Hey,
I attended a Wilmington, California Neighborhood Council meeting last night. At each meeting a cop gets up and gives a very succinct report on crime in the neighborhood. This time there were two police agencies represented. You’ll get a kick out of this. Local cops are targeting bikers. I immediately started fidgeting in my seat.
Then I found out their targets were bicyclists. They pull them over often and run their info for illegals, warrants, parole offenders, probation issues, and search them for drugs. I’m glad I ride a chopper.
I mentioned this before, but if a serious crime takes place locally here’s a list of the responding agencies: LAPD, Harbor Police, Immigration, Sheriffs department, Boarder patrol, FBI, CIA, Coroner’s office, and I’m probably missing a couple. Watch your back.
Let’s hit the news:
The news is sponsored by Cycle Source and Easyriders Magazines
TC BROS. 5-INCH WIDE RAW STEEL RIBBED BOBBER FENDER–High quality, one piece 14ga stamped steel construction for high strength. This fender radius fits great with tall side wall vintage style 16-inch rear tires (see SKU #115-0002, #115-0003, #115-0004 for tires) as well as 18 and 19-inch rear tires.
Fender is 5 inches Wide, 28 ¾ inches from tip to tip, and just under 13 inches tall overall. The timeless, classic look of these fenders are very similar to Wassell style British fenders produced back in the 1960s, except these are brand new, and thicker material for increased strength!
Item: #105-0131
Retail: $149.99
Both items are available for purchase on TC Bros. website: www.TCBros.com or call 419-265-9399
–Tim Cobb
TC Bros. Choppers, LLC
Cell: 419-654-8747
tim@tcbroschoppers.com
Fax: 866-652-3989
www.tcbroschoppers.com
THIS JUST IN, New Bikernet Reader Comment!– INSTALLING PROGRESSIVE SUSPENSION TOURING SPRINGS
http://www.bikernet.com/pages/story_detail.aspx?id=11103
Hi wanting to know how much fork oil goes in the 1-inch lowering spring kit for my 2010 Street glide?
— Greg Gehrig
greg7927@yahoo.com
Clarington, OH
We recommend using factory oil volume.
–David Zemla
Director of Sales & Marketing
Progressive Suspension
dzemla@progressivesuspension.com
http://www.progressivesuspension.com
FAMOUS TROCK CYLINDERS RETURN–Ron Trocks son Ron is bringing back the legendary Trock cylinders.
This includes Twin cam, Evo Big Twin & Sportster, Shovelhead, Panhead, Knucklehead, Ironhead Sportster Shovester, Knuckster, Panster, etc.
Ron is ready to ramp up production for these classic cylinders.
He can be reached at rrtrock@aol.com
Ph # 1-847-683-4010
–Pablo
THE ALL NEW BIKERNET TAX FOUNDATION ALERT, The Taxman Cometh— The Internal Revenue Service (IRS) has issued a proposed rule that would affect the Motorcycle Riders Foundation (MRF) and every other advocacy group with the same tax status. The MRF has what is known as 501(C) 4 tax status, this means the MRF can be involved in political activities, however donations to the MRF are not tax deductible for the person or group that donates the money.
Recently the IRS seems to be unfairly targeting conservative tea party type groups. Now its time to punish everyone because the current IRS does not care for the way that some of these groups have been successful in getting out the vote and raising money. 501(c) 4’s are named after the section of U.S. code that defines them. Some of the tea party type groups are also in the (c) 4 grouping, as a “social welfare” group.
The 501(c) 4 is the segment of the nonprofit world best known for organizations like Karl Rove’s Crossroads GPS and the liberal group, Priorities USA. 501(c) 4’s are in fact made up of over 86,000 mostly small organizations nationwide, some of which are almost certainly active participants in our own community’s civic life. They weren’t invented in the last election cycle; they’ve been around for generations. Their purpose isn’t to hide donors; it’s to advance policies. The big famous guys and the shady newcomers get all the attention, but they aren’t typical of the sector, any more than Justin Bieber reflect the experience of the bulk of the people making a living in the music industry. It is true that political spending has skyrocketed since 2008 in the (c) 4 category and that some reform to those groups spending astronomical amounts of money for election purposes is warranted.
This tax status allows the MRF to “be involved in the political process” so long as the primary purpose of the organization is not partisan politics. Under the proposed rules we would be limited to doing work around elections and key votes. The IRS said in a hearing this past Wednesday that they have received an “unprecedented” number of comments and that the “rules would not be finalized anytime soon”.
At this point it is not clear whether the government planned to change the rules for all 501(c) groups, including (c)(5)’s (labor unions) and (c)(6)’s (trade associations). .
The new rule would limit what political activities the MRF and other (c) 4’s could do before election dates. What would be considered a “political activity” is not known. It could be as simple as a meeting with an elected official on an issue important to their constituents, a get out the vote effort or even endorsement of candidates.
By confusing protected political speech with electioneering, this proposed rule would silence social welfare non-profit organizations for a minimum of 90-days during an election year. However, because the regulation applies to elections at every level of government, and some state and local governments host elections on odd years, or in differing months of the year, free speech for (c) 4 organizations conceivably could be restricted every year.
This is unacceptable and out of line with our form of government. (c) 4 social welfare non-profit organizations serve a valuable role in society and it would be unjust to prohibit their speech. A final ruling could be years away.
The MRF will keep you updated on this issue.
BIKERNET SUNDAY SCHOOL LESSON–The Pastor’s Ass.
The Pastor entered his donkey in a race and
it won !!
The Pastor was so pleased with the donkey
that he entered it in the next race,
and it won that race too.
The local paper read:
PASTOR’S
ASS OUT FRONT.
The Bishop was so upset with this kind of
Publicity that he ordered the
Pastor not to enter the donkey in another races.
The next day the local paper headline read:
“BISHOP
SCRATCHES
PASTOR’S
ASS”.
This was too much for the Bishop, so he
ordered the Pastor to get
rid of the donkey.
The Pastor decided to give it to a Nun in a
nearby convent.
The local paper, hearing of the news, posted
the following headline the next day:
NUN HAS BEST ASS IN TOWN!!
The Bishop fainted ….
He informed the Nun that she would have to
get rid of the donkey as soon as possible.
So she sold it to a local farmer for $10.
The next day the paper read:
“NUN
SELLS ASS FOR $10″.
This was too much for the Bishop so he
ordered the Nun to buy back the
donkey, and take it to the plains
where it could run wild.
The next day the headlines read:
NUN ANNOUNCES HER ASS IS WILD AND FREE.
The Bishop was buried the next day.
The moral of the story is .. . . being
concerned about public opinion can
bring you much grief and misery,
even shorten your life.
So be yourself and enjoy life.
Stop worrying about everyone else’s ass and
you’ll be a lot happier and live longer!
–Rev. Bob Clark
RIDE WRIGHT WHEELS Announces New 2014 Wheel Applications– Ride Wright Wheels, announced that they have all applications available for 2014 Harley models as well as Victory, Indian and Yamaha’s Star. Ride Wright Wheels is the premier “go to place” for getting American-made custom spoke or wire motorcycle wheels and now billet mag wheels just how you want them.
