Skip to main content

Kickstands for lowered FLs by Pingel

By February 7, 2013General Posts

Bikernet spotted this clever new product at V-Twin Expo. Check it out!

With the newer Harley-Davidson’s and their taller seat heights, have you considered lowering the front and rear to get better handling with your bike?   If you have, you need a kickstand that will work and keep your bike upright safely because the stock kickstand will lean the bike to the right too much and it will want to fall over.   Pingel Enterprise, Inc. has designed 2 kickstand models for lowered bikes with a model for 1” lowered front and rear bikes and one for 2” lowered front and 1” lowered rear bikes.   These kickstands are handcrafted in the USA, made of steel, tig welded and beautifully hand polished and then chrome plated.  They are designed to mount to the stock mount and will accept the stock spring.  Unlike the stock H-D kickstand, these models have a large surface foot pad contact area to support the bike better on the ground.  The kick tab is also easily accessible for use with stock and oversized primary covers.   Pingel also has a stock replacement model which has a lesser lean angle to make it easier to get the heavy bike off its kickstand.  To be used with the Pingel 1” rear lowering kits.

Go to Pingel to see this and many more products for your motorcycle.