Skip to main content
Tag

emissions

Troublesome news for motorcyclist community in Europe

By General Posts

Threats from Europe

The last few months have seen troublesome news for the motorcyclist community in Europe. Yesterday, the website motorious.com reported on a new threat to motorcyclists in Paris, France. Officials there are taking aim at motorcycles and using sound pollution as the justification. According to the report, “Paris authorities have been experimenting with sound radars as a way to fight excessive noise pollution in the city. Such devices allow police to pinpoint which motorcycle is emitting more decibels than is allowed, then fine the rider.”

This news for Paris comes on the heels of a Politico report late last year, that the European Commission has plans to dramatically change emission requirements on vehicles. While motorcycles were not included in the initial blueprint, fears are high in Europe. A ban on internal combustion engines “Would be a disaster,” said Michael Lenzen of the German Motorcyclists’ Association.

Don’t forget that in 2020, the Federation of European Motorcyclists’ Associations (FEMA), issued a warning about end-of-life vehicle directives. Such a policy would require the collection and destruction of motorcycles that have come to the end of their life. At the time, Wim Taal, FEMA’s communications officer said, “Inclusion of motorcycles in the scope of the directive could also mean a serious threat to historical motorcycles. These bikes are especially dependent upon available and affordable original spare parts to keep them in working order. And who wants to see old-timers disappear into state approved demolishing facilities?”

The Motorcycle Riders Foundation (MRF) is committed to working with and supporting our partners in Europe. As MRF President Kirk “Hardtail” Willard has repeatedly warned, “Policy ideas that first appear in Europe have a history of popping up in the United States.” The MRF is dedicated to opposing policies that destroy the motorcycling lifestyle. Thank you for your continued support as we fight to maintain our rights and freedoms.

Do you really think it couldn’t happen here?

To read the motorious.com article click here.

To read the politico.com story click here.

About Motorcycle Riders Foundation: The Motorcycle Riders Foundation (MRF) provides leadership at the federal level for states’ motorcyclists’ rights organizations as well as motorcycle clubs and individual riders.
See Website at: http://mrf.org/

NCOM Biker Newsbytes for January 2022

By General Posts

Industry & Legislative Motorcycle News from USA and the world

Compiled & Edited by Bill Bish with photos from the Bob T. Collection

National Coalition of Motorcyclists (NCOM) News provides updates on motorcycle industry, market, legislation, rights of bikers, motorcyclists in USA, and motorcycle news from around the world.

ABOUT AIM / NCOM: The National Coalition of Motorcyclists (NCOM) is a nationwide motorcyclists rights organization serving over 2,000 NCOM Member Groups throughout the United States, with all services fully-funded through Aid to Injured Motorcyclist (AIM) Attorneys available in each state who donate a portion of their legal fees from motorcycle accidents back into the NCOM Network of Biker Services (www.ON-A-BIKE.com / 800-ON-A-BIKE).

CLICK HERE To Read the latest NCOM News on Bikernet.com

CLICK Here to Subscribe to our Free Weekly Newsletter

Try the Climate Quiz by CO2 Coalition

By General Posts

The Great Climate Change Debate is one of the “hottest” issues before the public and policy makers today.

How much do you know about the subject?

Or possibly, the real question is one attributed to American humorist Will Rogers: “It ain’t what you don’t know that gets you into trouble, it’s what you know for sure that just ain’t so.”

Find out your Climate IQ by taking our Climate Quiz: the answers may surprise you.

CLICK HERE To Take the Climate Quiz Now

The CO2 Coalition was established in 2015 as a 501(c)(3) for the purpose of educating thought leaders, policy makers, and the public about the important contribution made by carbon dioxide to our lives and the economy.

Royal Enfield Successfully Completes Quest For The South Pole

By General Posts

90° SOUTH – Quest For The Pole is a success! Two riders successfully trekked across Antarctica to the South Pole on Royal Enfield Himalayan motorcycles.

90° SOUTH – QUEST FOR THE POLE, first-of-its-kind expedition on Royal Enfield Himalayans, commemorates 120 years of adventure and exploration on motorcycles.

Milwaukee, WI (Wednesday, December 22, 2021) – Royal Enfield, the world’s oldest motorcycle brand in continuous production since 1901, has tested the endurance of man and machine time and again, and last week, it made history once again by successfully completing the 90° SOUTH Expedition, the quest for the South Pole on the Royal Enfield Himalayan. This extraordinary endeavor is a tribute to the brand’s 120-year commitment to pure motorcycling, and to the courage and resilience of countless riders and explorers who have made history on two wheels.

