August 22, 2005


BILL BISH ON LEGISLATION–HIGHBAR LAW CHANGE IN NEW YORK, HELMETS FOR CARS, HIGHWAY BILL FIXED AND CONFEDERATION OF CLUBS WORKING

billbish

THE AIM/NCOM MOTORCYCLE E-NEWS SERVICE is brought to you by Aid to InjuredMotorcyclists (A.I.M.) and the National Coalition of Motorcyclists (NCOM), andis sponsored by the Law Offices of Richard M. Lester. For more information, callus at 1-(800) ON-A-BIKE or visit us on our website at <>

NCOM NEWS BYTES 0805
Compiled & Edited by Bill Bish,
National Coalition of Motorcyclists

baker banner

HIGHWAY BILL FINALLY ENACTED: MOTORCYCLISTS’ CONCERNS ADDRESSED Following tendeadline extensions dating back to September 2003, the 109th Congress voted onJuly 29th to enact HR 3, the sweeping $286.4 billion highway bill thatreauthorizes federal transportation spending through September 2009, andPresident Bush signed the measure into public law on August 10th.

The final version of the massive 1,681-page document contains numerousmotorcycle provisions lobbied for over the past several years by national, stateand local motorcycle rights organizations and concerned individual riders.

In addition to providing much-needed federal funding to rejuvenate our nation’scrumbling infrastructure, the bill also makes available $25 million in grantmoney for motorcycle safety training and awareness programs to individualstates. The bill also provides for the formation of a motorcyclists advisorycouncil to advise the Federal Highway Administrator regarding how motorcyclesmust be included when designing future Intelligent Transportation systems.

HR 3 also includes nearly $3 million for a new scientific study of motorcyclecrashes to be conducted by the Oklahoma Transportation Center, located atOklahoma State University. This marks the first comprehensive research intomotorcycle crashes since the Hurt Report was completed in the late 1970s.The reauthorization measure also stipulates that motorcycles will continue to beallowed to use High-Occupancy Vehicle (HOV) lanes, and continues to prohibitlocal governments from excluding motorcycles on roads maintained with federalfunding.Lastly, for off-road riders, the legislation earmarks $370 million from gasolinetaxes to fund the Recreational Trails Program.

BDL

MOTORCYCLE FATALITIES CONTINUE TO CLIMB Motorcycle fatalities nationwide havesurged to their highest levels since 1987, even as overall highway deathscontinue to decline.

In 2004, 4,008 motorcycle riders were killed in highway accidents, up 7.9% from2003 and 89% higher than in 1997, according to a new National Highway TrafficSafety Administration report. Meanwhile, passenger car deaths dropped 3.2% to19,091 last year.

NHTSA cites as possible causes: a sharp rise in motorcycle ownership, anincrease in inexperienced bikers riding powerful machines, and rollback ofmandatory helmet laws in several states.

Americans bought an estimated 734,000 new on-highway motorcycles last year, upfrom 230,000 in 1995, according to the Motorcycle Safety Foundation.

Motorcycle groups opposed to helmet laws point to the changing face of bikers,reports USA Today. Jeff Rabe, lobbyist for the Modified Motorcycle Association(MMA) of California and member of the board of directors for the NationalCoalition of Motorcyclists (NCOM), said more “middle-aged executives” are ridingpowerful machines without training. “There’s a huge group of people ages 35 to50 who have purchased motorcycles,” Rabe said. “But they’re still beginning riders.”

ROADMAX BANNER

INVENTOR PROMOTES CAR HELMETS FOR KIDS Michael Fleming, an amateur inventor andfull-time Houston attorney, has filed a patent application for a new safetydevice for kids. It’s called the Automobile Helmet. “The time has come for ahelmet that protects children in autos,” Fleming told the Chicago Tribune.

Fleming cited government statistics that 2,500 children are killed and 294,000injured annually in vehicle accidents.

But how do parents convince their kids to not only belt up, but helmet up as well?

Fleming thinks he has the answer: loading the helmet with electronics. “Bybuilding a helmet that allows a child to listen to music, watch a DVD movie orplay a handheld game, I’m hoping they?ll want to wear a helmet without complaint.”

Samson

NEW YORK AMENDS HANDLEBAR HEIGHT LAW Governor George E. Pataki has signed intolaw a handlebar height bill that will allow motorcyclists to adjust the heightof their handlebars up to shoulder level, eliminating the 15″ above the seatstandard that has been the law since the late sixties.

sturgis MM

ONCE RIVALS, BIKE CLUBS NOW WORKING TOGETHER Once-notorious outlaw-bikerrivals, the Pagans and Warlocks are working together to raise funds to fightdiscrimination, fresh from helping to repeal laws regarding motorcycle helmetsand high handlebars, reports the Philadelphia Daily News.

