event, SPONSORED BY BIKERNET.COM, during Sturgis week are scrambling to get on board this year. “Wow!” says event Director of Fundraising Bob Illingworth.

“Everyone in the industry wants to be a part of Kids & Chrome. People were amazed by last year’s event. First time out of the chute, it was classy and fun, with the opportunity to truly make a difference for kids. With over 100 sponsors already signed on, 2006 will raise the bar even higher–Kids & Chrome II will blow people away.”

Kids & Chrome is a fundraiser being used to build a new Children’s Hospital in Rapid City that will serve special needs kids from across the nationKids & Chrome banquet is Wednesday, August 9 at the Black Hills Convention Center in Spearfish.

Doors open at 5:00 pm for “meet and mingle” time with open bar, plus the chance to bid on a huge variety of silent auction items. A five-star dinner will be served at 7:00.

Tickets to the event are $175.00 each and can be purchased at www.kidsandchrome.com or by calling (605) 782-2331. Here are just some of the highlights of the 2006 Kids & Chrome event:

Presentation of the Teresi Prize. $100,000 in advertising will be awarded to an individual or company that has developed an outstanding product, service, design or invention introduced at the V-Twin Expo in Cincinnati or Daytona Bike Week during the current year.

Amazing live auction items! and drawings for two incredible motorcycles: an $80,000 custom by Jerry Covington, and a $45,000 custom bagger from Thunder Mountain Customs.

Scott Jacobs, commissioned by Harley-Davidson to create a painting of acclaimed racer, and 2006 Sturgis Motorcycle Hall of Fame inductee Jay Springsteen, has chosen the Kids & Chrome Wednesday evening dinner to unveil his new piece and auction off the first signed Giclee.

Artist David Uhl created a sensation when he painted the beautiful and complicated vision he named Ruby. He will rework his famous sold-out masterpiece and offer a one-of-a-kind version of Ruby to be auctioned at Kids & Chrome.

Jeff Decker, renowned motorcycle sculptor, has just announced he will recreate “Ruby” in bronze, one more time, in honor of Kids & Chrome. Jeff’s sculpture will also be auctioned off Wednesday evening.

Two signed guitars are up for grabs, one signed by country crooner Alan Jackson and a second by rocker Ted Nugent

A custom bobber from Desperado Motorcycles signed by the nation’s top builders will be on the auction block,.

A new fundraising addition to Kids & Chrome in 2006 is Billy Lane’s Builder’s Breakfast, set for Tuesday, August 8th at 9:00 a.m. at the Broken Spoke Saloon. Join today’s top builders for eggs and orange juice and have the unique opportunity to bid on some out-of-this-world silent auction items. Funds raised from the Breakfast will be presented at the event on Wednesday evening AND Billy plans to auction off his prized Discovery Channel Biker Build-Off trophy that night to raise more funds.

For more information on Billy Lane’s Builder’s Breakfast and ticket availability call 321.757.7262 or visit www.choppersinc.com.

There is much, much more in the works. Stay posted through the Kids & Chrome website, www.kidsandchrome.com,

contact Bob Illingworth 623.544.2923

For more information on raffle tickets and event tickets, visit www.kidsandchrome.com,.

GIRLSHOT

PAY ATTENTION–Senator Dave Zien will be at Hal’s Harley-Davidson in New Berlin on June 27, 2006. Plan on coming out to support this nationally acclaimed motorcyclist’s rights legislator. Dave has authored every major motorcycle bill in Wisconsin since he’s been in office, on behalf of ABATE of Wisconsin.

Now’s your chance to come out and hear him speak, see his motorcycle with nearly 1 million miles on the odometer and donate some cash to make sure he can continue to represent our interests in Madison. I’ll be there. Where will you be?

–Tony Pan Sanfelipo

flaming skull

RUCKER PERFORMANCE LAUNCHES HOT ROD DIVISION– With the introduction of Tommy Eddleman, Automotive Shop Manager, Rucker Performance has become the leading headquarters for high performance street rods and professionally restored vehicles. Tommy manages the procurement of all automotive parts and the production of hot rod and muscle cars from start to finish. An experienced automotive technician and parts sales veteran, Eddleman brings more than 25 years experience to Rucker Performance.

Rucker Performance has the in-house capability to complete full frame off vehicle restoration and build brand new cars from concept to sheet metal and body mold fabrication, custom paint, engine modification and restoration.

The Rucker Performance team always ensures that each owner has the best machine design, most innovative technology and comfort level. Tommy believes that there is always a way to make a car look and run better. Indeed we are doing just that at Rucker Performance.

Kim Suter
Kim Suter’s sharp bike.

Meeting
The build-off bikes meet.

BIKERNET REPORTER EMBEDDED IN DISCOVERY CHANNEL BUILD-OFF COMPETITION–I am in Marion IL. on my way to Two Harbors.I did a few more miles yesterday than I originally planned and now have only 783 to go.I will be headed for Chicago after breakfast.

Gypsy bike
Gypsy’s bobber.

–Rogue
Motorcycle Hall Of Fame Member 2005

NIGHT POEM

LATE NIGHT RIDE–
Turn Of The Key
Flick Of A Switch
Push Of A Button
She Roars To Life

Tighten My Gloves
Drop Down My
Orange Colored Shades
I Look Ahead As
The Headlight Shows Me
The Way

Burp The Throttle
Pull In The Clutch
Ease into First Gear
Rock The Throttle
As I Ease Out The Clutch

Taking Her Slow And Easy
I Head Down The Road
As I Try To Avoid
University’s Pot Holes

Turning On To 58
I Give Her A Little Goose,
Across A Patch Of Hidden Sand
But She Didn’t Come Loose
Out To Uncle Dales I Ride

We Talk About Choppers,
Rat Rods, And How
Wallcott’s Truck Show
Is Coming Up Soon

I Finish My Drink
Then I’m On My Way
Time To Head On Home
And Put The Bike Away
Until Tomorrow Brings
Another Day

— Joshua Griffith”
panheadjosh74@hotmail.com

BIKE AND GIRL
Shot from Bikerpics.org.