On December 16, 2021, two riders Santhosh Vijay Kumar and Dean Coxson reached the geographic South Pole in 15 days, making the ambitious attempt a reality.

The team arrived at Novo in Antarctica from Cape Town for four days of acclimatization, loading of supplies, checking equipment and the motorcycles. From Novo, the team covered an overland distance of 3200 km (1988 miles) over the next 9 days braving extreme weather conditions with temperatures between -30° to -25°C (-22° to -13°F) and wind speed of 60 km/h (37 mph), towards Ross Ice Shelf.

The Royal Enfield Himalayans and crew arrived at the geographic South Pole on December 16, 2021. (The team is in communication via satellite phone, hence the low-resolution image.)

The Ross Ice Shelf was the designated start point for the riders, however, an unexpected blizzard forced the team to alter their course. Instead of starting the ride from 86 South, the team started the 400-km (250-mile) ride from 87 degrees South. Despite a few initial roadblocks and a slight detour, the expedition team completed the quest by reaching the South Pole on December 16, 2021.

For this expedition, two Royal Enfield Himalayan motorcycles were modified in-house, with functional upgrades to be able to navigate snow and ice, and function under extreme conditions in Antarctica. The motorcycles were ridden on a compacted snow track from the Ross Ice Shelf to the South Pole, to reduce motorcycle drag and limit emissions to an absolute minimum. Royal Enfield is consciously ensuring no footprint is left behind by the expedition team except wheel tracks that will be quickly lost to snow drift. In line with our #LeaveEveryPlaceBetter initiative, the team is ensuring all waste including human waste is brought back for appropriate disposal.

The team is currently heading towards the western part of Antarctica, Union Glacier, from where they will fly out to Punta Arenas, Chile.

Minimal changes were made to the 90° SOUTH Royal Enfield Himalayans; smaller countershaft sprockets (15- to 13-tooth) increase low-end torque and stronger alternators enable the team to run heated gear.

About Royal Enfield
The oldest motorcycle company in continuous production in the world, Royal Enfield made its first motorcycle in 1901.

Studded tires, a tubeless setup and low tire pressure will only do so much–riding in snow is no easy task.

Royal Enfield North America (RENA) is headquartered in Milwaukee, Wisconsin, and is developing a growing network of more than 140 dealers in North America, including the contiguous U.S., Canada and Puerto Rico.

RENA currently offers the all-new Meteor 350, Himalayan and the 650 Twins (INT 650 and Continental GT 650) motorcycles, along with a range of Genuine Motorcycle Accessories and apparel.

For more information on Royal Enfield North America, visit www.RoyalEnfield.com/us/en/, www.Instagram.com/RoyalEnfield_NA, www.Facebook.com/RoyalEnfieldNorthAmerica.

NCOM Biker Newsbytes for December 2021

By General Posts

Industry & Legislative Motorcycle News from USA and the world
Compiled & Edited by Bill Bish

National Coalition of Motorcyclists (NCOM) News provides updates on motorcycle industry, market, legislation, rights of bikers, motorcyclists in USA, and motorcycle news from around the world.

The National Coalition of Motorcyclists (NCOM) is a nationwide motorcyclists rights organization serving over 2,000 NCOM Member Groups throughout the United States, with all services fully-funded through Aid to Injured Motorcyclist (AIM) Attorneys available in each state who donate a portion of their legal fees from motorcycle accidents back into the NCOM Network of Biker Services (www.ON-A-BIKE.com / 800-ON-A-BIKE).

CLICK HERE To Read the December 2021 News from NCOM

Join the Cantina – CLICK HERE To Subscribe

Climate Dogma Killed Biden’s “Build Back Better”

By General Posts

by Michael Shellenberger

A half trillion dollars to subsidize renewables would have raised energy prices, worsened inflation, and undermined decarbonization. But what do we do now?

The centerpiece of President Joe Biden’s legislative agenda is dead. Senator Joe Manchin today announced that he could not support Biden’s “Build Back Better” legislation which consisted of $1.7 trillion in new spending and would have added $158 billion to the national debt over the next decade, according to the nonpartisan Congressional Budget Office. The largest component of spending, $570 billion, was for renewables, electric cars, and other climate change investments.

