Motorcycle Sound Working Group Narrative


MRFa

ISSUE STATEMENT

The issue of motorcycle sound has been recently described as an issue that we, the motorcycle community, must address or it will address us.

Dr. Muffler
Dr. Muffler, official consultant to the MRF.

WHERE WE ARE

Motorcycle sound when deemed excessive has become a serious issue in some communities and certainly may become an issue in many more. Most troubling is that the potential exists for this to affect motorcycle rights nationwide.

At this point the sound issue is being dealt with inconsistently both by the communities and the riders themselves. In the communities we are seeing a vast range of little or no concern at all, to ordinances being put in place of varying degrees from reasonable sound level limits being set clear up to harassment and outright bans. Testing is being carried out and enforced against that is not consistent with developed methodology. And we have seen unenforceable regulations on the rise in an effort to curb excessive sound. The EPA has even been called on to address the sound issue through regulations under their jurisdiction. It is easily identified that motorcycle sound can become a serious enough issue where punitive, discriminatory, and even anti-tampering measures are being suggested and often times acted upon against motorcyclists.

In the rider community we also run an equally wide gap from the “Loud pipes risk rights” crowd to the “Loud pipes save lives” crowd, both equally passionate about the sound their motorcycles make and the ability to make the desired sound. There is certainly an image that has been romanticized and capitalized upon when it comes to sound and that must be recognized. Along with that comes the desire for added performance, real or perceived, there is a strong connection of sound equals power at work here. Of greatest concern though is that amongst ourselves the issue leads to finger pointing, assigning blame or singling out specific groups, prohibiting motorcycles from motorcycle events, and may even lead to galvanizing one crowd against the other. This alone is enough to set the motorcycle rights community and their efforts back significantly.

onbike
Very dangerous, on the road testing procedure.

WHERE WE WANT TO BE

In the big picture ideally we strive for mainstream society to accept motorcycles and view them as positive. We certainly want to increase accessibility to motorcycles and maintain riding areas for potential new riders and veteran riders alike. Without question we desire a well-educated public and one that can influence and educate future users. We need the various National and State motorcycle rights organizations to work together on this issues as well as continue coalition building with other affected motorcycle users of all types. We certainly want to avoid global standards, community driven standards, and government control. Instead we should want to see rider responsibility, social marketing, and peer pressure as methods to help solve the issue where the motto “Educate not Legislate” remains a driving force.

HOW TO GET THERE

Many believe that this is not really a motorcycle issue but may be more of a behavioral issue and that must be addressed through more education. We need to get additional motorcycle elements invested in the process of recognizing sound as an issue. We need to educate motorcyclists and the public what sound is. Along with that we must also insure appropriate, consistent, affordable, and repeatable testing if it is to be used as a measurement tool. Very important is the fact that we must illustrate as the motorcycle stakeholders involved that nothing was taken off the table and that all concerns and avenues to address those concerns were discussed in an open environment. We also need much greater cooperation between riders and the public.

noisekid
Nazi noise testing youth–scary.

SPECIFIC RECOMMENDATIONS

Publish an explanatory document illustrating the many subjects related to the sound issue the Sound Working Group considered.

Publish a technical document explaining the mechanics of sound and sound measurement, as well as identifying the current standards in place and their sound measurement techniques.

Critical we get the motorcycle media, the motorcycle racing community, and manufacturers from the O.E.M. side and the aftermarket side to become fully recognizant and invested in this issue.

Manufacturers need to be aware of cost implications and availability of various parts affecting sound.

The racing community needs to enforce rules in place, the concern here is that the general riding population will purchase whatever the professionals use on their motorcycles and in many cases they exceed the racing standards in place.

Form a strong coalition with the off-road motorcycle community, as many of the issues we face are the same. The On-road group can certainly learn from the Off-road group.

Further investigate the issue of sound and its negativity. Specifically research what leads to the actual complaint from the public such as time of day, duration of excessive sound, tone, decibel level, and was it tied to another event.

Conduct a scientific study into whether or not sound has an impact on the safety of the motorcyclist and/or increases awareness of another driver as to the presence of a motorcycle, and if so in what circumstances.

Develop and promote voluntary sound measurement exercises by motorcyclists in order to educate riders on their sound levels.

Develop a program that can be used to educate the public on this issue.

Need to investigate whether or not the current and proposed EPA regulations are too strict and forcing the sound issue.

Get State Motorcycle Rights Organizations to agree that educating their members can have an impact if the proper tool is used.

A concerted effort should be made by motorcycle dealers and aftermarket shops to define a usable power band for the user. This campaign would best be developed by an industry association for promotion amongst their members.

HIGH PRIORITY

Develop a social awareness campaign (peer pressure) in a usable format to educate riders regarding the affect motorcycle sound can have in many riding areas and then get the manufacturers, rights groups, and marketing groups to promote and distribute it.

