Motorcycle riding rules including clothing gear for US Army troops abroad


by Keith Pannell from https://www.army.mil

Clearing up confusion on motorcycle gear

BAUMHOLDER, Germany – The warmer weather means more motorcycle riders are taking advantage of Germany’s scenic roads. Riders should also take time to reacquaint themselves with the garrison and U.S. Army Europe-Africa motorcycle policies.

Some rules may seem obvious: “Motorcycle operators will ride only on the permanently attached seat,” according to the joint U.S. Army Europe-Africa Regulation 190-1/U.S. Air Force Europe-Africa Instruction 31-202, Section 5-6, b, 1, (June 18, 2020). But, there may be some other “guidance” which has been passed down from other riders that may not be exactly accurate.

“Active-duty service members, civilian employees, contractors and family members are required to have a U.S. state-issued motorcycle license or endorsement on a current U.S. state driver’s license to operate a motorcycle in Europe,” said Herbert Nold, U.S. Army Garrison Rheinland-Pfalz Safety specialist. “Additionally, riders are required to complete a four-hour approved U.S. Army in Europe motorcycle orientation course and pass a 30-question written test to receive a USAREUR-AF motorcycle license.”

The joint regulation also states that motorcycle riders will wear: “a helmet fastened under the chin, which meets all the American National Standards Institute” guidelines and, shatter-proof or shatter-resistant eye protection

Besides a helmet and eye protection, anytime a Soldier, civilian employee, family member or contractor pulls out of a parking spot, they are required to wear full-finger gloves made of leather or other abrasion-resistant material and over-the-ankle footwear “of sturdy leather and have a good, oil-resistant sole.”

Riders must also have on a long-sleeved shirt or jacket and full-length trousers any time they’re riding the motorcycle, according to the regulation. Those requirements apply both on and off a military installation.

“One of the things that’s popped up recently is what riders have to wear when they come onto an installation,” said Larry Strickland, USAG Rheinland-Pfalz Safety chief.

The regulations stipulate all Soldiers will wear “a vest, jacket, upper garments or motorcycle clothing that incorporates fluorescent and highly reflective material when operating or riding as a passenger on a motorcycle, moped, motorbike, ATV or similar vehicle at all times on or off post. Military uniforms, including physical fitness gear designed to be reflective, do not meet the criteria.”

“Army civilians, family members and contractors will wear fluorescent and reflective outer garments at all times when riding on an installation,” according to the same regulation.

“We highly encourage all civilian employees, including our local national employees, to wear fluorescent safety gear when riding on post as well,” Strickland said. “It’s just good motorcycle riding common sense.”

The U.S. military motorcycle regulations differ greatly from the host nation laws, Nold said.

“Unfortunately in Germany, there is only an obligation to wear a helmet,” he said. “But, more and more Insurance companies are beginning to reduce their accident payouts when riders are found not to have protective clothing but obvious injuries, which could have been prevented with protective attire.”

Strickland said the regulation also applies to “other vehicles with motorcycle-type engines” like Spyders and other three-wheeled vehicles.

For those who have questions on proper safety attire and equipment for motorcyclists riding on Army installations, please check with the garrison safety office at DSN 541-2300.

Please follow and like us:
Pin Share

Andy’s Harley-Davidson shuts down after 60 years of business

by Jacob Holley from https://www.grandforksherald.com

Andy’s Harley-Davidson will close its doors in August after 60 years of business
Andy’s Harley-Davidson will close on Aug. 1 – its 60th anniversary of business.

Andy’s Harley-Davidson will be closing Aug. 1, its 60th anniversary, after the business struggled through the last year amid COVID-19.

The pandemic took its toll on the business in 2020, as customers were staying inside and not traveling. Owner Denny Anderson said the showroom floor was empty most days, but the service department was still drawing in customers. In fact, the service department was the only thing keeping the business afloat last year.

“There was hardly anybody coming in,” Anderson said. “Everybody was staying home, except for when people were sitting at home looking at their motorcycle sitting in their garage and probably wanted to get it going again.”

The business was started by Anderson’s father in 1961. Back then, it didn’t exclusively sell Harley-Davidson motorcycles.

“We sold Triumph and Norton motorcycles,” Anderson said. “We didn’t take Harley-Davidson on until 1975.”

Anderson began working at his father’s business in 1978. He started out by sweeping floors, then moved to stocking oil and then cleaning and working on motorcycles until he eventually took over ownership duties from his father.

The microchip shortage also had an impact on Andy’s Harley-Davidson. The COVID-19 pandemic put a halt on the production of semiconductors, which are needed to make microchips. Microchips are needed to make motorcycles and many motorcycle accessories, which caused a shortage in stock. It has made selling to the few people who came into Andy’s Harley-Davidson even more difficult.

“It’s still difficult to get parts and accessories and (things like that),” Anderson said. “You can’t get something when somebody needs it, and sometimes they get a little upset. They’re kind of feeling that all over wherever they do business.”

With less money coming in and limited options, Anderson jumped at an opportunity; Harley-Davidson offered him a buyout, but he had to decide quickly. He spoke with his accountant, and that was all the deliberation he had time to do.

“I had less than a week to decide, otherwise the offer was off the table,” Anderson said.

He heard through rumblings of Harley-Davidson offering buyouts to other dealership owners in 2020 due to pandemic hardships, although the specifics of those buyouts are not publicly known.

“I caught wind of it through other dealers, and just inquired about it through our district manager,” Anderson said. “They kept it kind of quiet, which was kind of odd.”

Anderson said he wants potential customers to know he and his staff will do all they can to help any potential customers until Andy’s Harley-Davidson, located at 2756 N. Washington St., closes on Aug. 1. He is thankful for 60 years of support from Grand Forks citizens.

“I appreciate all of their business over the years,” Anderson said.

Please follow and like us:
Pin Share