Progressives, environmentalists, and Democrats are furious with Sen. Manchin, but it was their own climate and renewables dogmatism that doomed the legislation. Democratic Senators could have written legislation that expanded nuclear energy and natural gas, the two main drivers of decarbonization, which are strongly supported by Manchin, and Republicans, but instead investments went overwhelmingly to solar panels, wind turbines, and electric cars.

It’s true that there were good things in Build Back Better, and that one of the worst climate provisions, the Clean Energy Performance Program, was already removed. Build Back Better included a tax credit for existing nuclear power plants, funding for advanced nuclear fuels, funding for fusion R&D, and financial support for communities hurt by the transition to renewables.

But the money for nuclear would not have made much if any difference to the operating of nuclear plans. Nuclear plants in California, Massachusetts and New York are being shut down, despite already being profitable, for ideological reasons. Legislatures in less anti-nuclear states like Illinois, New Jersey, and Connecticult step in to save their plants when they need to. And higher electricity prices due to natural gas shortages are making nuclear plants in other states even more profitable.

Of Build Back Better’s $550 billion for climate and energy, the vast majority of it was for weather-dependent renewables and their enabling infrastructure, including $29 billion for a “green bank” program to finance renewables and $10 billion for rural electric cooperatives to switch to renewables. Such subsidies were being offered despite years of false claims by many of the legislation’s sponsors and advocates that solar and wind were already cheaper than grid electricity.

Most dangerously, Build Back Better would have undermined electricity reliability, raised energy prices, and made the U.S. more dependent on foreign energy imports. Over-reliance on weather-dependent renewables in Texas and California, and under-investment in reliable, weather-independent nuclear and natural gas plants, led directly to deadly blackouts in those states.

I testified as much to this problem to Manchin’s Senate Commitee on Energy and Natural Resources, and Sen. Manchin made clear today that the role of renewables in making electricity expensive and unreliable was one of his top concerns. “The main thing that we need is dependability and reliability,” he said this morning. “If not, you’ll have what happened in Texas and California.” In his statement, Manchin said, “If enacted, the bill will also risk the reliability of our electric grid and increase our dependence on foreign supply chains.”

Adding weather-dependent energy sources can only make grids more resilient if significantly more money is spent maintaining reliable power sources to make up for their lost revenue and lost operation hours. That’s what Germany has done, deciding to burn more coal rather than continue operating its nuclear plants, which it’s shutting down, or rely too heavily on imported natural gas.

Manchin is also right that Build Back Better would increase dependence on energy imports. Over 80% of the world’s solar panels are made in China by incarcerated Uighyr Muslims living in concentration camps and against whom the Chinese government is committing “genocide,” according to the U.S. State Department.

Build Back Better contained incentives for the return of solar manufacturing to the U.S., but they were far too small to compete with solar panels made by incarcerated people in China’s already-built and heavily-subsidized mega-factories. Nor did they deal with the coming solar panel waste crisis.

“We have been energy independent for the first time for the first time in 60, 70 years or more,” noted Manchin, “and we should not have to depend on other parts of the world to give us the energy, or be able to hold us hostage for the energy, or the foreign supply chains that we need for the products we need every day.”

Everywhere in the world that solar and wind are deployed at scale they increase electricity prices dramatically. California increased its electricity prices seven times more than the rest of the U.S. over the last decade. Germany has the highest electricity prices in Europe, and is breaking new records with the energy shortage caused by lack of adequate natural gas supplies globally.

And now the entire world is paying the price of climate alarmism and renewables dogmatism. Climate shareholder activism and the ESG “sustainable” investment movement caused governments and private sector actors to underinvest in oil and gas production and over-invest in weather-dependent renewables. The result is historic shortages of natural gas and oil.

For the last several weeks Europen and Asian nations have been breaking records for the cost of electricity, due to shortages of natural gas supplies. Oil prices are set to rise to $125 per barrel next year and $150 in 2023, and U.S. winter natural gas prices will be 30% higher this year. Even nuclear-heavy France, which became over-invested in renewables and natural gas, and under-invested in nuclear, is seeing record electricity prices.

But what then, does it mean for climate change? And what should be done to safeguard American energy supplies going forward?

Energy Poverty Kills

By General Posts

From Center for Industrial Progress by Alex Epstein

Last week we looked at the need for a process of producing energy that is cheap, plentiful, and reliable—and we saw that solar and wind cannot produce cheap, reliable energy.

How Germany embraced solar and wind and ended up in energy poverty

Let’s take a look at this in practice. Germany is considered by some to be the best success story in the world of effective solar and wind use, and you’ll often hear that they get a large percentage of their energy from solar and wind.