Continued On Page 4

Read More

June 15, 2006 Part 2

BIKERNET NEWS FLASH -THE THROTTLER WORKS, ROMINE TAKES THIRD, BIG DOG MAKES 20,000TH BIKE, STURGIS DIGS AVAILABLE, RIDE TO WORK QUICK, DEAL OF THE WEEK, STEALTH AT SMOKEOUT, CYCLE SNITCH FOUND, WORLDS FASTEST DVD OUT, AND BILLY LANE SCRAMBLES EGGS

Continued From Page 1

Throttler

“THE THROTTLER”–Complete Throttle Management at Your Fingertips–The engineers at 50’s Boy have just announced the introduction of an updated version of their immensely popular motorcycle cruise control. Shown here, the “THROTTLER” offers the performance, comfort and convenience of a dedicated throttle management system and the safety benefits of Anti-Lock technology. That’s right, now you can experience the benefits of a true cruise control without the unreliability and hassles common to other aftermarket devices.

Easily and quickly installed over the grip of virtually any motorcycle, the “THROTTLER” allows you to throttle up or down instantly and safely. Designed and manufactured by 50’s Boy, the “THROTTLER” provides precise, at your finger tips, speed control with the associated benefit of enhanced fuel economy. The “THROTTLER’S” patented roller ball detent design, allows on the go engine speed adjustment. Eliminate dreaded hand fatigue once and for all and put the enjoyment back into those extended rides with the “THROTTLER.”

For complete details contact 50’s Boy at 866-542-1955 and visit them on the Web at www.50sboy.net

screamin eagle

ROMINE TAKES THIRD NITRO HARLEY-DAVIDSON VICTORY OF THE SCREAMIN’ EAGLE AHDRA CHAMPIONSHIP SEASON–NORWALK, Ohio (June 12, 2006) – Mike Romine is making all the right moves to defend his Screamin’ Eagle AHDRA championship. The rider of the Harley-Davidson Top Fuel motorcycle earned his third Top Fuel victory of the season Sunday at the Roeder Harley-Davidson Buckeye Nationals at Norwalk Raceway Park.

Making his fourth final round appearance in the sixth event of the Screamin’ Eagle championship season, Romine rode his Nitro burning Harley-Davidson to a 6.460-second pass at 214.69 mph to top Tak Shigematsu’s 7.179 at 160.92. Shigematsu left the line first, using a .059-second reaction time to get a quick start against Romine’s .114 reaction time. Romine made up the difference by the finish line, padding his points lead.

Shigematsu qualified in the No. 1 spot for eliminations with a 6.419 pass. Romine rode his Salt Lake City-sponsored Harley into the No. 3 spot in qualifying with a 6.500 run, with Jay Turner qualifying second with a 6.443.

Don Stratton Jr. took the win in the Destroyer category, his second of the season. Stratton – the winner of the first Destroyer event of the season – beat Brian Fox with a 9.327 run at 141.46 to Fox’s 9.383 at 139.72. Michael Ray was the top qualifier, using a 9.250 run to take the No. 1 position going into eliminations. Stratton Jr. was second with a 9.278.

Eleanor Walker earned the victory in the SEP category Sunday. Walker rode her Harley-Davidson to an 11.514 to beat Josh Perry’s 11.591.

Bon Drapp earned the ET category win. He took off first, using a .023 reaction time to aide his winning 9.893 pass to top Robbie McCaa’s 12.649.

The next AHDRA event is the Kresto Pacific Nationals presented by Destination Harley-Davidson, Downtown Harley-Davidson and Eastside Harley-Davidson. The action kicks off June 24-25 at Pacific Raceways just outside of Seattle.

BIG DOG LOGO W BIKE

BIG DOG ROLLS OUT 20,000th MOTORCYCLE–WICHITA, Kansas (June 9, 2006) – Big Dog Motorcycles??, the leader in the high-style cruiser niche, the number two American V-Twin motorcycle manufacturer, and the largest manufacturer of custom motorcycles in the world, today unveiled its 20,000th motorcycle and named its 100th dealer.

The 20,000th production milestone kick started the company’s second annual Tornado Rally, Kansas’ only national motorcycle rally and was reached just twelve years after the company’s inception.

“The production of our 20,000th motorcycle is symbolic of the company’s success in the marketplace and the rider’s continuing demand for high style cruisers,” stated Sheldon Coleman, company founder and CEO. “Reaching such a major milestone, the first for any custom cruiser manufacturer, especially so early in our history, demonstrates the strength of the company, an unmatched level of manufacturing experience, and our commitment to the motorcycling lifestyle.”

Big Dog Motorcycles began in 1994 in Sheldon Coleman’s garage in Wichita, Kansas. Since then, the company has grown to 175,000 square feet employing over 300 building over 5,000 motorcycles per year. The manufacturer’s motorcycles, as well as its growing line of accessories, parts, and apparel, are sold nationwide now through 100 dealers.

BIG DOG BIKE

“It’s with a great amount of pride that I look at our 20,000th,” Coleman continued.

The celebrated motorcycle is a 2006 K-9 with a midnight sapphire frame and custom patriotic graphics. A patriotic theme has donned all commemorative motorcycles. The bike also sports a 20,000th icon on each side of the tank.

“We chose the K-9 for such an honor because it was introduced this year, is our top seller for this time in our history, and won the V-Twin Bike of the Year award,” Messer explained. “In addition, the K-9, with its nine-foot long stance, aggressive styling, rear 300 tire, and a-frame swing arm suspension tremendously demonstrates our design capabilities and our commitment to market demands.”