Exotica Wheels and Omega Wheels can be designed exactly the way the customer wants his wheels…there are no limitations! Choose the color of your new modular hubs, the styles and number of spokes, the spoke and rim finish as well as the color of nipples. Ride Wright Wheels has endless possibilities with style and fitment and their tremendous sales department helps customers design the ultimate personalized wheel. There’s nothing that can’t be done when designing your own rims including elaborate engraving if needed.
Exotica Wheels feature a rolled spun rim made from 6061-T6 aircraft aluminum and are enhanced with a special silicon material to handle added abrasion and flex for maximum durability. This smooth material prevents unsightly air-leaking imperfections as well. It also welcomes engraving and contrast designs on the edge of the wheel, which is another Ride Wright Wheel service offered. Available in 40, 50, 60 and 80 spoke designs in all popular sizes up to 26″ and soon to be released…30″ wheel.
Omega Wheels are exceptional “classic style lip” steel wheels built to suit the most discriminating tastes. Available in 40, 50, 60, 80 and 120 spokes with a variety of spoke styles, including twisted, diamond, smooth and jewel. Choose from hundreds of options just like our Omega line…the only difference is the style of the lip as well as the material used is steel instead of aluminum. The exception is our new 30″ Omega which has a 6061-T6 aluminum hoop and only weighs 9 lbs., making it the lightest wheel on the market in this size.
Our El Camino Wheels are manufactured to the highest standards utilizing aircraft quality 6061 T-6 aluminum. Strong, beautiful, balanced and complete with a full lifetime structural Ride Wright backing, these forged billet wheels are available in polished, chrome or painted to your liking…or can be “personalized” in a highly customized fashion to work with your ride.
Ride Wright Wheels offers matching rotors and pulleys and can be ordered with a set of your favorite tires computer balanced and mounted. To order a set of wheels, please call 714-632-8297, email them at sales@ridewrightwheels.com, Sam@ridewrightwheels.com or Jad@ridewrightwheels.com.
To see the latest from Ride Wright Wheels, visit www.ridewrightwheels.com.
SPORTSTER FIND OF THE WEEK–Bandit, I’m sending you a picture of my friends bike he just completed. Hopefully, you can do something for him!
–Larry St. Marie
Larry is an old high school buddy of mine. This Sportster is exceptional and Markus reached out to the editor of American Iron, Chris Maida who would like to consider it. We will let you know which mag offers to feature this classic. I will go see the bike in person next week. The builder built cars with Gene Winfield back in the day. –Bandit
AT LAST AN EXPANDED DEALER REPORT FROM D&D EXHAUST–Here are some of our newest D & D dealers. I’m sorry that I run behind on this report. We are so busy around the shop (which is great for business).
1) Mike’s Cycle Shop Inc 1448 East Lake Rd McDonough, GA 30252 770-954-1598
2) RRP Cycle Stuff 2546 St. Rt 57 Stewartsville, NJ 08886 908-454-8800
3) Hannum’s Harley Davidson 1241 Baltimore Pike Chaddsford, PA 19317 610-558-3331
4) Hammer Performance 1424 N. Boyer # C106-14 Sandpoint, ID 83864 208-696-1250
5) Flying Eagle Cycle, LLC W4304 State Road 67 Campbellsport, WI 53010 920-533-5595
6) The Toy Box 2004 Cutoff Rd Weston, WI 54476 715-359-8089
7) Road Rage Gear 704 Kirkwood Hwy Wilmington, DE 19805 302-225-5937
8) Maxwell Bros. Cycle Shop 2469 US 31N. Petoskey, MI 49770 231-347-2629
9) Cycle Pro/Harley Only 1 Morningstar Rd. Staten Island, NY 10303 718-818-0155
10) JP Stroker Inc 2-6-11 Kanonhonmachi, Nishi-Ku, Hiroshima, Japan 733-0033 81-82-532-8010
11) American Adrenaline, Inc 129 Labrador Dr # 4 Randleman, NC 27317 336-500-8903
12) Thunder Bird Harley Davidson 5000 Alameda Blvd Albuquerque, NM 87113 505-856-1000
13) Destination Cycles Inc 73 Eastlake Cr NE, Airdrie, AB, Canada T4A2H4 403-948-6940
14) Viking Land Harley Davidson 15808 Edgewood Dr Baxter, MN 56425 218-822-4434
15) Retro Moto 2500 Weaver St Haltom City, TX 76117 817-733-5664
16) M & M Service 1017 US 31 Petoskey, MI 49770 231-347-7860
17) Mihali Cycles 387 W. LA Cadena Dr # B Riverside, CA 92501 951-788-2453
18) TNT Custom Cycles LLC Rt 6. Box 6632 Knobley Rd Keyser, WV 26726 304-790-7177
19) Slabsides 2100 Winchester Blvd. Campbell, CA 95008 408-364-0284
20) Southern Cycle Inc 5400 A. Shadburn Ferry Rd Buford, GA 30518 770-945-3312
21) Illinois Harley Davidson 9950 W. Joliet Rd Countryside, IL 60525 708-387-8750
22) Gunnink’s Harley Davidson 2600 N. State St Ukiah, CA 95482 707-462-1672
23) Harley Davidson of Tucson 7355 N. I 10 Eastbound Frontage RD Tucson, AZ 85743 520-751-3380
24) Byrd Coop Customs 521 Charcot Ave # 125 San Jose, CA 95131 510-209-2072
25) Don’s Custom Cycle 8625 Harrison Pike Cleves, OH 45002 513-353-1446
26) Larry’s Custom Cycles 132 S. Winter St. Adrian, MI 49221 517-265-7709
27) KND Cycle 1027 E. 56th St Tacoma, WA 98404 253-341-3251
28) Dirty Deeds Motorcycle Company Inc 1021 Crossroads Plaza Dr Moody, AZ 35004 205-640-4404
29) Hwy 66 Choppers 4711 Arrow Hwy # D Montclair, CA 91763 909-626-1632
30) Cycles Unlimited 17202 Gothard St # 12 Huntington Beach, CA 92647 714-842-7257
–Jennifer
D & D Performance Ent
And as always RIDE SAFE &
LOUD PIPES SAVE LIVES
817-834-8961
STURGIS MOTORCYCLE HALL OF FAME 2014 INDUCTEES ANNOUNCED–The Sturgis Motorcycle Museum & Hall of Fame is pleased to announce the 2014 inductees into the Sturgis Motorcycle Museum Hall of Fame and the Freedom Fighters Hall of Fame.
The Sturgis Motorcycle Hall of Fame is designed to recognize individuals or groups who have made a long term positive impact on the motorcycle community.
The Freedom Fighters Hall of Fame recognizes the commitment and sacrifices individuals across the nation and world have made to protect the rights of motorcyclists. For 2014, the Sturgis Motorcycle Museum & Hall of Fame will honor one Freedom Fighter and induct six into the Sturgis Hall of Fame.