What’s more, these clubs have joined with non-outlaw bikers to fight againstdiscrimination and police harassment in a political and legal forum, and threwtheir first annual Summer Sizzler, a biker family picnic, on August 21st, at theNevlin Grist Mill Park, in Glen Mills, Delaware County.This was the first major fund-raiser for the Confederation of Clubs of EasternPennsylvania, founded in April 1999. The confederation represents more than1,000 members, with an average age of 42, from 23 clubs. Members include 1percenters, Bikers Against Child Abuse, Christian bikers, and Clean and Soberbikers.It’s one of 55 confederations in North America, the fastest-growing part of thenational bikers- rights movement, with annual national conventions and a Website: www.aimncom.com/coc/.

The confederations’ aim is to stop police harassment of bikers and civil-rightsdiscrimination in housing, bars and other areas, and to solve mutual problems,not settle scores among clubs, according to its local president, a Warlock.

“We’re all bikers,” said Kenny Plank, of Longriders, in Chester County. “There’sno reason to be fighting each other.”

k and myron

Not all bikers in the local confederation are outlaws and not all outlaw bikersare gangsters. They are nurses, firemen, company owners, salesmen, judges andlawyers.

As confederation treasurer, “Patches” said his job was to “make sure all thecommittees are doing the right thing.” That is, keeping within a $5,000 partybudget. After paying for expenses, said Patches, a member of the MessengersMotorcycle Club, known as a “clean and sober” club, “We’ll have the legal meansto protect ourselves.”

“We’re serious about bikers rights,” he said. The confederation is “neutral ground.”

At regular meetings at which two representatives per club have one vote,Norristown attorney Boyd Spencer regularly updates them about state and federallegislation, including the Patriot Act. Spencer said the law “targets three ormore people with a common handshake, common purpose and common attire.”

Spencer is a member of the national network of biker-rights lawyers in Aid toInjured Motorcyclists, or AIM, founded in 1982 by California attorney Richard M.Lester, who started the national confederation and similar groups.

On legislative issues, the local confederation supports the Alliance of BikersAimed Toward Education (ABATE) of Pennsylvania, the main biker lobby; andPennsylvania Coalition of Motorcyclists (PCOM), which monitors legislation.

The confederation supported member Warlocks and the Bikers Against Child Abuse(BACA), both of whom sued police for allegedly harassing bikers in separate Toysfor Tots Runs in Philadelphia and Delaware County in 2002. The Warlocks obtaineda consent decree from the Philly cops and BACA, an out-of-court settlement fromDarby Borough.

“Everybody is getting along together as a group and becoming more political,”said “Rabbit,” of Men of Honor. “It’s good to see as many [clubs] agree on onething.”

At their latest confederation meeting, held in the middle of the summer whenmost organizations don’t meet, the confederation drew more than 40 members.

Amid the banter, the president introduced “Q” as a nurse and a minister: “He canbury ya and marry ya.”

For $200, which would go to the confederation, he added, bikers could getmarried or renew their vows at the Summer Sizzler.

“Boyd will do the divorce,” joked the president, referring to AIM lawyer BoydSpencer.

Later, Q identified himself as Steve Stoyke, 54, a member of Association ofRecovering Motorcyclists, or ARM, who rode five hours on his Harley fromFrederick, Md., to support the confederation. “To do a wedding, we line bikes upon either side,” said Stoyke. “You can do a traditional wedding, or we can readfrom the Harley Repair Manual.”

The minister asks the groom: “Do you promise to keep her cables greased andtires balanced?”

And he asks the bride: “Do you promise to keep his gas filter cleared, changehis oil and bring him in for maintenance?”

“This is America’s last subculture,” added Stoyke. “That’s what keeps ourcountry great.”

TEXAS NATIONAL BIKE SHOW POSTER

WEIRD NEWS: HARLEY HELPS BLIND TO SEE A student at Penn State Behrend Collegein Erie, PA has developed a process that may help the blind to “see” digitalphotographs. Using a process developed by Harley-Davidson called “rapidprototyping,” 27-year old Jason Donnell hopes to produce 3-D images that a blindperson could run their fingers across and “feel” the image, in much the samemanner as Braille is used to read.

“With a Word document, you output to a printer,” explains Donnell. “With rapidprototyping, the output is to a machine that uses a special type of paper, waxor plastic. So, for example, if Harley-Davidson has something they want toinclude on a bike, but is not too sure about, they can input the information andit will produce an exact size copy of the item.”