Big Dog Motorcycle Number One was a 1994 Vintage Classic, a nostalgic custom cruiser built by Sheldon Coleman. The company’s 100th motorcycle was a 1996 ProGlide, a smooth-riding rubber-mount. A 1999 Bulldog represented the Big Dog Motorcycles’ 1,000th. Four years later, the company rolled out number 5,000: a 2003 red, white, and blue Chopper. The 10,000th motorcycle landmark was reached in 2004, represented by a Ridgeback, an aggressive rigid chopper-style cruiser.

“It took five years to hit a thousand bikes and just seven years to build 19,000 more,” Messer said. “This stunning growth proves customer acceptance of our motorcycles and elevates Big Dog Motorcycles to the leader in this highly competitive niche. Demand for custom motorcycles continues to rise and Big Dog Motorcycles, with its dedicated network of dealers, suppliers, and employees, is extremely well-positioned to get thousands more on the road,” Messer continued.

Employees began assembling the 20,000th motorcycle on May 18 and completed it on May 19. ESPN2 was on site to capture the entire manufacturing process, from the frame building and powder coating, to the graphics and motor assembly, to the final production and test ride. The segment will air nationwide in August 2006.

“The 20,000th motorcycle pays homage to the hard work that our employees put in every day. Their dedication and passion make it possible to reach all of our goals,” Coleman added. “A few have been here since the company started, many for years, and some just a few months. To each of them, this milestone assures them they work for a solid company and in an amazing industry.”

Big Dog Banner

STURGIS HOUSE FOR RENT

STURGIS RENTAL AVAILABLE–If your looking for a great rally rental 2 miles out of town in the Black Hills with a killer view and lots of property to park your bikes, check out this. $2800 for the rally! 3br 2 bth on 1 acre.

For more info call Mike Stevenson @ 818 8919055

US Chopper banner

BIKERNET PATCHES COMING, PLAN ESTABLISHED–Hey mate, lets get some patches happening for guys to sew on their riding vests and jackets.

I suggest (of course) my famous red patch, bright yellow letters, FTSL.

And for you and the folks fighting the EPA… LOUD…Let owners (who) Understand Decide.

I kinda like the LOUD one myself.

You can obviously fit the Bikernet name on the patches somewhere.

My old FTSL patch is about five inches long by two high.

A few guys on the forum liked FTG fuck the Government also.

I was also thinking of something more unique, better than a baseball cap, how about a military style beret with a bikernet logo on it?

Must be a military supplier who can sell them cheap in bulk?Then you just need an artist to design a badge?I’ll leave the color of the beret up to you.I like the bright red military police ones myself, would kinda takes the piss out of the Milcops also..LOL.

Hey it’s 5am here, I got to do something to keep busy.

–Laterz: Jaq.

Old shot

BIKERNET.COM QUOTE OF THE DAY–“We change the world not by what we say or do, but as a consequence of what we have become.” – Dr. David Hawkins

RIDE TO WORK INC

RIDE TO WORK CAMPAIGN GAINING MOMENTUM–This week, the attached letter and proclamation template were sent to the mayors of America’s 260 largest cities. Ride to Work is asking for a mayoral proclamation of support for Ride to Work Day, and for free parking at all meters and municipal ramps on this day. Please encourage your city’s leaders to support Ride to Work Day by contacting them directly – by calling or forwarding to your mayor the attached RTW documents – and by sending your own message encouraging local support.

Your direct effort will make a real difference in the number of cities that recognize Ride to Work Day this year.

http://www.ridetowork.org/files/master/mayors/mayor_letter.pdf RTW Day Letter to Mayors (PDF)
http://www.ridetowork.org/files/master/mayors/proclamationtemplate.pdf Proclamation template (PDF)
http://www.ridetowork.org/files/master/mayors/proc_qa.pdf Q&A information (PDF)
http://www.ridetowork.org/docs/2005_trans_faq.pdf Motorcycling Fact Sheet (PDF)

Ride to Work Day, a 501 c4 nonprofit organization, can be reached at: POB 1072, Proctor, Minnesota, 55810 USA
http://www.ridetowork.org
218 722 9806

CRO

BIKERNET DEAL OF THE WEEK–Caleb here… hope the mail finds you well. If you get the chance let me know what your schedule is, I would love to scoot by your shop and bug ya some time soon. I’m pluggn away at a couple of builds, a ’56 Pan, an Evo and a rat ’72 Shovel. Just about done with some rollers that I will be throwing out there for folks to scoop up. I’ll pass that along as soon as I have some pics. The Blue bitch will be up for sale soon so I can finish these other projects, so keep an eye out.

–Caleb “cro” Owens
cro customs inc.
Venice California
310-923-2613
www.crocustoms.com

STEALTH BIKEWORKS BANNER

STEALTH REPORT FROM NC–We are burning the midnight oil here at STEALTH BIKE WORKS in preparation for The Horse Smoke-Out June 23rd and 24th at the Rowan County Fairgrounds in Salsibury NC., about 35 miles north of Charlotte.

We have been busting knuckles on Chopper John’s rigid, 93″ Sporster. It is going to be a cool bike, bobber style, 16″ Apes, handmade gas tank, handmade oil tank, handmade battery box, handmade sissy bar. I got 3 cuts on my hands last night but I really enjoy getting in the back and getting my hands dirty. “THE MEANEST” kinda frowns at me when I tell her that? We have until next Thursday to finish the bike and no matter how late we have to stay, we are going to do it. The frame and sheetmetal goes to Rusty for paint today. Last year at The Smoke-Out we were brand new and just getting our feet wet, this year we will have a STEALTH BIKE WORKS booth set up, stop and see us or give us a call at SBW 704-882-0889 or stop by at 14113 E.Independence Blvd. Matthews NC. 28104, you are always welcome!