You can see here on this chart how this claim was made and why it’s not accurate.

First of all, this is just a chart of electricity. Solar and wind are only producing electricity and half of Germany’s energy needs also include fuel and heating. So solar and wind never contribute half as much to Germany’s energy needs as this chart would imply.

But that’s not the biggest problem. What you notice here is that there’s certain days and times where there are large spikes, but there are also periods where there’s relatively little. What that means is that you can’t rely on solar and wind ever. You always have to have an infrastructure that can produce all of your electricity independent of the solar and wind because you can always go a long period with very little solar and wind.

So then why are the solar and wind necessary? Well, you could argue that they’re not and that adding them onto the grid will impose a lot of costs.

In Germany, electricity prices have more than doubled since 2000 when solar and wind started receiving massive subsidies and favorable regulations, and their electricity prices are three to four times what we would pay in the U.S. (Because of its low reliability, solar, and wind energy options require an alternative backup—one that’s cheap, plentiful, and reliable—to make it work, thus creating a more expensive and inefficient process.)

Nuclear and hydro

Fossil fuels are not the only reliable sources. There are two others that don’t generate CO2 that are significant and are more limited, but still significant contributors. Those are hydroelectric energy and nuclear energy.

Hydroelectric energy can be quite affordable over time, but it’s limited to locations where you have the right physical situation to produce hydroelectric power.

Nuclear is more interesting because nuclear doesn’t have the problems of hydro but it’s been very restricted throughout history so today in the vast majority of cases it’s considerably more expensive than say electricity from natural gas. This may change in the future and one thing we’ll discuss under policy is how we need to have the right policies so that all energy technologies can grow and flourish, if indeed the creators of those technologies can do it.

The reality of energy poverty: a story

To illustrate just how important it is to have cheap, plentiful, and reliable energy, I want to share a story I came across while doing research for my book, The Moral Case for Fossil Fuels. This is a story about a baby born in the very poor country of Gambia.

The baby was born underweight and premature, but not in such a way that would be a big problem in say, the United States. In the United States, the solution would have been obvious: incubation. This technology would almost certainly bring this baby up to be completely healthy, and if you met the baby later in life you would never know that there had ever been a problem.

Unfortunately, in the Gambia, in this particular hospital, they needed something that billions of people in the world do not have, and that is reliable electricity.

Without reliable electricity, the hospital didn’t even contemplate owning an incubator, the one thing this baby desperately needed to survive.

Without access to this technology, the baby could not survive on her own, and sadly, she died. I think this story reminds us of what it means to have access to cheap, plentiful, and reliable energy, and how having more energy gives us the ability to improve our lives.

To summarize what we discussed, if you can’t afford energy you don’t have energy, and if energy is scarce or unreliable, then you don’t have energy when you need it. It’s not just enough to have energy, the energy and the process to create it has to be cheap, plentiful, and reliable.

Custom LiveWire One Motorcycles Debut at Autopia 2099 in Los Angeles

By General Posts

SMCO custom LiveWire One

Reimagined Electric Motorcycles Launch the Future of Customization

LOS ANGELES, CA (December 9, 2021) – The customization potential of the LiveWire One™ electric motorcycle was on full display on Saturday, Dec. 4 at Autopia 2099, a new and dedicated EV event held at Optimist Studios in Los Angeles designed to showcase electric cars, trucks, motorcycles, bicycles, and other mobility solutions. The event featured more than 80 vehicles, from home-built and conversion EVs to brand new cars and trucks, plus a display of what the event organizers called retrofuturism. Two custom motorcycle builders, SMCO and Earle Motors, presented the first fully customized LiveWire One motorcycles, both of which originated in Los Angeles, a city rapidly becoming LiveWire’s most successful market.

“The custom bikes showcased at Autopia make a big statement on behalf of LiveWire,” said Ryan Morrissey, Chief Electric Vehicle Officer. “Personalization has always been an element of motorcycle culture, and this weekend SMCO and Earle Motors demonstrated the customization potential of LiveWire One. These custom bikes and components are early indicators of our intent to incorporate limited edition builds and accessories into the digital bike builder on LiveWire.com.”