After a lot of hours writing and re-writing, Donnell has his program, but theresults so far have been mixed. Because of the short time frame of the collegeproject, he was only able to produce and test three examples.

“The test on a simple picture of a playing card were pretty good,” Donnell toldthe Valley News Dispatch, “but the pictures of a tree and a ghost town were verytough and showed the need for more work.”

Avon Banner

QUOTABLE QUOTES: “Politics is the art of looking for trouble, finding it whetherit exists or not, diagnosing it incorrectly, and applying the wrong remedy.”Sir Ernest Benn (1875-1954), publisher and public speaker

Bros Club

Custom Chrome Banner

AND THAT’S ALL THE NEWS THAT FITS!

Jims Banner

Please follow and like us:
Pin Share

August 18, 2005 Part 1

BIKERNET NEWS FLASH – STEALTH REPORT, ROADMAX IN THE NEWS AND TMC NEW MODELS

primary

tank

1 circuit brkr bar in place

Hey,

The buzz this week is Sturgis. I’ve been called on to write several articles for a new dealer mag called American Big Twin Dealer. You’ll see it lying around in shops all across the country. They want Sturgis reports.

We’ll begin posting wild Sturgis reports as of tomorrow with Johnny Humble and myself. Reports are flowing in from Glenn (Australian reporter), Crazy Horse and Rogue. We’ll have all the action, the rides out, the breakdowns, the love lost, and the new girls.

My bike is doused with 1600 miles of rain and needs work, but I’m torn between cleaning it and going to work or shooting if for a mag feature while it still looks 50 years old and worn. Whatta ya tink?

So what’s ahead? Good question, the answer includes Las Vegas Bike Week, the Saxon Motorcycles 2006 model launch in Mexico, the Lone Star Rally in Texas and a vintage car race across Mexico. Seems I’ll be in the desert through out September. Oh and there’s a bike Show in Paso Robles.

Let’s hit the news and I’ll tell you about the party this weekend.

lucky devil blue chop

LUCKY DEVIL MOTOR CLOSE

THE DEVILS? BEEN BUSY–One of Kent?s latest project.


Click to see morefrom Lucky Devil

billrucker1

Metzeler Selects Rucker Performance for Collectors Poster–Fort Worth, Texas (August 5, 2005) – The 2005 Rucker Performance Assassin, a formidable American Muscle Bike, debuts as part of the 2005 Metzeler Collectors Poster series. Featured with high performance radial tires, the Assassin will be showcased and distributed on posters at Metzeler’s Sturgis V-Twin Bike Contest.”We are honored to be recognized by Metzeler and asked to participate in the Collectors Poster program,” said Bill Rucker, President of Rucker Performance. “The Metzeler technology provides stability, maneuverability and reliability – all factors that are keys to the success of our motorcycles.”

In today’s custom V-Twin market form and function must work together to provide the customer the right look with comfort and safety. The ME 880 series tires do just that.

“In order for the super clean Assassin to have the right look the rear tire and fender need to be as close as possible,” said Chris Wall, Metzeler’s Marketing Manager. “Other tire manufacturers’ tires have a tendency to give in to centrifugal growth and actually rub on the fender and damage paint. Metzeler’s ME 880 tires grow only 2 mm at 160 mph in testing due to our patented zero degree steel belt technology.”

Buyers of Rucker Performance motorcycles can select from more than 16 Weld Racing wheels to fit with Metzeler rubber. The full selection of Weld wheels includes the new Master Builders series designed by five of the country’s top custom bike builders like Eddie Trotta of Thunder Cycle Designs, Kendall Johnson of Kendall Johnson Customs, Matt Hotch of HotMatch Custom Cycles, Kim Suter of K.C. Creations and Vince Doll of Redneck Engineering.

“NHRA World Champions John Force and Kenny Bernstein win on Weld Racing wheels,” said Bill Rucker. “Their manufacturing technology gives us a lighter wheel than other wheels in the marketplace. This provides us with reduced unsprung weight and better handling when utilizing the Metzeler rubber.”

ContactsFor dealership inquires, contact Bill Rucker at (817) 838-

TMCC BANNER

FIRST ANNUAL Thunder Mountain DEALER MEETING – RECAP 2005

Thunder Mountain Custom Cycles (TMCC) held its first annual dealer meeting Friday July 22nd which was a great success not only for our dealers but also for Thunder Mountain Custom Cycles. We would like to thank the 60 plus dealers that made the trip out to see us at our home base in Loveland, Colorado! We are proud to announce that our very own Blackhawk 240’s have launched TMCC into the top 5 custom bike builders in the world, which was done with no external marketing outside of our dealerships. TMCC now has a full time marketing director dedicated to launching a national marketing campaign over the next quarter that will bring custom bike enthusiasts into our dealer network to find their perfect custom.