STEALTH MIKE ON BIKE

Last night as we worked on Choppers John’s bike we got to talking about the last year since we opened and what we had learned. For me I have learned a lot from working in the back with Max. The guy is like an encyclopedia when it comes to working on bikes. He is a natural when it comes to wrenching. We are grateful to have him. I have learned more about people and human nature in the past year than I have my lifetime. Sometimes I laugh to myself about it other times I shake my head about it and other times I am just confused about it. I have learned a lot about myself too. I try to have more patience, something I have always been a little short on. I have learned that if you hang in there and keep on plugging away, good things will happen. I have learned to be grateful for what I have and not dwell on what I don’t. I have realized too that I am having the time of my life, sure it gets a little tight sometimes and sometmes there is stress involved but everything in life has some stress. I really can honestly say that I really would not trade places with anyone right now, not because of money but because I am doing what I love to do.

When I opened SBW I wanted it to be a shop that took you back to a simplier place and time. A shop to come hang out and have a good time, like our Friday night Biker NIght that we have every 3rd Friday of the month, just a time to kick back and talk bikes like I used to bo with my buddies a long time ago. The Biker Night thing is starting to catch on. I wanted SBW to be a shop that was about more than” how much money can we make.” I know we have bills to pay and so far we are doing it. I wanted SBW to be the shop that if you needed help to get your bike back on the road, that you would fell comfortable bringing and if you were tight on money, maybe we could work with you on that and so far we have and the people can not believe we do it. All you have to do is asked and if i feel I can trust you then we have a deal. I can usually spot the pretenders very easily. SBW is your basic “BIKER” bike shop, we have 3 or 4 different t-shirts, no clothes boutique just parts and bikes, that to me is what a bike shop is about.

One last thing if you have not attended The Smoke Out, don’t miss this one, there is nothing like it if you are into old school bikes!

Until next week, RIDE!
–STEALTHMAN

SUNNY

GIRL NEEDS HELP– I’m writing to pick your brain, if you have a minute. One of my girlfriends, Sunny Hobbs, is an avid NASCAR (and other types of cars) amateur/semi-pro driver. She’s been doing it for about 10 years now. She loves it, but hasn’t been able to get much sponsorship, so it’s been a side thing.

She was recently approached about being on (yet another) reality TV racing show. The producers got an initial slate of 50 participants, which they intend to whittle down to 15 via internet voting. We’ve all been voting our brains out, but Sunny keeps bouncing from between 14 and 17, and not closing the gap.

The email below just came out from the producers — if she gets some media airtime, she gets extra votes. Do you have any ideas? She’s done a couple of radio shows and some print articles, but because they were done before June 15, they don’t count for votes, and she’s out of references.

Given your background, I thought you might have some pointers. Here’s the voting link, FYI: http://www.racinforalivin.net/poll77/ Thanks in advance for any help.

–Chris

CYCLE SNITCH

“CYCLE SNITCH” High Tech GPS M/C Theft Recovery System–“At last, a motorcycle theft recovery system that actually allows you to follow your bike’s every move, in real time. “CYCLE SNITCH” has combined GPS satellite tracking capabilities with Internet technology and cellular phone antenna coverage to provide owners with the ability to keep close tabs on their motorcycle 24 hours a day, 7 days a week.

Developed specifically for motorcycle applications, “CYCLE SNITCH” is a revolutionary theft recovery system that instantly notifies you, via cell phone, of unauthorized vehicle movement. Once notified the owner can go to a private web site, by phone or PC, and instantly and continuously track the bike’s exact location at that precise moment without dealing with a 3rd party call center! Compact and easily installed on virtually any motorcycle “CYCLE SNITCH” offers benefits far surpassing anything previously available for motorcycle applications. Here are just a few.

Exclusive software platform accessible from any Internet connected device provides constant real-time tracking and alerts.

Alarm Monitoring application provides feedback on an on-going basis and immediately alerts the motorcycle owner when something is wrong!

Geo fence sends an alert when someone breaches the security perimeter of the bike”.

Wireless notification!

No Police report required to find the motorcycle!

Locate the motorcycle anytime!

Service And Product are transferable!

Continuous location reports!

98% of US, Mexico and Canada covered!

Various configurations for custom installations!

Redundant cell phone coverage!

“DO NOT” have to deal with a 3rd party call center!

For complete details call 800-346-9266 or visit www.cyclesnitch.com on the Web.

WFIWITH ANTHONY

WORLD’S FASTEST INDIAN MOVIE, STARRING ANTHONY HOPKINS, NOW AVAILABLE ON DVD THROUGH WHITEHORSE PRESS–Noted movie critic, Roger Ebert, called the World’s Fastest Indian “one of the year’s most lovable movies, Anthony Hopkins finds all the right notes to create one of the year’s most endearing oddball heroes.” If you missed it at your local cinema, here’s a chance for you, your friends, and your family to see it forever and at home! Order today and watch it this weekend.

www.whitehorsepress.com

Learn the full story behind the hit movie.Read Burt Munro: Indian Legend of Speed

The books author, George Begg, grew up on New Zealand’s South Island and raced against Burt Munro. As only an insider can, he recounts the fascinating true story of Munro and his obsession to race his 1920 Indian Scout on the salt at Bonneville at 200 mph. Includes many rare early photographs.

billy Grinding

BILLY LANE’S BREAKFAST SPONSORED BY BIKERNET.COM GROWING–Melbourne, FL- Imagine sitting down to a plate of eggs and pancakes one morning in Sturgis this August when you look up from your plate you realize this isn’t a dream, you are actually sitting with the very best builders EVER having breakfast. How could they all be at one place at the same time? Billy Lane.

Tuesday, 8-8-06 at 9AM is when it all happens. We all know the builders are at the event, but never are they all at one place and for one reason. This event is quickly becoming history in the making. Billy has rounded up the best in the industry for the 1st Annual Billy Lane’s Builder’s Breakfast in Sturgis at the world famous Broken Spoke on Lazelle St.