SMCO: LiveWire One Hooligan Racer
Brothers Aaron and Shaun Guardado started racing as young teenagers, first in shifter karts and then in high performance import cars before they turned their attention to motorcycles. They founded SMCO in 2010 to sell branded T-shirts and started building custom competition motorcycles in their Long Beach, Calif., shop to back up the brand and feed their appetite for racing and performance. Now in their mid-30s, the brothers have built serious Harley-Davidson flat trackers and performance bikes for hooligan racing, and even converted a pair of Harley-Davidson® Street Rod® motorcycles into snow bikes for a winter hill climb at the ESPN X Games.

“When we got our hands on the LiveWire One, we immediately wanted to race it,” said Aaron Guardado.

This past July, Shaun and Aaron entered a pair of LiveWire One bikes in the Roland Sands Super Hooligan Championship at the Laguna Seca race course in California. The series is open to almost any motorcycle, and for the event the bikes were stripped of lighting but were otherwise stock.

“The bikes are so fast and so much fun to ride, but we wanted to find ways to improve on that performance,” said Aaron. “We started by reducing rotating mass with a set of carbon fiber wheels from BST. Then we removed all the stock bodywork and used it to make molds for our own lightweight carbon fiber body pieces. We also designed our own rear-set foot controls to put us in a more-aggressive posture for road racing the bike.”

The SMCO race-prepped LiveWire One bikes were displayed this past weekend at Autopia in the unpainted carbon bodywork.

“This project really pushed us into some new technology,” said Aaron. “We learned to use CAD and a 3D printer to create the rear sets, for example.”

All of the carbon bodywork created by the Guardado brothers uses the stock mounting points on a LiveWire One, and if there’s interest from other owners, the parts may show up for sale in the future.

Earle Motors Custom LiveWire One

Earle Motors: E/MULHOLLAND CUSTOM
When designer Alex Earle needs to unwind, he often does it on his LiveWire One electric motorcycle.

“I’ve spent a lot of time riding off road, but I discovered the LiveWire One was the perfect stress-relief street ride,” said Earle, who teaches powersports design at the ArtCenter College of Design in Pasadena, Calif. “I live near the base of Mulholland Drive, a famous and very curvy road winding from Los Angeles up into the mountains. On weekends it’s nuts with cars and bikes, but on an evening during the week nobody is there. It’s like my private road. Unlike an internal combustion bike, the LiveWire One is quiet, and smooth, and cool. I can make a run up Mulholland, or Decker Canyon Road, stop at Old Place or the Rock Store. It’s a great escape.”

Earle Motors is more of an outlet for Earle’s creativity than it is a business, and he turned that creative design bent on his LiveWire One, in a very dramatic way.

“Initially this bike was intimidating, because it’s electric,” said Earle. “There’s no exhaust, for example, which is always an easy starting point for customization. And no fuel tank. I had two goals in mind – to consolidate the design and adjust the ergonomics for my own comfort. I want it to fit like a tailored suit.”

Earle replaced most of the bodywork with pieces of his own design, created in composite on a 3D printer, except for the “fuel tank” in front of the seat, which covers tightly packed electronics that can’t be reshaped. He removed the rear fender and lighting, and replaced the tail section with one he formed of welded steel.

“I painted the electronics cover, which looks like a fuel tank, in Synthetic Haze, a gray-to-blue fade developed during World War II to help airplanes appear less visible in the sky, which lowers the profile of the entire bike,” said Earle. “I filled in the space below that cover with a new finned piece that wraps around in front of the seat. The fins are the same shape as those on the battery case in the center of the bike.”

The part Earle removed incorporates air scoops to cool electronic components, and to replace that cooling capacity he created hollow galleries within the fins in which coolant might circulate. Two small hoses on the show bike would carry that coolant to a finned heat exchanger located between the forks. To create this part, Earle made detailed drawings, and had the entire motorcycle digitally scanned by Mimic 3D. His drawing and the scan was handed off to PROTOTYP3, a firm founded by two of his former students, who recreated it in CAD and then made the part in one piece with a 3D printer.

“It was amazing that when I got the part the holes lined up perfectly with the mounting points on the bike.” said Earle. “Right now, this is an idea, not a functional feature. I have no way of testing it, but I designed it so that I think it could be functional. The next step would be to 3D print it in aluminum.”

The lower bodywork behind the front wheel is shaped to be an air curtain to smooth flow around the battery case. Its bright orange color is meant to draw the eye down and lower the perceived profile of the bike. Earle removed the stock headlamp and its nacelle to fit three LED lights.