2006 New Model Line Up

TMC BOBBER

Sterling: This back-to-the-basics bobber comes equipped with an H-D Twin Cam 88 motor and 40 spoke chrome wheels. Simple and smooth. The old-school model comes in either gloss black or matte black and soars on a 21″ front wheel and a 18″/180 mm rear wheel, made up of over 90% H-D components. Not available for sale in California.

Sterling RM: An upgraded version of the simply sleek Sterling, the Sterling RM includes six retro style custom paint options. Other options include a black or chrome springer front end, Carburated or H-D/Delphi EFI as well as your choice of black or chrome 60 spoke wheels. This retro model is shoehorned with a smooth and powerful H-D Screamin’ Eagle 103 B engine that will take you where no bobber has gone before.

TMC RED BIKE

Keystone: At 9’2″ long, the 300 mm rear tire custom is ready to hit the road. Using Jim’s right side drive and an H-D hydraulic clutch, this eye-catching TMC Cycle is all about balanced ride ability and ease.

TMC FRONTIER

Frontier: For miles of endless road, the only production 240 soft tail bagger includes the new 2006 H-D /Harmon Kardon factory stereo. The Frontier comes stock with over 90% H-D components including the Screamin’ Eagle 6-Speed Transmission, Twin Cam 103 B engine, and the H-D /Delphi EFI.

For immediate viewing of our newest line of customs, check out our website at http://www.TMCcycles.com.

TWO National Blackhawk 240 GiveawaysTMCC’s national marketing campaign is dedicated to increasing dealer market share as well as generating consumer excitement. TWO national giveaways have been put into place for TMCC’s network of dealers, the ‘TMC National Tour: Featuring the Blackhawk 240’ and the ‘Top Gun’ giveaway.

‘TMC National Tour: Featuring the Blackhawk 240’ is an enter-to-win Blackhawk 240 that will be kicked off September 1, 2005 for public entry. That giveaway bike will be traveling to TMCC dealerships across the country based on availability.

‘Top Gun’ is our second national bike giveaway! This Blackhawk 240 will be awarded to the number one salesperson of TMCC models at next year’s dealer meeting in San Diego, 2006. Sign up your salespeople and start selling!

YOUNG BANNER

HANK YOUNG RUNS ROADMAX–Young Choppers & Hot Rods, Inc. Builds With Roadmax TrannysHank Young, President of Young Choppers & Hot Rods, Inc. builds custom motorcycle projects in any stage, from ground up customizations to specialized adaptations and fitments. For his latest motorcycle project Young picked a Roadmax transmission to debut on his latest creation.

ROADMAX HANK YOUNG

“I’m using a Roadmax right side drive supplied by Bob Kay of Biker Pros for a project that Micheal Lichter is putting together at the Journey Museum, It will coincide with the 2005 Black Hills Motorcycle Rally in Sturgis,” said Young. “This motorcycle has a similar look to the Bonneville Salt Flats racers of yesterday.”

mike lichter

Micheal Lichter, a world renowned motorcycle photographer, is creating an exhibition that is called Speed Demon. Lichter has collected a group of race-inspired motorcycles for the showcase.

The Bonneville project features a 120CI Harmon Motor manufactured by John Harmon in the 1980’s.

This motor is a prototype based on a shovel-head design with dual carburetors.The style of the bike will be long and low with an aerodynamic design.

“We are excited to be a part of this project with Hank Young,” stated Bob Kay, President, Biker Pros. “Hank (Young) is so enthusiastic about the Roadmax products that he is building two other custom motorcycles with Roadmax transmissions concurrently with his Bonneville project.”

Stopping in at American Performance Cycle (APC) requires you to pass the gauntlet of businesses from the who’s who of American racing including:Mario AndrettiCarroll ShelbyFreddie SpencerDerek DailyKing Richard Petty–You see Mike Sample, President of American Performance Cycle, and his crew at APC office at the performance warehouses next to the Las Vegas Motor Speedway. On any given day you can smell race-fuel and hear the high-performance engines screaming around the track.

Given their location, it’s not a coincidence that APC builds high-performance choppers and cruisers. Mike Sample makes sure that he builds a quality product.

