Bikernet West - The Chop Lives — Bikernet Blog

With the final Joker Machine forward controls bolted in place on the Daytec stretch, Bandit began his test ride period. With 300 miles estimated on the machine, a full fluid change took place and only one element was left hanging–the speedometer. For Bandit, trip gauges act as gas gauges. Once he knows the mileage capacity of his tank, he resets his trip gauge to zero at each gas stop and rolls.

We plan to back up the shots here with an article on Joker Machine components that went into making this bike the hot shot it is.

Rich, the designer at Joker, who lives in a small air-conditioned cubby hole in the pristine Joker Machine facility, put a great deal of thinking into their components. For instance, their foot pegs have an Allen set screw between the body and the peg to adjust the angle of the peg. So, if your foot is vibrating or sliding off, you can fix the bastard and not suffer. That’s just one of many well-thought-through elements in their components. Besides, they look hot as hell.

The speedometer arrived from the Dallas Easyriders with a little over 24 hours to kick-off. The cable was coiled in a cardboard box waiting and the drive unit was already bolted to the front wheel. Unfortunately, the cable was the wrong unit and a hunt began for the proper cap. A call from Phil, the Hamster painter, encouraged Bandit to send a young lady to see Jim at Drag Bike Engineering. He had the cable and, at three in the morning, Bandit was installing it.

We will also follow this series with an article on the Weerd Bros. front ends. This is a ball-milled wide glide that, depending on what ruler you use, is approximately 14-over. According to Bandit, who is in the garage packing as I hit the keys, the front end is light handling with narrowed flat track bars due to the six degrees of additional rake. Even with an overall 44 degrees of rake, the front sliders are smooth and work effortlessly. Although this is a European-built front end with metric Allen head fasteners, it’s highly adjustable with removable fender mounts and brake caliper mounts that can be installed on both lowers or either one or none for the hardcore muthas.

Bandit’s about to take his Blue Flame for a final test ride with his bed roll centered over the Weerd Bros. front end. Yesterday, during the heat of the harbor day, a small Fed Ex package arrived. It was from C.J., the old biker engraver. Inside was a Bikernet engraved point cover, a “Bandit” money clip, and a flamed mag light. When more photography is revealed of the Blue Flame, the Bikernet logo with our babe mascot will be revealed in all her nearly nude glory. Damn, when she walks into the sagging headquarters, everything stops, as if a contact high permeated the garage. In a daze we watch her every fluid move. By reader demand we will post a photograph of the lavish facility in the next couple of weeks.

The bastard is rolling out in the wee hours of the morning and the race will be on for the Badlands. Agent Zebra will be heading out of Miami at noon on Saturday heading north and into Tennessee, as Bandit heads east across the border into Arizona where he will relieve his helmet of duty and ride on in freedom toward Phoenix.