Deb “Tiger” Chandler – Freedom Fighters Hall of Fame – Deb “Tiger” Chandler has been an active part of the motorcycling community for over 40 years. In partnership with the Colorado Confederation of Clubs (CCOC), she assumed the role of Colorado Commander of the Coalition of Independent Riders – a registration of independent riders. Tiger has worked tirelessly through the state legislature to address issues of importance to motorcyclists in Colorado including funding for beginning rider training and alcohol interlocking devices for motorcycles. She has also been instrumental in implementing a Biker Day at the Capital in Colorado as a means of opening dialog between bikers and legislators.
Clyde Fessler – During his 25 year career at the Harley-Davidson Motor Company, Clyde Fessler played an integral role in the turnaround of the company. He served in multiple marketing positions including, Director of Marketing, Vice President of General Merchandise, Vice President of Motor Accessories, and Vice President of Business Development. He was responsible for many innovative programs, policies, products, and marketing strategies that made Harley-Davidson one of the most recognized brands in the world. Since his retirement in 2002, Fessler has remained active in motorcycling as a member of the Hamsters Motorcycle Club. He recently wrote a book, “Rebuilding the Brand” and now travels extensively as a Keynote Speaker.
Jesse Jurrens – Legend Suspensions began in 1998 when Jesse Jurrens recognized the benefits an air spring could have on motorcycles and sought to develop the technology for Harley-Davidson Softail Chassis. Eventually being convinced, Gates™ Rubber Company, the leader in air spring technology, agreed to lend their patented Kevlar impregnated rubber air spring technology to the fledgling South Dakota start-up. Since that time, Jesse has continued to develop innovative suspension systems.
Today, Sturgis South Dakota based Legend Suspensions manufactures Aero Air Suspension systems and Revo coil suspension systems for all Harley-Davidson models and Off-road UTVs. Legend Suspensions are available world-wide providing a smoother ride with “on the go” adjustability, increased vehicle capability and versatility. The Offroad systems are used by the U.S. Military and countless fire and rescue operations. Legend has become known for its innovative quality products, Lifetime Warranty, and outstanding customer service. The company is a recognized leader in suspension technology.
Jay “Lightnin’” Bentley – From the time he was a teenager, Jay Lightning rode in a motordrome owned by Pappy Boudreaux – first part-time and later full-time. Early on, Jay rode Harley Hummers as a straight rider, but soon graduated to trick riding on the wall on Indian 101 Scouts. By 1998, Jay took out a loan against his home to purchase wood and equipment to begin building what would become the American Motor Drome Wall of Death. Completed in 2000, it was the first of its kind to be built in over 50 years. For the past 14 years, the American Motor Drome has toured the country full-time. Besides keeping the drome running, Jay collects classic motorcycles and wall bikes that he displays as part of the traveling show.
Keith Terry – An avid motorcyclist since he was 15, Keith Terry’s career actually started in the automotive industry, after which he operated a company that promoted bicycle motocross races. In 1994 Keith built his first custom motorcycle, and he’s been building them ever since. Keith and his wife Fran have owned Terry Components, the largest supplier of motorcycle starter motors and battery cables in the industry for 20 years. More recently, Keith – along with Chris Malo – started Baggster LLC, a company that manufactures custom conversion kits for Harley-Davidson applications. For the last three years, Keith has been in charge of the Buffalo Chip Challenge working with Sturgis Brown High School students to build a custom bagger that is auctioned at the Legends Ride each year.
Bonnie Truett – Ask anyone in the drag racing world about who’s had a broad impact on the sport and Bonnie Truett’s name will likely come up. Bonnie started racing in the 1960s, and was constantly working to get more out of his drag bikes. He started by changing the flywheels in his own Sportster, but eventually he and his partner Paul Osborn started to create and manufacture their own flywheels, frames, cams, cylinders and rods. Bonnie continued to race until 1984, and he and Paul continued to run Truett and Osborn together until his retirement in 1997. Following his retirement from racing, Bonnie helped his son Scott who is a four time champion in Pro Drag class in AHDRA. Bonnie is well known to everyone in the drag racing world as a friend, mentor and all around good guy.
The annual Sturgis Motorcycle Hall of Fame Induction Breakfast is scheduled for Wednesday, August 6 at 9:00 a.m. at The Lodge at Deadwood in Deadwood, SD.
Breakfast tickets are available for a $35.00 donation, tables of eight for $300.00. Tickets can be purchased by calling the Museum at 605.347.2001 or they can be purchased online at http://www.sturgismuseum.com/shop/hall-fame-breakfast.
[page break]
We have decided to join the Destination family to provide our customers with an all-access pass to our complete line of drivetrain products in our large, easy to find display as well as convenient in and out for install customers.
That’s right, the Official BAKER Install crew will be on hand from March 5-17 to install the BAKER product of your choosing. While you peruse the rest of the quality merchants at Rossmeyer’s Destination Daytona, you can have your bike on one of our lifts being upgraded from a 5 speed to a 6 speed, a 6 to a 7 speed, a 5 or 6 speed Reverse system installed, new BAKER clutch, extra capacity Oil Pan, upgraded chain tensioner, and more! But call us soon – install spots are already filling up!
So please stop by the BAKER booth to check out our newest product, pick up a BAKER shirt, 2014 Poster, or let our team turn your bike into a whole new ride with one of our products!
Visit www.bakerdrivetrain.com, or call (877) 640-2004 for any further questions.
GUN NUT EDITORIAL: Connecticut gun owners revolt.
Widely flouted registration law puts legislators in a bind– Laws are more than just symbolic gestures. Connecticut’s General Assembly must come to grips with this truth before its recent effort to “save lives” ends up destroying them.
State law enforcement officials are now in the difficult position of dealing with one of the most widely flouted laws since the end of the 55 miles-per-hour speed limit and Prohibition. If it’s really serious, the state will have to find space to imprison 300,000 residents for the next five years.
The first article of the Connecticut Constitution couldn’t be more clear. “Every citizen has a right to bear arms in defense of himself and the state,” it says.
Busybodies at the Capitol in Hartford decided that “every” doesn’t really mean every, and it banned the semi-automatic rifles that would be most useful in defense of the state. As of Jan. 1, owners of arms that have a menacing appearance had to submit registration paperwork to the state.
Only about 50,000 did so. There’s no way to know how many “assault rifles” remain unregistered, but the best guess is that the new “gun safety” law instantly created 300,000 felons.
Eager to exploit the tragic shooting at Sandy Hook Elementary School in Newtown, easily frightened lawmakers rushed to add yet more hurdles to gun ownership in the state. Those wishing to possess a pistol already had to pay fees, take tests and fill out paperwork to obtain a firearms-purchase permit.
Separate permission from the state was required just to buy ammunition in a process that must be repeated every five years. Bearing arms outside the home requires another permit that the state may, or may not, issue at its discretion.
None of these hurdles prevent crime. The alleged perpetrator of the Newtown massacre obtained his weapons by murdering his own mother, in violation of the law. That’s what criminals do.