Bandit from Bikernet.com will be waiting tables.

This event is open to everyone. Please come! Tickets are on sale now, only online ticket holders will be eligible to win the portrait with their favorite builder photographed on site by Sara Liberte.

ALL ticket proceeds will benefit Kids & Chrome. To get your tickets online, please visit www.choppersinc.com

Ton

Continued On Page 3

Read More

June 15, 2006 Part 1

BIKERNET NEWS HEADLINES–BLADE WELDERS, 100TH BIG DOG DEALER, 4-CORNERS MOVES, JESSE JAMES POLISHES, BUILD YOUR OWN TANKS, VON DUTCH BUILDS FOR STURGIS, AMERICAN IRONHORSE BUILDS FOR MAVERICKS AND DESIGN YOUR OWN DERBY, WHAT COULD BE BETTER

Lead

Hey,

I learn something everyday whether I like it out not. I’ve just about fired up my new/old Delta belt sander and band saw. Here’s what John Reed advised about my poor blade selection:

You can get a blade welder, you buy a bulk length of blade cut it to length, put it in the welder and it joins each end, then you have to heat the weld red, and let it cool, to anneal it.

Rutland tools sell lengths of starett band saw blades in specific lengths,and come to a crunch you can get your saw blade the right length, grind each end so it chamfers to a razor edge about 1/4″ in on each end of blade,put some silver solder flux and warm it with a gentle negative acetyline/oxy flame until it melts, ( just under red) and touch it with just enough silver solder to let itcapillary across the surface, hold each end together with some flux, heat it, and it will join, and grind the side so its the same thickness all over.

delta

I’m still trying to reverse the reversible motor for the belt sander. Check out the cart we built. First we had to wrestle it away from a local homeless cat. I better get to the news before I get into trouble. Then I’ll tell you about my ’48 Panhead tune-up:

LIFEBIG
Big Dog’s John Nasi (standing) and LifeStyle Cycles owner Mark “Junior” Skolnick (on the Big Dog Mastiff) shake hands to finalize the Big Dog Motorcycles dealership agreement. This alliance makes LifeStyle Cycles the 100th Big Dog Dealership.

SOCAL MOTORCYCLE LANDMARK BECOMES 100TH BIG DOG DEALER–Anaheim, California – LifeStyle Cycles is pleased to announce that as of May 18th, they have become Big Dog Motorcycles’ 100th Dealer! This major announcement comes right on the heels of LifeStyle Cycles becoming a certified S&S Pro Tuning Center. “Becoming the 100th Big Dog dealer is a really big deal for us,” said LifeStyle Cycles’ owner Mark “Junior” Skolnick. “Our customers have been asking for Big Dog bikes, and we’ve known they are one the premier brands of custom production motorcycles around. The timing for this strategic alliance couldn’t have been more perfect, and being the 100th Big Dog Dealer is icing on the cake! Once word got out, we had customers calling to pre-order Big Dog bikes from us ? it’s amazing!”

Big Dog Motorcycles feels the same way. “LifeStyle Cycles has an incredible reputation with both manufacturers and consumers in the industry, and we’re excited an honored to have them on board as a Big Dog’s 100th Dealer.” says John Nasi, head of Big Dog’s National Dealer Development.

LifeStyle Cycles is carrying the complete line of Big Dog Production Custom Motorcycles including the K-9, Chopper, Ridgeback, Mastiff and Pit Bull as well as parts, accessories and the Big Dog Motorcycles line of apparel.

LifeStyle Cycles 21,000 square-foot facility is located at 1534 N. State College Blvd., Anaheim, CA 92806. (714) 490-0155. They carry 5 major brands of custom production motorcycles, including Big Dog. You can visit them online at www.lifestylecycles.com.

Ariel ad

FOUR CORNERS RALLY IN THE ROCKIES CHANGES LOCATION–The Four Corners Rally in the Rockies Motorcycle Rally, the annual Labor Day Weekend event drawing hundreds of thousands of bikers to the Four Corners Region the past thirteen years, has announced the 2006 event will be held at Echo Basin Ranch – West of Durango, Colorado. Each year the Rally has grown in size and the facility in Ignacio will no longer hold the record crowds that attend and the campers that want to stay on the grounds where the events are held.

Echo Basin Ranch is the same distance from Durango as Ignacio, but in the opposite direction. Echo Basin boasts better facilities, and more room with shaded camping on privately owned land, which will make for a better rally. Echo Basin sits to the North of Highway 160 between Durango and Cortez.

“I think it?s going to be awesome,” said Echo Basin owner Dan Bjorkman. “We have the perfect venue for this. We have a huge amphitheater that accommodates over 10,000 people on pastured ground, so even when there’s bad weather everyone’s not stomping around in the mud. We also have a lot of excellent camping. People can camp in the trees at the base of 13,000-foot peaks, over looking Mesa Verde National Park. We think it’s a great location, and we?re welcoming everybody who comes here for the rally.”

“Echo Basin is a fantastic venue,” Bradshaw said. “It will provide us with a far superior location and facilities, and allow us to continue all the activities that are a part of our rally. It is the same distance from Durango as Ignacio, so I don’t expect Durango to be affected by the move. Plus there is almost five times more dry camping area for RV’s and for motorcycle tent campers.”

For additional information, Contact Dan Bradshaw:888-901-7701, or info@rallyrockies.com

–The Rally

bunny

WINTER RIDING TIPS–We’re about to launch a story on winter riding tips. I know it’s summer, but not in Australia. Here’s a teaser:

Jack decided to go skiing with his buddy, Bob. So they loaded up Jack’s van and headed north. After driving for a few hours, they got caught in a terrible blizzard.

So they pulled into a nearby farm and asked the attractive lady who answered the door if they could spend the night.

