One-Off Honda VF500C Magna Prides Itself with Tasty Retro Livery

By September 19, 2020General Posts

by Silvian Secara from https://www.autoevolution.com

Germans never fail to amaze us with their fascinating displays of top-grade engineering.

Let me tell you, ANX Prototypes’ Nick Xiromeritis is no stranger to the automotive industry. Over the course of several years, this Detroit-born petrolhead’s career would carry him all around the globe. After spending a good chunk of time working for Mazda in Japan, he took off to Paris, where he was employed by Renault.

As of today, he lives in Cologne, Germany. Xiromeritis founded his very own workshop a few years ago, while his interests gradually shifted towards motorcycles. He shares the workspace with none other than JvB Moto’s Jens vom Brauck, a gifted aftermarket surgeon that’ll happily tackle just about any two-wheeled custom exploit.

For a clear demonstration of Nick’s abilities, we’ll be having a quick look at one of his spectacular undertakings. The project is based on Honda’s feral 1983 VF500C, otherwise known as V30 Magna. Needless to say, this bad boy loves its intricate retro-styled livery!

Before we go into any details about the build itself, we’ll start by reminding ourselves of the donor’s main specs. This fiendish piece of machinery is brought to life by a ruthless four-stroke V4 powerplant, with a total of 16 valves and as many as four 34 mm (1.34 inches) Keihin carburetors. The liquid-cooled DOHC leviathan boasts a compression ratio of 11.0:1 and a respectable displacement of 498cc. Additionally, it has a glorious redline of 12,500 rpm.

At around 11,500 revs, this nasty animal is capable of delivering up to 68 bhp, along with a torque output of 32 pound-feet (43 Nm) at 10,500 rpm. The engine’s force travels to a chain final drive by means of a six-speed transmission. Ultimately, this whole shebang enables VF500C to reach a top speed of 122 mph (197 kph) and run the quarter mile in just 12.8 seconds.

Up front, the entire structure is supported by a set of air-assisted telescopic forks that allow 5.5 inches (140 mm) of travel. A single shock absorber handles suspension duties on the opposite end, permitting up to 4.53 inches (115 mm) of rear wheel travel. Stopping power is taken care of by twin 255 mm (10 inches) brake discs at the front, joined by a drum setup at the rear.

Now, Xiromeritis’ one-off entity features a plethora of repurposed components from other bikes. A Honda VF1000’s front end modules, including the 16” Comstar wheel, triple clamp and 41 mm (1.61 inches) forks were all transplanted onto his V30 Magna. You will also find a VF1000’s clip-on handlebars and braking units, along with a larger radiator from a VF750.

On the other end, he installed a pair of fully-adjustable shocks, VF750’s exhaust tips and a 17” wheel, as well as a Cagiva 125’s rear-mounted foot pegs and controls. Furthermore, we notice a Kawasaki AR 125’s fuel tank and a leather saddle from Ducati’s Pantah.

ANX Prototypes’ mastermind also equipped a healthy dose of custom goodness, such as the new tail section and aluminum front fairing. As a result of his surgical interventions, the VF500C experienced a whopping weight reduction of approximately 73 lbs (33 kg).

All things considered, this magnificent machine does a pretty sweet job at looking unique! I’ll have to say that I’m stoked to find out what Nick Xiromeritis might come up with in the future.