Reality is of little interest to Connecticut politicians when they’re intent on making a statement. They thought that they could compel everyone to think as they do about gun control by threatening those who disagree with a felony. It didn’t work.
Faced with 300,000 potential offenders, officials must decide whether to ignore the new law, or enforce it by sending SWAT teams to raid the homes of anyone suspected of owning the most popular rifle in America, the AR-15.
As author Radley Balko documented in “The Rise of the Warrior Cop,” sending squads crashing through doors unannounced in the middle of the night frequently results in death and injury for innocent bystanders.
Even family pets aren’t spared. Rampaging cops in Prince George’s County, Md., for example, killed Chase and Payton, the gentle Labrador retrievers belonging to Berwyn Heights Mayor Cheye Calvo. The cops expected to find drugs in the raid; instead, they terrorized an innocent family.
Repeating similar scenes 300,000 times in Connecticut would create the very “gun violence” that the misguided registration law was supposed to prevent. Even if all of these citizens turned themselves in peacefully, it would bankrupt the state.
Currently, Connecticut’s 15 prisons hold 16,839 behind bars at an annual cost of $620 million. Full compliance with the gun law would exceed the entire state budget at $55 billion.
We hope that calmer heads prevail in Hartford. Respect for the law is essential for society, but this presupposes the laws themselves are worthy of respect.
www.washingtontimes.com/news/2014/feb/19
UNCLE MONKEY HITS THE DISCOUNT TOOL STORE–As I perused the aisles of our local discount tool store I kept crossing path with another soul wander the aisle. With each passing his eyes got wider and wider as I fetched tool after tool. Finally he asked me if I really used all those tools. I explained how this was used to do that – that was used to do this and so on.
He was bewildered that there were so many tools available. It was apparent he was one of those hand tool box guys, probably one of those tools in a Tupperware box guys. He was dumbfounded by the selection of tools beyond his “star” and “square” screwdrivers and butter knife.
I’ll be the first to admit I have way too many tools being better equipped then many garages but having the proper tool to do the proper job makes life a hell of a lot easier. I generally try to buy good quality tools with life-time warranties made in North America and while some of the tools I was buying that day were questionable the one or two times that they would be put into service they would suffice.
I asked what he was after – pliers. As we made our way over to the section I asked what his project was and what he needed pliers for. It was apparent what he needed was ViceGrips so I explained how they worked, some of the things to use them for and wished him luck. He later tracked me down in the air tools section to thank me.
He was a paper and pencil guy (I suppose I should say iPad and finger guy in this day and age), lived in a new house, drove a new car, and never fixed anything in his life let alone assemble anything IKEA.
Wondering around that day watching people buy English Wheels, bench grinders, torches, work benches and every hand tool imaginable he had gained a new respect for blue collar workers, for the men and women who manufacture this world we live in. As the disposable society that we are there are still people spinning wrenches to keep this world spinning.
-bad Uncle Monkey
BOOKS AVAILABLE FROM BILL HAYES– Look for my upcoming book, Hell on Wheels: An Illustrated History of Outlaw Motorcycle Clubs due for release in Spring 2014.
http://TheOriginalWildOnes.com
http://www.BikerMediaUSA.com
Our newest book, Triumphs and Tragedies: A True Story of Wealth and Addiction is available now at www.triumphsandtragediesthebook.com
Our IPPY Award winning Hullabaloo! The Life and (Mis)Adventures of L.A. Radio Legend, Dave Hull is available at www.davehullthehullabalooer.com
All of my other books are available at my eBay store ( http://stores.ebay.com/Biker-Books-DVDs-and-Music ), at http://BikerMediaUSA.com or on Amazon!
–Bill “Press” Hayes
Boozefighters MC
DAYTONA BIKE WEEK OPPORTUNITY FROM KLOCK WERKS–Call today to Save the Date for your Klock Werks Powered by Kicker Audio Install at Daytona Bike Week!
Are you ready to LIVE LOUD? Klock Werks has teamed up with Kicker Audio to offer you the clearest and loudest audio system upgrade available! Audio Kits now available for your 96-13 FLH and FLTR Models, as well as complete Tour Pack kits!
50 bucks saves you a spot for your installation on the day that fits best with your vacation. First come first served installations start March 7th – so call to reserve your spot! Standard kit installation is FREE with purchase of Klock Werks powered by Kicker audio kit.
Call 605-996-3700 today!
SADDLEMEN UNVEILS NEW COMPANY LOGO– Aftermarket Motorcycle Seat and Accessory Innovator Launches Rebranding Campaign.
Saddlemen today launched a new company logo, making it the most significant visual change for the company brand since 1987. Using an updated version of the company’s iconic Saddlemen script, the logo better reflects the brand as it travels through the 21st century.
“Our new logo better communicates what the brand stands for today,” said Saddlemen CEO David Echert. “We’ve kept some of the same visual elements to reflect our heritage, but also incorporated a forward-thinking mindset to establish a logo that will attract the next generation of motorcycle dealers and enthusiasts.”
Designed in-house, Saddlemen will begin rolling out new branding materials with the updated logo across all its platforms, from marketing collateral to sponsorship proposals, immediately.
If you wish to receive a copy of the latest Saddlemen Style Guide, please click on their banner.
LAST DAY OF THE BRASS BALLS CHALLENGE COIN PROMOTION–Don’t miss out on our campaign.
Brass Balls Challenge Coin & Fuel Caps!– The new Brass Balls Cycles Challenge Coin Fuel Cap is almost ready for production. Only 2 days left to reserve yours at a discount.
Machined from billet aluminum and offered in 3 finishes and 3 different diameter coin sizes to ensure fitment to most challenge coins.
These are machined right here in Oklahoma City, OK. USA
First 100 orders get a $20 discount on your cap. Reserve Yours Now!
We are also launching our Commemorative Brass Balls Cycles Challenge Coin.
2-inch diameter x 3mm thick.
Created from hand sculpted 3-D molds for a high relief surface.
Hand painted and sealed with fuel resistant coating.
Minted in the USA at the Northwest Territorial Mint.
Limited edition. First 100 are numbered sequentially.
First 100 orders get an $8.95 discount per coin. Reserve Yours Now!
CHEAP PLACE PATCH OF THE WEEK–Sorry I forgot to submit a patch for last week. Here is the submission for this week:
Are you a lone wolf? Do you prefer the wide and open road to yourself? Then this patch is for you with a looming wolf staring out at everyone you pass! Do not iron onto leather clothing however as it will cause damage. Instead use the thick die cut borders which give this 10 x 11 inch patch a cleaner finish.
http://www.thecheapplace.com/Lone-Wolf-No-Club-2-Patch
BIKERNET’S NEWS ITEM OF THE YEAR, SO FAR–Diamond D’s brothel began construction on an expansion of their building to increase their ever-growing business. In response, the local Baptist Church started a campaign to block the business from expanding — with morning, afternoon, and evening prayer sessions at their church.
Work on Diamond D’s progressed right up until the week before the grand reopening when lightning struck the whorehouse and burned it to the ground!
After the cat-house was burned to the ground by the lightning strike, the church folks were rather smug in their outlook, bragging about “the power of prayer.”