Respectfully submitted to the Sound Working Group,

–Kirk “Hardtail” Willard
Vice President
Motorcycle Riders Foundation

Bikernet noise study banner
For suggestions from the Bikernet Independent Noise Study, touch on the mudflap girls.

Please follow and like us:
Pin Share

November 13, 2008 Part 1

BIKERNET ECONOMIC NEWS, TRYING TO HELP WITH THREE BIKE GIVE-AWAYS, WIN DRESSER EXHAUSTS AND TERRIFIC DEALS, WHAT MORE COULD YOU ASK FOR?

Leadshot

Hey,

Strange times with the sour economy and talks of bailing out one company after another. Isn’t it the code of the west that if your company sucks, you go out of business or get your shit together? It blows my mind. These people run reports constantly. Guess the big dogs were too busy playing golf to read ’em.

Fuck, there’s only one real excuse for fuck-ups like this: Big titted redheads that drive you half outta your mind. Gotta give a guy some slack under those circumstances, but how many big-titted, sex maniac redheads can there be?

We’re Americans, the innovative gods, we’ll straighten this mess out and party again. Let’s hit the news:

Oldracersandbabe

LAS VEGAS BIKEFEST TAKES OVER SIN CITY–Thousands of Bikers from All Over the World Flock to Las Vegas for BikeFest.

LAS VEGAS (November 3, 2008) ?When the eighth annual Las Vegas BikeFest cruised into downtown Las Vegas October 2-5, 2008, more than 30,000 motorcycle enthusiasts from all over the world enjoyed four days of all things related to the exciting world of custom motorcycles. Approximately 300 vendors showcased the latest in parts, accessories and apparel, but the highlight of the event was the Artistry in Iron competition where custom builders compete for the coveted title of Master Builder in an exciting biker build-off competition.

Artistry in Iron, the peer-judged, invitation-only custom bike building competition featured some of the most innovative custom bike building BikeFest has seen yet. With 20 builders gathering from all corners of the U.S. and Canada, the competition was steeper than it has ever been. As expected, the bike builders rose to the challenge, creating some of the most unique and creative bikes seen yet. Roger Goldammer of Goldammer Cycle Works Ltd. in British Columbia took home the top prize. Along with winning $20,000, Goldammer took home the respect of his peers who voted his bike into the winners circle, beating out 19 hand-picked bike builders, including Kris Krome, Kirk Taylor, Jim Nasi and Satya Kraus, among others.

Watch for all the sordid details, winners’ list and nasty shots on Bikernet.com next week.

For more information, visit
www.LasVegasBikeFest.com, call toll-free 866-BIKEFEST (245-3337), or email info@lasvegasbikefest.com.

Las Vegas Bike Fest Banner

SPEAKING OF SEX– Bill worked in a pickle factory. He had been employed there for a number of years when he came home oneday to confess to his wife that he had a terrible compulsion.

He had an urge to stick his penis into the pickle slicer.

His wife suggested that he should see a sex therapist to talk about it,but Bill said he would be too embarrassed. He vowed to overcome thecompulsion on his own.

One day a few weeks later, Bill came home and his wife could see at oncethat something was seriously wrong.

‘What’s wrong, Bill?’ she asked.

‘Do you remember that I told you how I had this tremendous urge to putmy penis into the pickle slicer?’

‘Oh, Bill, you didn’t’ she exclaimed.

‘Yes, I did.’ he replied.

‘My God, Bill, what happened?’

‘I got fired.’

‘No, Bill I mean, what happened with the pickle slicer?’

‘Oh…she got fired too.’

95760-57---Rocker-bushing-p

JIMS BIKERNET TOOL OF THE WEEK–Rocker Arm Bushing InstallerRocker rebuilding in half the time. Use to install rocker arm bushings inrocker arms with or without a press. This tool will install each bushing tothe correct depth for the best oil control.

Use JIMS tool No.95760-57 forremoving bushings, and ream to size with JIMS tool No.94804-57 reamer.

2357-TOOL-ACTION

No.2357 – Use on all Big Twin 1966-present, and Twin Cam. (Note: Includesall aftermarket rocker arms.)Use on Sportster 1957-present. Use on Buell1987-present.

JIMS Roller Rockers come with bushings already installed andfit to factory size.

Suggested Retail Price $104.90

New Jims banner

BIKERNET RESEARCHING AN EFFORT TO ESTABLISH MOTORCYCLE COUNCIL IN SEMA–Iwas just reading the Sunday post and saw your comments about starting a motorcycle council within SEMA. That’s actually an idea I’ve had for a long time but never really moved ahead with it.