“I realize it’s terrible weather out there and I have this huge house all to myself, but I’m recently widowed,” she explained. “I’m afraid the neighbors will talk if I let you stay in my house.”

“Don’t worry,” Jack said. “We’ll be happy to sleep in the barn. And if the weather breaks, we’ll be gone at first light.” The lady agreed, and the two men found their way to the barn and settled in for the night.

Next morning, the weather had cleared, and they got on their way. They enjoyed a great weekend of skiing.

But about nine months later, Jack got an unexpected letter from an attorney. It took him a fewminutes to figure it out, but he finally determined that it was from the attorney of that attractive widow he had met on the ski weekend.

Later that day, Jack dropped in on Bob and asked, “Bob, do you remember that good-looking widow from the farm we stayed at on our ski holiday up North about 9 months ago?”

“Yes, I do.” said Bob

“Did you, e r uh, happen to get up in the middle of the night, go up to the house and pay her a visit?”

“Well, um, yes,” Bob said, a little embarrassed about being found out. “I have to admit that I did.”

“And did you happen to use my name instead of actually telling her yours?”

Bob’s face turned beet red and he said, “Yeah, look, I’m sorry, buddy. I’m afraid I did.” “Why do you ask?”

“She just died and left me everything.”

(And you thought the ending would be different, didn’t you?)

–from Art Friedman

WCCPOLISH

WEST COAST CHOPPERS OFFERS POLISHING SERVICES–West Coast Choppers offers the same quality motor polishing found on Jesse’s bikes. Contact mailto:simo@westcoastchoppers.com and while you are at it visit our shop on line at www.westcoastchoppers.com.

WCC_BANNER2

TANK - FRANKENTANK

BUILD-YOUR-OWN CUSTOM TANK–If you’ve ever wanted to try your hand at custom fabrication, here’s a perfect starting point. Pro-One has just released a collection of WELD YOUR OWN FUEL TANK KITS that provide the perfect baseline for designing and fabricating your own custom gas tank. The kits are sold with components shown including side panels, bottom plates, tunnel, brackets and even a pop-up custom cap. Available in 3 styles, Frankentank, Tear Drop and Dagger Style, the kits can be modified and altered to your personal taste and requirements.

Retail on for the WELD YOUR OWN TANK KITS is $549.95. For complete details call 800-884-4173 visit www.pro-one.com.

BIKERPICS.ORG BANNER

GARD
Here’s on of Jack’s shots from the Seminole Hard Rock Roadhouse in Myrtle Beach, of Gard Hollinger and Seminole girls.

BIKERPICS.ORG CHECKS IN–Thanks for posting all of those images & my banner. Last night alone I received 507 unique visits, which have to be a result of my banner in Bandit’s Cantina alone. They stayed on a while too, because the hits from those visits totaled 47,542. As soon as I receive your banner it will be hung, I’m not sure where at the moment, but in a great place. I have a meeting tonight with my I.T. guy so the page will look a bit different soon.

–Jack
J.McIntyre@Barthco.com>

TOPPERS

TOPPERS FROM MR. BOLT–Did you know that those H-D fastener caps are available to the public. They make a line of fastener caps that are guaranteed. If you lose one, it chips or discolors, they’ll replace it. They are currently available through our fastener connection, DMP enterprises. Here’s more info:

My name is Derek and I own a fastener/metal finishing shop in Chatsworth, CA. We are a dealer for Gardner Westcott, Chrome Hardware Supply, Colony Machine and Midwest Acorn Nut. We also supply a complete line of stainless and polished stainless. We offer custom package kits for small to large companies.

–Derek
818 775-9804 or 1888 mrbolts
“DMP Enterprises, Inc.” info@dmpolish.com

hillbroad
New girl coming to Girls of Bikernet on Bad As Hell Road Glide.

NEW EXHAUST PROPRIETARY TECHNOLOGIES–About 750,000 people die from urban air pollution every year around the world, and an estimated 75% of global air pollution is attributable to internal combustion engines. More countries are pushing forward on stricter emission control programs. However, to many auto manufacturers and drivers, advanced exhaust processing technologies are still hard to afford.

CAT-MATE and ZEFS, Save the World Air’s (OTCBB: ZERO) proprietary technologies are highly affordable and effective solution to reduce emissions from a wide range of applications that are powered by internal combustion engines. A series of certified tests have proven that STWA technology is effective in reducing emissions from combustion engines by as much as 98%, improve overall power by 19% and enhance fuel efficiency up to 33%.

ZEFS products contain permanent rare-earth magnets, whose strong magnetic fields induce a molecular change in the fuel, and hence enable the engine to achieve a more efficient burn, better performance and a significantly lower production of toxic compounds. CAT-MATE structures with specifically shaped steel rings that aligned with the flow of exhaust before and/or after the catalytic substrate, facilitates an accelerated heat rise in the converter. The engine then experiences quicker ignition and improved heat retention in the converter.

Both products are highly cost effective to the end user, inexpensive to produce and easy to install on a wide range of applications including: motorcycles, marine vehicles, lawn equipment, generators, etc. Earlier this year, a ZEFS device was applied to a Chinese-manufactured carbureted motorcycle and results surpassed EURO3, the world’s toughest emission standards.

Save the World Air has entered into several distribution agreements in the U.S. and Asia and will continue to explore opportunities in the U.S., Canada, Southeast Asia, Australasia, Latin America and Europe.

Web: http://www.ccgir.com
E-mail:Mabel.Zhang@ccgir.com

old shot

HOW TO INSTALL a wireless security system–Go to a second-hand store and buy a pair of men’s used work boots, a reallybig pair. Put them outside your front door on top of a copy of Guns andAmmo magazine.