But late last week ‘Big Jugs’ Jill Diamond, the owner/madam, sued the church, the preacher and the entire congregation on the grounds that the church …. “was ultimately responsible for the demise of her building and her business — either through direct or indirect divine actions or means.”
In its reply to the court, the church vehemently and voraciously denied any and all responsibility or any connection to the building’s demise.
The crusty old judge read through the plaintiff’s complaint and the defendant’s reply, and at the opening hearing he commented, “I don’t know how the hell I’m going to decide this case, but it appears from the paperwork, that we now have a whorehouse owner who staunchly believes in the power of prayer, and an entire church congregation that thinks it’s all bullshit”.
–Frank Murphy
Las Vegas NV
BIKERNET’S OFFICIALLY CERTIFIED BIKER PHILOSOPHER SPEAKS OF CHOICE–Life always presents us with many choices
There are two primary choices in life: to accept conditions as they exist, or accept the responsibility for changing them. –Denis Waitley
Let us be clear as we start today that we will be filed with choices throughout this and every day. The most important choice is who is going to have the Power over your day, you or someone else. I know that precedent has no Power over the present.
All that counts is the present, the only Power that the past, future or some else has over us is what we give it. Today is a gift in which we move to a Higher level of Consciousness, of expression and of living. We have learned from the past, so we can have a better present, no longer do we need to repeat the past, it is now the past.
When we move into this Consciousness The Universe will respond to our Consciousness supplying us with what we choose. As we are faced with challenges we should Pause go within, if only for a second, and call on that Infinite Power within for the answer and Know we have the solution. Remember only you have the choice of how you choose to handle each and every situation.
And So It Is
Namaste’
“Alice came to a fork in the road. ‘Which road do I take?’ she asked.
‘Where do you want to go?’ responded the Cheshire Cat.
‘I don’t know,’ Alice answered.
‘Then,’ said the Cat, ‘it doesn’t matter.”
–Yale
Yale Custom Cycles
403-453-1999
2003 11 ST SE
Calgary AB
T2G 3G6
ALL NEW PAUGHCO BUILT DENVER’S TWISTED FRONT LEG SPRINGERS–Paughco recently joined forces with Mondo at Denver’s Choppers to produce these awesome twisted front leg springers.
Available exclusively from Paughco they come in a variety of lengths and with several unique options including: chrome, black powdercoat and brass finishes, tapered oval or half round rear legs and with or without shock.
Have it your way with the benefits that come with owning a Paugho manufactured springer front end. Paughco offers the complete TWISTED SPRINGER starting at just $1652.95 or if you already have one of the company’s front ends you can purchase the twisted front legs separately for $500!
Call direct to 775-246-5738 for complete details on the new front ends and replacing your current front legs with the twisted option. www.paughco.com
ZIENMemo to MRF/NCOM Board of Directors– Please internalize this multi-dimensional Petition Challenge. The cohesiveness and camaraderie for our organizations could be mutually beneficial. This petition drive could energize our massive coalitions. The message sent is “we are the message!”
Yes, there are some issues that we might not agree upon – but surely they deserve consideration. In doing so, our brothers, sisters and new folks can feel ownership in the future of motorcycles. Perhaps forget the territorialism and feelings – it’s for us together!
Feel free to alter, grab the throttle, kick-start, add fuel to the fire or take the credit. Yes, we just might find out who are the movers and doers. Motorcycle courage, creativity, character and charisma are real!
In the petition drive effort, we will “discover hidden resources and harness unlimited potential!”.
As ever, your constructive feedback is appreciated.
God Bless You
Pray to Live
–Dave Zien
former State Senator
Million Mile Motorcycle Man
TO: February 26, 2014
Board of Directors (BOD) — American Motorcycle Manufacturers
Harley-Davidson
Also:
AMA Motorcycle Museum & Hall of fame, Pickerington, Ohio
National Motorcycle Museum, Anamosa, Iowa
Sturgis Motorcycle Museum – Freedom Fighter Hall of Fame, Sturgis, South Dakota
Induct ASMI: Tony & Vicki SanFelipo
Iron Butt Association; Michael Kneebone
MRF; Kirk “Hardtail” Willard, Dave Dwyer and Buck Kittredge
NCOM; Bill Bish, Richard Lester and Doc Reichenbach II.
Promote follow-up sequels for recent motorcycle movies: Born to Ride (2010), Dead in Five Heartbeats & Easy Rider II.
Spearhead Motorcycle (HD?) Heritage Hwy of Honor; U.S. Hwy 45 from Octonagon (Lake Superior) Michigan to Galveston (Gulf of Mexico) Texas.
Place historical markers for famous Biker or events i.e. Louisiana where Peter Fonda and Dennis Hopper were shot off their Harley-Davidsons in Easy Rider (also at the restaurant where they were not served, “because they were Bikers!”
Internalize as advisory to BOD’s, “Motorcycle, Movie, Music, Museum Memoir Committee (MCMMMMC).
Create a Speakers Bureau concept where fraternal, civic and volunteer groups are addressed by Bikers for Mystique, Heritage, Spiritual and Enjoyment aspects.
Pursue the Million Motorcycle Tribute at Big Bend, Wisconsin “Recognizing Miracles and Honoring God’s Holy Spirit which works in supernatural, mysterious and multi-dimensional ways.”
Serve Veterans/military/patriots through the VERC (Veterans Empowerment Resource Command) which helps with VA claims, appraises military artifacts, video-recording for state and national museums and assists in attaining military ribbons, medals, medical and personal records.
Appreciate the 157 stone monuments, flag and poles dedicated to Wisconsin Bikers.
Restore the American Motorcyclists Tribute to its original intent, Chippewa Falls, Wisconsin.
Monitor progress & make inroads through Bikernet.com and Two Wheel Thunder TV.
Examine the new group promoting those being mobility challenged to attain or regain motorcycle freedom. Includes modifications, three wheelers and extensive earned media campaign.
Re-energize the ASMI movement to help some lives and gain more respect.
Give more free motorcycle rides as appropriate; complete with liability release, pictures and feedback.
Coordinate activities, as desired, with State Departments of Tourism, Veteran Affairs and Historical Societies.
Consider news releases, letters to editor, editorial boards, media advisories, columns – before, during and after major events.
NAME ADDRESS PHONE E-MAIL
__________________________________________________
_________________________________Petition Circulator __________________________________
Return to former Senator Dave Zien, Million Mile Motorcycle Man,
1716 63rd St.,
Eau Claire, WI 54703
davezien@gmail.com
16th ANNUAL SOUTHEND SHAKEDOWN!–Dust off those winter blues, rev up and join Ace Cafe London’s first major ride out of the year,the 16th annual Southend Shakedown, departing the legendary North London venue at 10.30am on Easter Bank Holiday Monday 21st April.
Being Easter, and as in previous years, this free to attend, fun day out at the seaside, with stands and displays has always involved a charity aspect focusing on children. This years Shakedown is again in aid of the registered children’s charity, the NSPCC, which depends for its funding on voluntary donations – either at the cafe, or on Southend’s seafront.