Growing up a car hot rodder I’ve always felt there is a very similar mind set between the two cultures and think we would benefit from trying to find common goals to deal with what we all know is impending legislation to either greatly restrict or eventually do away with both cultures.

I’d be interested in being involved with this new idea if you’re looking for others to join in.

Joe Cree
California Customs
2081-U Bering Dr.
San Jose, CA 95131
408-954-8972
www.calcustom.com

Dealer Direct

D&D WEEKLY DEALER DIRECT UPDATE–Here are the new dealers from last week

1) Extreme Cycles 3420 N Expressway Griffin, GA 30223 770-233-1188
2) Secret Eng 2588 Petworth Cincinnati, OH 45215 513-560-9208
3) Alternative Bike Werks 1523 Kell Ln # 7 Griffin, GA 30224 770-228-7739
4) Barnett’s Las Cruces H-D/Buell 2600 Lakeside Dr Las Cruces, NM 88005 575-541-1440

–Jennifer

girls
Click here to enter Bikernet free contest area and receive Bikernet Updates.

NEWS FLASH, BANDIT TO JUDGE THE GRAND NATIONAL HOT ROD SHOW IN JANUARY–It’s the absolute granddaddy of custom car, hot rod, lead sleds and motorcycle show. It’s located at the Pomona fair grounds and I’m not sure the dates. As more info filters in I’ll pass it on.

VTwinExpo Logo

JIM BETLACH’S CINCY TRADE SHOW ADVERTISING IN AMERICAN MOTORCYCLE DEALER– Begin planning now for the 2009 AMD V-Twin Expo Preview and Show issuesWHILE the 2009 V-Twin Expo may seem like a few months away, in publishing terms, it’s only just around the corner.

As we have for every V-Twin Expo, AMD magazine will use the January issue as the show preview and the February issue as the “in hand” show edition with distribution at the expo.

Each issue will focus on the trade show itself and those companies and products that dealers will see while in Cincinnati.

AMDcover

Now is the time to send us your advertising and editorial message for the show.

January AMD – Advertising and Editorial Deadline = December 5th
February AMD – Advertising and Editorial Deadline = January 9th

Don’t wait, reserve your space now for one of the most important events on the v-twin calendar and your ticket to success in 2009.

Questions- Please contact:Chris McGee at chris@dealer-world.com or 310-698-0830
Brian Marion at brian@dealer-world.com or 336-760-8307
Mary Beth Crowe at marybeth@dealer-world.com or 605-716-6486

JP BOOK 3D

J&P 30th ANNIVERSARY BOOK AVAILABLE–ANAMOSA, Iowa – J&P Cycles is proud to announce a special item that is now available to commemorate their 30th Anniversary. The item is a book titled, Keeping The World on 2 Wheels, How J&P Cycles Changed the American Motorcycle Industry.

Written by Ed Youngblood, the book features a foreword by Arlen Ness. Ed has been active in the world of motorcycling for 50 years as president of the American Motorcyclist Association, the International Motorcycle Federation and the historical motorcycle information company Motohistory. Ed is now a member of the Motorcycle Hall of Fame and has authored six motorcycle related books.

The history of J&P Cycles is highlighted in the book, John and Jill Parham?s life together as well as how they endured the ups and downs, never giving up to make their dreams come true and how J&P changed the American Motorcycle industry.

This full color book includes hundreds of photos, a section devoted to John?s personal motorcycle collection and a bonus DVD tour of the Parham?s other motorcycle passion, the National Motorcycle Museum.

J&P logo

Think you know everything about J&P? Chances are you don?t and this book will be a great collector?s item. A limited number of copies of the book are available to the public, so be sure to order your copy today!?Go online to WWW.JPCYCLES.COM or call toll-free 800-397-4844 to order your copy now. The book retails for only $24.99.

Order toll-free in the U.S. and Canada at 1-800-397-4844 or online at WWW.JPCYCLES.COM.

rollin tshirts 1

THE BIKERNET/ROLLIN’ SIXES SOLDIERS’ CHRISTMAS T-SHIRT DRIVE HAS A NEW INDUSTRY SPONSOR, BIKERS CHOICE–Biker’s Choice has offered to help with the postage for shipping T-shirts to servicemen and women overseas.

“I have spent my weekend calculating and verifying my numbers of Shirts and how many packages and so forth,” said Jerry Bias, the boss of Rollin’ Sixes Choppers and Rods. “I have outlined the shipping requirements and some of our thoughts on shipping them. We are also projecting to have around 1,200 shirts.”

rollin tshirts 2

We are still collecting shirts till Nov. 22 and you can send them to:

T-shirts for Troops
2164 West First Street
Suite A
Fort Myers, FL 33901

BIKERS CHOICE BANNER

Thanks to everyone in the industry who have helped support our effort.

RollinSixesbanner

Continued On Page 2

Please follow and like us:
Pin Share