Put a dog dish beside it, a really big dish. Leave a note onyour front door that says something like “Bubba, Big Mike and I have goneto get more ammunition – back in 1/2 an hr. Don’t disturb the pit bulls.They’ve just been wormed and are a little edgy.”

–from Art Friedman

SPEEDBALL

VON DUTCH KUSTOM CYCLES SELECTED TO BUILD STURGIS 2006 BIKE–Von Dutch Kustom Cycleswww.vondutchkustomcycles.com has been unanimously selected by the SturgisChamber of Commerce to build the official custom bike for the 2006 SturgisMotorcycle Rally.

Von Dutch Kustom Cycles, with it’s winning bike design, theCruelworld Softail Chopper, was awarded this prestigious honor, beating outnumerous motorcycle companies, manufacturers, OEM’s and custom builders. Thebike, which has been built for the 66th Annual Sturgis Rally, will be raffledoff for charity through the Sturgis Chamber of Commerce Charitable Foundationand Sturgis Rally Charities. Raffle tickets will be available online at http://www.sturgisrallyraffle.com.

“We are excited and humbled to receive this distinguished honor,” saysVDKC COO and Chief Designer, Alex Mardikian. “Von Dutch Kustom Cycles wasbuilt on the principle of ‘Kustom Kulture.’ We plan to use this opportunitythat the Sturgis Chamber of Commerce has graciously bestowed upon us, to helpeducate the motorcycle community about Kustom Kulture, and why it is relevantto us and our fellow bike builders and enthusiasts.”

Kustom Kulture is a movement that started in 1950-60’s car and motorcycleculture and continues today. The concept at the basis of this principle isthat everyone is an individual with their own sense of style that reflectstheir personality. Kustom Kulture is an ideology that allows people toexpress themselves through the artistry of their vehicles. Von Dutch KustomCycles has infused elements of Kustom Kulture into the bike that they havebuilt for the 66th Annual Black Hills Rally.

Visit Von Dutch Kustom Cycles online at www.vondutchkustomcycles.com.

ROYAL ENFIELD CLASSIC MOTORWORKS SUMMER PICNIC–Come join us on June 23 – 25 for ourFirst Royal Enfield Family Reunion andOpen House held at our new headquartersin Faribault, Minnesota. It’s just 45 minutessouth of Minneapolis on I-35W.

There is no charge for the event or for food,but you do need to RSVP to save a spot foryour self and/or your party.

Here’s the schedule:Friday June 23 Afternoon: Arrive at our fair city and attend the open house. (Dinner will be supplied.)

Saturday June 24 Morning: Technical sessions, tours, open house, garage sale, discounts on all parts and accessories, and free shipping on all items purchased here.

Saturday Afternoon: We have an organized ride on wonderful roads ending up at an Antique Motorcycle Swap Meet and Show in a neighboring town (about 30 miles away) for an afternoon of fun.

Saturday Evening: Dinner will be supplied, door prizes awarded and fellowship had by all.

Sunday, June 25: Goodbyes and your last chance to shop.

Give us a call at 800-201-7472, or e-mail us atmailto:customerservice@enfieldmotorcycles to reserve.

All bikes and brands are welcome.

DERBY INSP COVERS

DESIGN-YOUR-OWN DERBY & INSPECTION COVERS– These latest DERBY and INSPECTUION COVERS from PRO-ONE allow you to design your own personalized covers based on a variety of interchangeable base caps and custom inserts. Machined from 6061 T6 billet aluminum and, show chrome plated or black anodized, the unique covers can be ordered engraved with the PRO-ONE design of your choice or with a smooth finish. Pick up a chrome and black base along with several different inserts and the possible combinations are staggering.

Super looks and superior quality make these unique covers the hot ticked for a quick change of face.

Applications cover 1970 through present models. For complete details call 800-884-4173 or visit www.pro-one.com

PRO ONE CALIPERS

PRO-ONE PERFORMANCE BRAKING–No matter if you’re building a ground up chopper or just want to personalize and your factory ride, PRO-ONE has a unique brake set up to meet your needs. From custom engineered assemblies designed specifically for right side drive machines to an awesome collection of billet front and rear calipers and hangers these components offer the latest in high performance brake technology and sanitary clean appearance.

PRO-ONE also manufactures one of the largest selections of custom rotors. No matter what look you’re after they have a rotor that is sure to be “just right”. Check out these examples and give them a call at 800-84-4173 for complete details.

Be sure to catch their current line of accessories and turn key custom motorcycles at www.pro-one.com

WHIPLASH COOPERFLAMES

BIKERNET WEEKLY PHOTO ART EXHIBIT–Copper Real Radio Bike from Orlando Florida.

Ride Hard,
–Whiplash Biker Photog
mailto:soffordphotos@comcast.net

IRONHORSE MAVS TEAM

AMERICAN IRONHORSE AND DALLAS MAVERICKS RAISE $23,000 FOR MAVS FOUNDATION– FORT WORTH, Texas (June 14, 2006) American IronHorse® Motorcycle Co. has teamed with the NBA Championship Finalist team the Dallas Mavericks to raise more than $23,000 for the Mavericks Foundation. The funds were raised through a four-month raffle of a Mavs-themed motorcycle built by American IronHorse. The lucky winners of the charity bike raffle are Jaime and Frieda Chacon of Rhome, Texas.

“The American IronHorse motorcycle raffle has helped make this milestone year even more special for the Dallas Mavericks,” said Donnie Nelson, President of Basketball Operations and General Manager for the Mavericks. “We are very pleased to have the community support of American IronHorse.”

American IronHorse also has a new marketing deal with the Mavericks, making it an official team sponsor with select advertising and ringside rights. The deal has already helped put the American IronHorse logo front and center in national media coverage. Outlets such as the ESPN TV network and Sports Illustrated Magazine have captured the American IronHorse logo during their regular season coverage of Mavericks games.