For more information about the work of and how you can support the NSPCC check out
The route from Ace to Southend: A406 East to A12 East, to A127 East and Southend seafront.
All Enquiries: Clubs, Individuals, Trade Stands, Contact: enquiries@ace-cafe-london.com
[page break]
QUEENSLAND STAR CHAMBER TO INVESTIGATE INAPPROPRIATE BIKER LINKS– Investigators in the Australian state of Queensland say they have obtained intelligence pointing to “inappropriate relationships’’ between bikers, police and public servants.
The Crime and Misconduct Commission’s specialised Police and Public Sector Corruption Team is looking at suspicious relationships between the groups.
While stressing investigations were in their infancy, the CMC has revealed its own intelligence has raised red flags and that it has also received a number of complaints from whistleblowers.
In an a PR interview with local media, acting CMC chairman Dr Ken Levy said the team was investigating a number of matters and “conducting proactive target development strategies with a view to identifying future investigations’’.
“These investigations relate to police officers, civilian police employees and employees of public sector agencies,” he said.
Levy said that in just five months 73 people – mostly motorcycle club office bearers and former and current members – had been summoned before the Star Chamber style closed hearings to provide evidence about their knowledge of the clubs, with the workload prompting the construction of another ‘coercive’ hearing room.
Those who refuse to take an oath or answer questions are sent to the Supreme Court for sentencing. Six people who refused to provide information have been sentenced to from 28 days to seven months’ jail.
“These new hearings provide the CMC and its law enforcement partners an accurate and contemporary picture of how criminal motorcycle gangs in Queensland operate and the extent of their involvement in criminal behaviour,’’ Levy said.
“Some of the themes include how sophisticated the internal structures of criminal motorcycle gangs are and the level of infiltration of certain industries.”
Levy said some motorcycle clubs were “playing a game of cat and mouse” to test whether they could outlast tough new laws.
“Some (motorcycle clubs) are having a watch-and-wait sort of approach to see what happens with the legislation,” he said.
“Certainly, some have said, ‘we resigned,’ some have said, ‘we’ve gone interstate’, we really don’t know the numbers.
“Despite what they say, to say categorically that they’ve left clubs in droves or (are) playing a game of cat and mouse is hard to know.”
Levy said while many ordinary Queenslanders might never be directly affected by bikers, all were indirectly touched.
“The profound personal, family and community impacts of illicit drug use are well recorded, especially the links to property and violent crimes that are fuelled by illicit drug addiction,” he said.
“There are also broader impacts including the burden on Queensland hospital and health services as a result of drug use or drug-related violence.”
BIKERNET 5-Ball RACING WHEELER REPORT—
Adrenaline Junky Racing Agenda
****Mojave Mile****To be announced****12,000 foot runway, one mile shutdown….
****Texas Mile****March 2014****
****Mojave Mile****7th Year****March 12-13****
****El Mirage****5-17/18, 6-22, 7-13, 9-14, 10-19, 11/8-9****
****S C T A Speed Week****August 9-15, 2014****
****BUB Speed Trials****August 23-28****
****World Finals****Sept. 30—-October 3, 2014****
****E C T A Ohio Mile****5/3-4****6/7-8****7/12-13****9/27-28****
Just heard that spring is hiding around the lucky tree a block from the next corner, followed by 2015. Seems that just a few days ago, in the spring of 1958 I was wishing for the magic age of 14 and my time for driving lessons and a learners permit. THE permit that further fueled my addiction to roll endless miles on the highways seeking my small piece of tranquility and freedom. The highway is still calling and the quest for freedom continues.
Still seeking peace of mind and personal freedom in the form of two wheels while rollin’ over freshly dried asphalt on an endless highway with a huge NO SPEED LIMIT sign. Might find the NO SPEED LIMIT this summer at the BUB Speed Trials on the Bonneville Salt Flats. So, in an attempt to fulfill the dream, we’re in what might be called the final stages of building the ride of all rides. Of course the next build is on the drawing board with notes and sketches galore.
The 5-Ball Racing Teams Twin-Cam Raycer is happily perched on a Handy Lift with a shorter list than when we started about 2 years ago in Salem, Oregon at Rick Tedders with two pieces of bent pipe and a chalk drawing on the shop floor.
This week Dr. Willie removed the internals out of our polished Evo type transmission. We’re replacing it with a 4-bolts-to-the-engine twin cam transmission case for a solid foundation. The battery box was removed and the bottom dropped an inch for a little more room for the mandatory shit that’s hard to run without. The wiring, a bad ass, lightweight Shorai battery, fuse blocks, etc.
Were re-locating the oxygen sensor, re-engineering the Turbo mounting system then head back together.
Stay Tuned….and check out the Cantina while your trying to relax. Just shipped a Super membership package to one of our latest, lucky members.
Haul Ass!
Ride for Your Life!
Ray C Wheeler
Performance Editor
wheeler@bikernet.com
QUICK, OPEN THE BIKERNET BAD JOKE LIBRARY–
I’ve accidentally swallowed some Scrabble tiles. My next crap could spell disaster.
The other night, my wife asked me how many women I’d
slept with. I told her, “Only you. All the others kept me awake all night!”
My missus packed my bags, and as I walked out the front
door, she screamed, “I wish you a slow and painful
death, you bastard!”
“Oh,” I replied, “so now you want me to stay!”
–Jim Waggaman
NEW .357 SINGLE ACTION–Wait ’til u see my new 45s I have comin’. These are totally kick ass, AND I have a pair comin!!!!!!! Let’s go shooting one day !!!!!
–EDR
BRAND NEW BIKERNET BAGGERS–New Bikernet Reader Comment!–Protection Against Speeding Tickets
http://www.bikernetbaggers.com/pages/story_detail.aspx?id=12725
Good article. How did you level the detector, with or without someone on the bike. How does the weigh and change of angle affect the detector? Food for thought.
–Raymond Paquette
rypqt@hotmail.com
Milford, PA
Do you like to read a good murder mystery?
Not even Law and Order would attempt to capture this mess. This is an unbelievable twist of fate!!!!
At the 1994 annual awards dinner given for Forensic Science, (AAFS)President, Dr. Don Harper Mills astounded his audience with the legal complications of a bizarre death. Here is the story:
On March 23, 1994……. the medical examiner viewed the body of Ronald Opus, and concluded that he died from a shotgun wound to the head.
Mr. Opus had jumped from the top of a ten-story building intending to commit suicide..
He left a note to the effect indicating his despondency. As he fell past the ninth floor, his life was interrupted by a shotgun blast passing through a window, which killed him instantly.
Neither the shooter nor the deceased was aware that a safety net had been installed just below the eighth floor level to protect some building workers and that Ronald Opus would not have been able to complete his suicide the way he had planned.
The room on the ninth floor, where the shotgun blast emanated, was occupied by an elderly man and his wife. They were arguing vigorously and he was threatening her with a shotgun! The man was so upset that when he pulled the trigger, he completely missed his wife, and the pellets went through the window, striking Mr. Opus.