“The new tail section and a custom motard-style seat I designed raise the seat height several inches, which is perfect for my six-foot three-inch frame,” said Earle. “Saddlemen covered the seat in black leather, and it looks great. I also installed a chrome handlebar that’s lower than stock, chrome because it doesn’t get scuffed up when I transport the bike.”

A final custom detail can be found on a logo Earle created for a new charging port cover, which combines the number 23 – which he has always used on his competition-style customs – with an elk antler design that’s also used by the Old Place on Mulholland.

“Some of the inspiration for this project comes from my students, who show up in class with these computers they have built themselves, and they are liquid cooled,” said Earle. “People have been hot rodding motorcycles the same way for 70 years, but how will that happen in the future, when bikes are electric? How will this generation customize a bike? They can 3D print their own parts. They could liquid cool the electronics. I’m hoping this project gets on Instagram and some 17-year-old in Portugal sees it and gets a spark of inspiration. That will be the future of customization.”

###

About LiveWire
More than a motorcycle, LiveWire plans to redefine electric. Drawing on its DNA as an agile disruptor from the lineage of Harley-Davidson, capitalizing on a decade of learnings in the EV sector and the heritage of the most desirable motorcycle brand in the world. With an initial focus on the urban market, LiveWire will pioneer the electric motorcycle space, and beyond. With a dedicated focus on EV, LiveWire plans to develop the technology of the future and to invest in the capabilities needed to lead the transformation of motorcycling. LiveWire expects to benefit from Harley-Davidson’s engineering expertise, manufacturing footprint, supply chain infrastructure, and global logistics capabilities. Innovating by design and attracting industry-leading talent, LiveWire will be headquartered virtually, with initial hubs in Silicon Valley, CA (LiveWire Labs) and Milwaukee, WI.

For LiveWire career opportunities please see LiveWire.com/careers

For more information regarding LiveWire products visit: LiveWire.com

Energy Clarity: Our need for cheap, plentiful, reliable energy

By General Posts

By Alex Epstein From Center for Industrial Progress

When making energy choices, there are three major criteria that need to be considered:

1. Is it cheap? Simply put, if you can’t afford energy, then you don’t have energy.

2. Is it plentiful? If energy is scarce, then many people will have little to no energy.

3. Is it reliable? If energy is unreliable, then you won’t have it when you need it.

In other words, energy is only valuable to the extent that it is cheap, plentiful, and reliable.
And to make it that way, we have to discover cheap, plentiful, reliable processes for generating energy.

Energy is a process

Energy is a process. Whether it’s coal, oil, gas, solar, wind, we describe them as materials, but they’re really processes. The materials are just one part of the process, but the whole process can include things like mining, refining, manufacturing, transportation, operation, maintenance, and disposal.

And then you have to look at how the whole process adds up. When we see something in the marketplace being cheaper or more expensive that reflects the whole process.

The general reason why certain forms of energy are not adopted is because the process to produce them is too expensive or it’s not reliable.

Let’s look at some examples of this.

Jimmy Fallon’s irrefutable case against “renewables”

For this first example, I’m going to let comedian Jimmy Fallon do the talking.

“New Scientist Magazine reported on Wednesday that in the future, cars can be powered by hazelnuts. That’s encouraging considering an eight ounce jar of hazelnuts costs about nine dollars. Yeah, I got an idea for a car that runs on bald eagle heads and Faberge eggs.”

So you may be thinking, “Isn’t hazelnut energy renewable? Doesn’t it come from the sun? Isn’t the sun free and forever? What’s going on here?” It’s all about the process.

While we don’t have to pay the sun, we do have to pay for the land, the labor, and many other inputs necessary to make hazelnut energy. And with hazelnuts, the process to produce them is very costly. The same turns out to be true for many alternatives.

Bandit Lights an Xmas Fire

By General Posts

Bandit’s Cantina Episode 96 : a 2021 Christmas story

by K.Randall Ball

Bandit looked around at the dozen or so kids and looked at the sleek classic chopper with highbars he was building. The Knucklehead engine and transmission were now in place.

Marko approached and whispered something into Bandit’s ear, “Exactly,” Bandit added.

It was the week after Thanksgiving. Marko disappeared for a minute and returned with a couple of large boxes marked, “Xmas.”

“We need to do something to brighten Christmas for these kids. I’m going to paint the Chopper red and white for the holidays.” said Bandit.

CLICK HERE To Read the Christmas Episode of Bandit’s Cantina – The Series.

Join the Cantina to read all the Episodes – a live ever-growing series.

https://www.bikernet.com/pages/cantina_the_series.aspx