The Dallas Mavericks raffle bike will be appearing at various Dallas Mavericks activities in the coming months. It made a special appearance at the American Airlines Center on Sunday June 11 before the launch of the NBA Championship Game 2 of the Dallas Mavericks vs. the Miami Heat.

“We bought four tickets at a game during the regular season. I just can’t tell you how absolutely stunned we are to win this bike,” said Jaime Chacon. “We are huge Mavs fans and we’re so proud of all that the team has accomplished this year. I wasn’t a motorcycle rider before this, but I am now.”

The Mavericks bike is an American IronHorse® Legend chopper model with a custom paint scheme featuring the team colors of midnight blue, white, blue and silver, along with the Mavericks logo. This special edition bike also has a custom seat made from Spalding leather, a six-speed transmission, and a 111 cubic inch engine that produces 110 horsepower at the rear wheel.

Proceeds from the American IronHorse charity bike raffle benefited the Dallas Mavericks Foundation’s education and health programs for youth.

Continued On Page 2

Read More

2006 Paradise Bikefest

2nd place
Can you believe she came in second.

After six months of planning, Hawaiian Chopper Magazine’s Paradise Bikefest & Bike Build-Off finished with an explosion of bikers, babes, and bikes. Billed as Hawaii’s biggest motorcycle rally ever… the event lived up to all the hype with nearly 4,000 people gathering at the Kapiolani Community College campus in Honolulu over the Independence Day weekend.

Bike

wiwnner
She won the competition. Was it that smile?

Along with featured builders Nui Kauhane of Grumpy’s Customs on Oahu, and Noah O’Geen of Maui’s Hot Rod Alley and celebrities like Sugar Bear, Big Schwag, Big Mike, Jose De Miguel, Harold Pontarelli, Shannon Aikau, Roger Kuwahara and harmonica great Kevin McKay, Hawaii was treated to a motorcycle spectacle of sight & sound that will be hard to match…

Harold and BMC
Harold Pontarelli, Big Mike and mystery man, havin’ a cool one by the Lake.

Congratulations go out to Nui who was voted build-off winner for his specially built, trademark “Local Boy” creation. Nui’s hard work, and dedication to the style he helped popularize was obvious to the throngs of voters who selected his bike over O’Geen’s ’41 knucklehead, which was definitely one of the highlights of the show.

Sugar bear
TBear and friend cruising the island.

With 10 weeks to build their bikes, the two iron artisans busted their asses to unveil some of the coolest chops ever displayed at a Hawaii bike event, and both can be proud for their effort.

Bubba
The Kustom Fab “Babba” which will be featured on Bikernet shortly.

With 67 bikes entered into the drive-in bike show, and nearly 1000 bikes, and hundreds of cars in the parking lot of the school at the base of Diamond Head, Hawaii’s biker community and general public merged to create a synergy not experienced since the 2004 Choppers Only show when Billy Lane, Indian Larry, Peter Fonda, Mondo Porras, Paul Cox, Jose De Miguel, Bandit, and a host of other greats joined Hawaii’s Ohana for a party unmatched before this year’s rally.

The Build
Build-off winner, Nui.Wish we had a shot of his bike.

Noah and bike
Wait, there's Noah, the other build-off contestent and his bike.

Nui and bike
I bitched so Steve sent me a shot of Nui and his Island Boy. Maybe I can squeeze a feature out of him on both bikes.

Over 30 vendors, and 15 sponsors showcased their wares, and celebrated Hawaiian Chopper Magazine’s 2nd anniversary with a backdrop of heavy music courtesy of local rockers Big Dawg, and Warner Bros. Recording artist Kevin McKay of the Warren Commission.

Chris Chrome
The only guy to find the Bikernet booth. We didn’t have great position.

Events like the Island Tattoo Contest, Sensually Yours Bikini Contest, and the ride in bike show kept the crowd entertained until the Big Schwag announced the winner of the BMC Rolling Chassis that was given away by BMC’s Big Mike & Hawaiian Chopper Editor-in-Chief Steve Kalnasy. Congratulations go out to Robert Williams of Ewa Beach who had the winning ticket and pushed away what will one day be one of Hawaiian Choppers featured chops. Thanks for the contribution Mike. I expect that that chassis will be something that BMC will be proud of…

models

I am just now beginning to get my sanity back after one fucking crazy weekend, and I want to take a moment and recognize some of those behind the scenes people who helped me create a one cool party.

BMC winner

My partner Wanda Shipp, Mike Caswell & Pasha Hawaii, Big Mike of BMC Choppers & his brother Jason Rouse, Todd, James & the boys at Budweiser, Mario Medri, Bill Van & the crew at Pacific Rim Cycle, Mark Eli, Dan Franco & everyone at South Seas Harley, Domenico’s Harley-Davidson, Cycle City, Mikey’s Speed Shop, Mobi Pacific, Ryan Lau & the Tattoo Krew, Bandit & Bikernet, Steve Hoppis & Nancy Carr, Big Fatt Tatts, my brother Kevin McKay, Sugar Bear, Shannon Aikau, Harold Pontarelli, Roger Kuwahara & the brothers at Kustom Fab, Nui Kauhane, Noah O’Geen, Bo Irvine, Ed Canoy, Big Schwag, Kapiolani Community College and a host of others I am sure I am forgetting (sorry bout that folks)…

2nd place tall

girl on bmc

Finally, I want to give some props to Deacon & Chris Tronolone for setting the stage for me. Without their hard work in the past, the Paradise Bikefest wouldn’t have been possible…

bikefest bikini winner 11

Now with that event under my belt, I hope you will all join us for the Great Hawaiian Biker Build-Off 2 being held Sunday, December 3rd following the annual Toys-for-Tots run. December in Hawaii! What could be better???

bike

Ahui ho,

–Steven Kalnasy
Editor-in-Chief
Hawaiian Chopper

expressive banner

Read More
Scroll to Top