When one intends to kill subject ‘A’ but kills subject ‘B’ in the attempt, one is guilty of the murder of subject ‘B.’
When confronted with the murder charge, the old man and his wife were both adamant, and both said that they thought the shotgun was not loaded. The old man said it was a long-standing habit to threaten his wife with the unloaded shotgun. He had no intention to murder her. Therefore the killing of Mr. Opus appeared to be an accident; that is, assuming the gun had been accidentally loaded.
The continuing investigation turned up a witness who saw the old couple’s son loading the shotgun about six weeks prior to the fatal accident.. It transpired that the old lady had cut off her son’s financial support and the son, knowing the propensity of his father to use the shotgun threateningly, loaded the gun with the expectation that his father would shoot his mother.
Since the loader of the gun was aware of this, he was guilty of the murder even though he didn’t actually pull the trigger. The case now becomes one of murder on the part of the son for the death of Ronald Opus.
Now comes the exquisite twist… Further investigation revealed that the son was, in fact, Ronald Opus. He had become increasingly despondent over the failure of his attempt to engineer his mother’s murder.
This led him to jump off the ten-story building on March 23rd, only to be killed by a shotgun blast passing through the ninth story window.
The son, Ronald Opus, had actually murdered himself. So the medical examiner closed the case as a suicide.
A true story from Associated Press.
–from Jim Waggaman
Most believe that is because they do Not want The Public to Know What Is In them.
RHODE ISLAND Providence:
The American Civil Liberties Union of Rhode Island has filed a lawsuit against state police and the Department of Corrections over fees for public records. The Providence Journal reported that the state affiliate of the ACLU sued the two agencies Monday on behalf of a small community group, the Olneyville Neighborhood Association.
–from Rogue
THE LASTEST TRAVEL BOOK FROM MOTORBOOKS–Motorbooks is about to release a rip-roaring motorcycle adventure story and I wanted to offer you one of the first review copies. This is one of the most entertaining and adventurous books to come across my desk in years. Your audience would LOVE it.
Down and Out in Patagonia, Kamchatka, and Timbuktu:
Greg Frazier’s Round and Round and Round the World Motorcycle Journey
A little over 40 years ago, a man named Gregory W. Frazier got on his motorcycle, went for a ride, and never returned. He’s still out there, circumnavigating the globe: exploring the jungles of Asia in the winter, trout fishing in Alaska in the summer, and covering all points in between during the rest of the year.
He’s been shot at by rebels, jailed by unfriendly authorities, bitten by snakes, run over by Pamplona bulls, and smitten by a product of Adam’s rib. He’s circled the globe five times and has covered well over one million miles (and counting). During those past four decades, Dr. Frazier has been chronicling and photographing his around-the-world adventures, publishing 13 books on the subject (including one previous title for Motorbooks), the majority of which have been manuals for touring specific locations or general how-to-tour-by-motorcycles.
He has also produced 9 documentary DVDs on the same subject. But until now, nothing in print has encompassed the entirety of his worldwide motorcycle adventures.
Now, for the first time, he has written his on-the-road autobiography that captures the whole of his extraordinary travels in words and images. Down and Out in Patagonia, Kamchatka, and Timbuktu tells the amazing ongoing story of Dr. Frazier, one of the world’s single most well-traveled motorcyclists.
BAD COP FILE NOW OPEN–WASHINGTON Seattle: Mayor Ed Murray said he was wrong to support a decision by the police chief to erase a misconduct finding against an officer who threatened a journalist.
–Rogue
WISDOM OF AN OLDER MAN!–Regardless of Age or Gender You Know It’s
True.
An older man approached an attractive younger woman at a shopping mall.
”Excuse me; I can’t seem to find my wife. Can you talk to me for a couple of minutes?”
The woman, feeling a bit of compassion for the old fellow, said, ”Of course, sir. Do you know where your wife might be?”
”I have no idea, but every time I talk to a woman with tits like yours, she seems to appear out of nowhere.”
–from Jim Waggaman
5-BALL RACING TO BE FEATURE IN CYCLE SOURCE MAGAZINE—Hang on for the next issue and a full report about the history of the 5-Ball brand and racing team.
CHOPPERTOWN DVD OF THE WEEK–Just a quick reminder! We got permission from Piero to do a limited run of all the Mad Fabricators DVDs that are out of print. Get your order in today, they ship in about two weeks. When they’re gone, they’re gone!
We even put together a Mad Fabs SUPER COMBO so you can get all nine titles for a special price. Check it out!
When we were shooting Choppertown in 2004 there were rumors of this cool VHS tape being passed around the hot rod scene and we were really inspired that someone had made a cool film about that scene and it gave us hope something cool might happen once Choppertown was finished. Mad Fabs set the stage! Cheers Piero, congrats.
Stay independent,
–Zack and Scott
One World Studios Ltd.
KUSTOMS INC ULTIMATE BUILDER VIDEO JUST RELEASED– Hey Gary! I finished your Ultimate Builder video that I shot of you in NOVI a few months ago. Hang on!
–Steve Goers
Marketing Communications Coordinator
Workshop Hero – a division of Armor Protective Packaging
800-365-1117
Fax 517-546-6434
sgoers@workshophero.com
www.workshophero.com
NEBRASKA Omaha: A civil liberties organization is suing the prison system on behalf of two inmates who said their constitutional rights are being violated because they haven’t been allowed to marry each other. The American Civil Liberties Union filed the lawsuit on behalf of inmates Paul Gillpatrick and Niccole Wetherell.
SOUTH DAKOTA Deadwood: The town continues to struggle with a stagnant gambling market. Gambling revenue in January was down 3.8% from the same month last year, to about $7.5 million, according to data from the Gaming Commission. Parking is a nightmare.
NEW JERSEY Trenton: A hearing is set for today on whether Mayor Tony Mack should be removed from office after his conviction this month of bribery, fraud and extortion. Mack has requested an earlier hearing today on his request to remain in office until he’s sentenced.
ARIZONA Phoenix: A state House committee has approved a bill that would require cities and towns to calibrate photo radar cameras every 24 hours.
UTAH Salt Lake City: An attorney who works in the Salt Lake City attorney’s office has been arrested on suspicion of drug possession. The Deseret News reported that James Wesley Robinson, 50, and his two sons were arrested at his home here.
VERMONT Waterbury: Vermont State Police said they have received an armored tactical vehicle from the U.S. Defense Department’s military surplus program. Vermont now has a Mine Resistant Ambush Protected vehicle that officials said could support law enforcement during confrontations.
–from Rogue
BIKERNET INDIA CORRESPONDENT WINS MARTIAL ARTS COMPETITION– 23 Jan 2014, I won Bronze in all India National Karate Championship held at Sports Authority of India, Mumbai. It was in full contact fighting in Adults Open Category. No injuries. Still a rush of blood in me.