“We use quality products where fit, finish and performance are important,” said Sample. “At APC we use Roadmax transmissions because it is a good product that shifts nice and works well. We use the 6-speed Roadmax in all of our high-performance right-side drive models.”

Seven Models APC offers seven models including High Roller S, 240, 280, Wild Card 240, 280, Hustler 240 and the Spirit S. APC offers softail-style suspension on there chopper and cruiser lines. Since fabrication and painting is handled in-house, customers can order custom one-of-a-kind paint schemes, stretch, rake, accessories, wheels and controls.

highroller

hustler

Running Roadmax “We are excited to have American Performance Cycles as part of the Roadmax family,” explained Bob Kay, President of Biker Pros. “Mike Sample is building outstanding bikes as well as a company that has staying power.”

Business is heating up at APC since the beginning of the year. Since January dealership outlets have grown from 42 to 52. APC has also brought in General Electric to handle flooring for dealers. Later this year APC will clear CARB emissions with bikes being available in California.

High Performance “My background is equal parts businessman and motorhead,” explains Sample. “I’ve raced and wrenched off-shore boats and before APC I was the second top producing stockbroker in the firm. This provides me with the experience to build a firm that will be here tomorrow with a product that is outstanding in design and just about bulletproof in durability.”

Currently APC’s facility includes a “cell” production facility for the custom high-end manufacturing and an assembly line operation for its new entry-level motorcycle the “Spirit S”. In addition, this expanded facility includes a state of the art “Machine Shop” with CNC capabilities thus allowing APC to build many more of the parts it requires, while lowering cost.

guy on full dresser

AS A LONG TIME MEMBER OF BANDIT’S CANTINA– and a big chunk of my life a KR Ball fan, Thought I would drop you a line and let all of you there at Bikernet that I have decided to leave my home of 50 years and move to Arkansas. Selling my little house in Whittier ( that I couldn’t afford to buy) and building a big house on my 5 acres in Montgomery county .

I have listed one of my toys on your site ( 03 ultra classic gun metal blue with an inline trailer ) If you know of anyone looking for one please send them my way. I hope before I leave I can get over to Wilmington and check out the Cantina ( If I can find it ). The good thing in all of this is I will be able to ride my Softtail a lot more and go to more happenings and Abate rallies. Hope someday to meet you in person.

John (corky) Boaz
Used to stand em up and knock em pretty good when I was younger.
( I think! can’t remember )

STEALTH BIKEWORKS BANNER

STEALTH BIKE WORKS WEEKLY REPORT–There has not been a lot to talk about lately. Here at STEALTH BIKE WORKS, we now have a website, http://www.stealthbikeworks.com.! Check it out, it is still in the early stages but it is coming along.

stealth front tank

stealth rear tank

We sold our first in-house hand made part this week. A diamond gas tank by Chopper John. We are working on another tank and it should be ready soon. If any of you out there need a tank or any metal work done give us a call at 704-882-0889. Chopper John also has an oil tank in the works.

You know owning your own shop opens your eyes to a lot of things you never saw before. People come in and want you to compete with e-bay prices and you cannot. Something to think about, when you buy a part on e-bay, do you get a warranty with the part? I don’t think so. I get to talk to a lot of shop owners in the area and it seems we all have the same problems. One of those problems is customers bringing in their own parts off e-bay and having us install them. Let me ask you a question. Would you go to your local grocery store and buy hamburger and then take it to Burger King and ask them to prepare it? I don’t think so! The point here is that your local shop is there foryou when you have a question concerning your bike or parts. The people on e-bay are not.

When you ask your local shop questions consider this, How long did it take those guys to gain the experience needed to answer the questions? Your local shop doesn’t charge you a dime to share their knowledge. Consider also the little things that shop does for you after the store closes. A lot of us have our cell numbers listed on their business cards in case of an emergency or breakdown, again they don’t charge you for this service. My point to all of this is Support Your Local Aftermarket Shop! Stop for a minute and think what it would be like without these shops. Yeah it would not be much fun , would it? The only place you would have to go is you local dealer and we all know they are looking out for you. Right! Or there will always be e-bay, except they don’t service bikes, they don’t customize bikes and they don’t chop bikes.

So the next time you need something for your bike, take a minute and think about your local aftermarket shop. The guy running that shop is just like you, trying to make a living and trying to do what he loves. Contrary to popular belief we are not all rich because we own our shops. Just a little something to think about.

With that being said, go out and ride to your local shop, they will be glad to see you and you will be glad you did!

Until next time, RIDE!
STEALTHMAN

Continued On Page 2

Please follow and like us:
Pin Share