Best Wishes,
Ujjwal Dey
www.UjjwalDey.com ~ www.FreedomFiction.com ~ www.IQmind.org
www.GovernaTorr.com ~ www.Orison.co ~ www.GoodNews.name
“Revolution requires unbounded ideas” ~ Raymond Hamilton
HANG ON FOR LOWBROWS Introduction: The Best Cable Guides Ever Made–Wayward motorcycle cables giving you the blues? We have the cure for that which ails you.
Lowbrow Cable Guides are CNC’d 6061 T-6 alloy with stainless steel threaded insert and hardware, avoiding such calamities as pulled and stripped threads from over-tightening.
The large radius on the perimeter of the Cable Guides flows nicely with your frame, an elegant solution to a common problem.
Available in several bores (for 1″, 1-1/8″ and 1-1/4″ tubing) and cable hole diameters (your choice of 1/4″ or 3/8″) to solve most needs, as well as in polished or black electroplate.
Available world-wide, 24/7 via www.lowbrowcustoms.com or call toll free 1-855-4LOWBROW.
BAD COP FILE NOW OPEN IN GREEN COVE SPRINGS Florida–Mix-up keeps 17-year-old jailed
Three northeast Florida sheriff’s deputies have been disciplined after an arrest mix-up sent the wrong teenager to jail.
The 17-year-old spent 35 days in the Clay County jail after being charged as an adult in a sexual battery case.
One deputy also faces a suspension and a transfer.
The Florida Times-Union
reports that in a disciplinary letter, Sheriff Rick Beseler wrote that because of that deputy’s incompetence, “an innocent man was arrested for an offense that he did not commit.” Authorities say investigators had been seeking another student at the same high school with the same name.
–from Rogue
INTERMOT 2014: Positive interim results after the first Early Bird offer–All signs are positive for the INTERMOT Cologne, the leading international trade fair for motorcycles, scooters and e-bikes.
Six months before the fair begins, the forecast looks great! By the end of January, around 400 exhibitors from 31 countries had already taken advantage of the Early Bird discount offer, confirming their participation in the fair for trade experts and the public which runs from October 1-5, 2014 on the Cologne exhibition grounds.
Big-name brands on the exhibitor lists emphasise the leading role played by INTERMOT Köln in the European market. A second Early Bird offer gives exhibitors another opportunity to avail of an early-booking discount. In addition to the better booking conditions, early booking increases the exhibitor’s chances of procuring first class stand positioning amongst the industry key players who have already signed up. First come, first serve conditions apply.
The list of exhibitors includes key players from across the industry. In addition to registration by BMW Motorcycles, Ducati, Harley-Davidson, Honda, Kawasaki, KTM, Suzuki, Triumph and Yamaha in the motorcycle category, Horex, Husqvarna and Victory have confirmed their INTERMOT participation. The impressive sign-ups already promise a very impressive fair!
And if that weren’t enough, registration in other areas is also on the up. In Clothing, iXS, Rukka, Daytona, Nolan and Schuberth, among others, will present their latest products. In Parts/Accessories, names like Alpha Technik, Matthies, Parts Europe, Rizoma and Öhlins will be represented, among many others!
The list of big-name participants is complemented by prominent returning as well as new exhibitors like Akrapovic (Parts/Accessories), Bimota by Wilbers (Vehicles) Locatelli/Airoh (Helmets), Rev’lt (Clothing) and Yuasa (Batteries).
INTERMOT Köln – October 1-5, 2014
Koelnmesse has been bringing people and markets together for 90 years. The success story of Cologne trade fairs began in 1924 with the opening of the first event on the exhibition grounds in Cologne-Deutz. During the “economic miracle” of the post-World War II era, the “Rheinische Messe” became a global trading center. Today Koelnmesse has the world’s fifth-largest exhibition complex and organizes approximately 75 trade fairs in Cologne and all over the world. During its anniversary year of 2014, Koelnmesse is bringing its history to the public’s attention through numerous activities, publications, and exhibitions.
For further information visit www.intermot-cologne.com
INTERMOT Cologne
1 to 5 October 2014
NEW ZIPPER’S HIGH FLOW AIR CLEANER for 2014 Rushmore Touring Models–If the end goal is more power, you must start at the beginning!
H-D’s 2014 Project Rushmore Touring models are equipped with a new air filter assembly featuring a distinctive, round cover. Our new High Flow Air Cleaner kit increases performance while keeping a stealthy, stock look.
It features a CNC-machined billet backing plate that fully supports the Rushmore cover and is equipped with additional air ports with a fully radiused entry for smooth airflow gains. Equipped with a washable, oiled gauze element, this unit outflows the factory system by 47 percent and can be installed in less than 10 minutes.
Completely and proudly Made in the USA!
For more information, contact:
ZIPPER’S PERFORMANCE PRODUCTS
6655-A Amberton Drive, Elkridge, MD 21075 Phone 410.579.2828 Fax 410.579.2835
www.zippersperformance.com
QUICK, New Bikernet Reader Comment!–Installment #03 – 1970 Yuma Prison Run
http://www.bikernet.com/pages/story_detail.aspx?id=11430
Were you also at the 1971 Yuma Run? That was my first run. I wrote about it in my book “Kick Start” memories of an outlaw biker. Did you know any of the people who where shot in ’71?
–Teach Elrod
baronteach@gmail.com
JIMS Ignition Switch Housing Alignment Tool–For use on 2014 FL Touring Models
The professional technician needs fast and accurate alignment of the ignition switch cover. Fiddling with screwdrivers and coat hangers does not cut it! Our alignment tool is the perfect solution; correct alignment is quickly and easily achieved. This tool is for 2014 and later touring models and based on our proven design for earlier models. For more information contact us at sales@jimsusa.com, visit www.jimsusa.com, or call (805)-482-6913.
I have attached a product description for this new product release, as well as images for your use. Thank you for your continued support of our products. If you have any questions please feel free to call me at 805-482-6913. I greatly appreciate your time in reviewing this press release, as well as any past and future coverage.
–Paul Platts
Director of Product & Business Development
JIMS
555 Dawson Drive
Camarillo, CA 93012
Ph 805.482.6913 / Fx 805.482.9224
LIFE IS ALL ABOUT CHOICES—I found Yale’s description sorta confusing. I tell kids, “Life is all about choices!” You can choose to go to college or get drunk and chase girls. You can choose to get up and go to work or do drugs and risk losing your job. You can choose to help folks, or shine them on. Big choices and little choices, they impact your entire life or maybe just today.
It’s fascinating. If you choose to help, to build, to benefit, to learn, you can’t go wrong, and each one of these items will ultimately pay off. It’s like investing. As a young person invest in yourself through education. As an adult invest in friendships, relationships, your future, and build for the future.
So, a kid can take a 100-buck bill and choose to invest it in his motorcycle, in a painting, in his home, in a bank account, or a stock purchase. He can loan it to a friend, or he can buy a bottle of whiskey and a steak dinner, or buy drugs with it.
If you choose to invest, then sometime in the near future you’ll be able to buy that bottle of whiskey and a steak dinner for you and a girlfriend, while your investments are working for you. All about Choices.
So, make some good choices this week, and report in to Bikernet with your results.
Ride Free Forever!
–Bandit
